|
[1]
|
Modelling the hardness of weld metal in the submerged arc welding of low carbon steel plates: addition of CR2O3 nanoparticles
|
|
Advances in Materials and …,
2022 |
|
|
|
[2]
|
Study on mass concentration and morphology of SMAW fume particles with a new covered electrode using nano-CaTiO3 as an arc stabilizer
|
|
Journal of Manufacturing …,
2022 |
|
|
|
[3]
|
Investigations on the weld metal properties of nanoparticle-embedded low-fume SMAW electrodes
|
|
Transactions of the Indian …,
2022 |
|
|
|
[4]
|
The effect of Al2O3 Nano-particles coated with manganese oxide on the microstructure and mechanical properties of low carbon steel using GMAW process
|
|
… Processes in Materials …,
2021 |
|
|
|
[5]
|
Materials Performance and Characterization
|
|
2021 |
|
|
|
[6]
|
تأثیر نانو ذرات آلومینای روکش شده با اکسید منگنز بر ریزساختار و خواص مکانیکی فولاد کم کربن در فرآیند جوشکاری GMAW
|
|
2021 |
|
|
|
[7]
|
Effect of Boehmite Nanoparticles Surface Adsorbed with Vanadium on the Microstructure and Hardness of the Melted Zone in the Submerged Arc Welding Process
|
|
Journal of …,
2021 |
|
|
|
[8]
|
Improving Impact Toughness for Welding Joints of Steel by Adding TiO2 Nanoparticales
|
|
2020 |
|
|
|
[9]
|
Co-based Superalloy (Stellite 6) Powder with Added Nanoparticles to be Molten by PTA
|
|
2020 |
|
|
|
[10]
|
Effect of adding TiO2 nanoparticles on the impact toughness for welding joints of mild steel
|
|
2020 |
|
|
|
[11]
|
Analysis and predicting the effect of ZrO2 nano-particles on penetration and HMZ in GMAW of low carbon steel using fuzzy logic
|
|
Journal of Welding …,
2020 |
|
|
|
[12]
|
اثر نوع فلاکس فعال کننده سطحی بر پروفیل جوش، پیچیدگی زاویه ای ناشی از جوشکاری A-TIG فولاد زنگ نزن دوفازی AISI 2205
|
|
مجله علمی-پژوهشی علوم و …,
2020 |
|
|
|
[13]
|
واکاوی و پیش بینی تأثیر نانوذرات ZrO2بر عمق نفوذ و سختی ناحیه ذوب شده فولاد کم کربن در فرایندGMAW با استفاده از منطق فازی
|
|
2020 |
|
|
|
[14]
|
Microstructural Study for Optimization of Ce Content of Austempered Ductile Iron (ADI) Weld Metal
|
|
2019 |
|
|
|
[15]
|
Cr6+ reduction in welding fumes by nano composite coatings on stainless steel manual metal arc welding electrodes
|
|
Process Safety and Environmental Protection,
2018 |
|
|
|
[16]
|
Effect of Ti Addition on the Microstructure and Mechanical Properties of Weld Metals in HSLA Steels
|
|
Journal of Materials Engineering and Performance,
2018 |
|
|
|
[17]
|
Influence of nano-sized flux materials in the reduction of the Cr (VI) in the stainless steel welding fumes
|
|
Journal of Manufacturing Processes,
2018 |
|
|
|
[18]
|
Progress in Solar Energy and Engineering Systems
|
|
2017 |
|
|
|
[19]
|
Modeling width of Weld in SAW with Adding Nano Material
|
|
2017 |
|
|
|
[20]
|
Experimental investigation and optimization analysis of weld penetration in SAW of mild steel plates of solar fin coated with TiO2/Cr2O3 nano-particles by fuzzy logic
|
|
Progress in Solar Energy and Engineering Systems,
2017 |
|
|
|
[21]
|
Rutile Electrodes Enhanced with TiO2 Nanoparticles
|
|
Advanced Materials Research,
2016 |
|
|
|
[22]
|
Rutile Electrodes Enhanced with TiO2 Nanoparticles.
|
|
Advanced Materials Research,
2016 |
|
|
|
[23]
|
Modification of cellulose and rutile welding electrode coating by infiltrated TiO2 nanoparticles
|
|
Metals and Materials International,
2016 |
|
|
|
[24]
|
EFFECT OF NANOMATERIAL ADDITION USING GMAW AND GTAW PROCESSES
|
|
Rev. Adv. Mater. Sci.,
2016 |
|
|
|
[25]
|
Modeling of weld height in gas metal arc welding process in the presence of TiO 2 Nano-Particles using artificial neural network
|
|
2015 |
|
|
|
[26]
|
Welding Fumes Reduction by Coating of Nano TiO< sub> 2 on Electrodes
|
|
Journal of Materials Processing Technology,
2015 |
|
|
|
[27]
|
Modeling and optimization of dilution in SAW in the presence of Cr2O3 nano-particles
|
|
The International Journal of Advanced Manufacturing Technology,
2015 |
|
|
|
[28]
|
The application of imperialist competitive algorithm for optimization of deposition rate in submerged arc welding process using TiO2 nano particle
|
|
Journal of Mechanical Science and Technology,
2015 |
|
|
|
[29]
|
Welding Fume Reduction by Nano-Alumina Coating on Electrodes–Towards Green Welding Process
|
|
Journal of Cleaner Production,
2015 |
|
|
|
[30]
|
مدل‌سازی ارتفاع جوش در فرآیند جوشکاری قوس الکتریکی با گاز محافظ در حضور نانوذرات TiO2 توسط شبکه‌ی عصبی مصنوعی
|
|
مهندسی مکانیک مدرس,
2015 |
|
|
|
[31]
|
Optimization of the Depth of Penetration by Welding Input Parameters in SAW Process Using Response Surface Methodology
|
|
Metallurgical and Materials Transactions B,
2015 |
|
|
|
[32]
|
Obtaining the creep constitutive parameters for the layers of butt-welded 1.25Cr0.5Mopipe
|
|
Modares Mechanical Engineering,
2015 |
|
|
|
[33]
|
Welding fumes reduction by coating of nano-TiO2 on electrodes
|
|
Journal of Materials Processing Technology,
2015 |
|
|
|
[34]
|
The application of imperialist competitive algorithm for optimization of deposition rate in submerged arc welding process using TiO 2 nano particle
|
|
2015 |
|
|
|
[35]
|
Modeling of weld height in gas metal arc welding process in the presence of TiO2 Nano-Particles using artificial neural network
|
|
2015 |
|
|
|
[36]
|
Strategies for Controlling Welding Fumes at the Source-A Review.
|
|
Applied Mechanics & Materials,
2014 |
|
|
|
[37]
|
Strategies for Controlling Welding Fumes at the Source-A Review
|
|
2014 |
|
|
|
[38]
|
Combined effect of TiO2 nanoparticles and input welding parameters on the weld bead penetration in submerged arc welding process using fuzzy logic
|
|
The International Journal of Advanced Manufacturing Technology,
2014 |
|
|
|
[39]
|
Predicting the combined effect of TiO2 nano-particles and welding input parameters on the hardness of melted zone in submerged arc welding by fuzzy logic
|
|
Journal of Mechanical Science and Technology ,
2013 |
|
|
|
[40]
|
Effect of combining Cr2O3 nano-particles and welding input parameters on the HAZ width in SAW process
|
|
2013 |
|
|
|
[41]
|
Effect of combining Cr2O3 nano-particles and welding input parameters on the heat affected zone width in submerged arc welding process
|
|
NULL
2012 |
|
|
|
[42]
|
Experimental investigation and optimization analysis of weld penetration in SAW of mild steel plates of solar fin coated with TiO2/Cr2O3 nano-particles by …
|
|
A Kalhor
|
|
|