Circuits and Systems

Volume 7, Issue 9 (July 2016)

ISSN Print: 2153-1285   ISSN Online: 2153-1293

Google-based Impact Factor: 0.48  Citations  

Design and Analysing the Various Parameters of CMOS Circuit’s under Bi-Triggering Method Using Cadence Tools

HTML  XML Download Download as PDF (Size: 1273KB)  PP. 2622-2632  
DOI: 10.4236/cs.2016.79227    2,148 Downloads   5,256 Views  Citations

ABSTRACT

Reducing the power and energy required by the device/circuit to operate is the main aim of this paper. Here the new design is implemented to reduce the power consumption of the device using the triggering pulses. The proposed triggering method uses a complementary MOS transistor (pMOS and nMOS) as a voltage divider and ground leakage suppressor (i.e.); these designs are named as Trig01 and Trig10 designs. In Trig01 design the pair of CMOS is placed in the voltage divider part; similarly in Trig10 design the pair of CMOS is placed at the ground leakage suppressor part. Standard CMOS gates like NOT, NAND, NOR, EX-OR etc. are designed with these technologies and these gates are designed with 180 nm technology file in the cadence tool suite; compared to the normal CMOS gates, the Bi-Trig gate contains 4 inputs and 2 outputs. The two extra inputs are used as Bi-Trig control signaling inputs. There are 2 control inputs and thus 22 = 4 combination of controlling is done (i.e.); both pMOS and nMOS are ON, both pMOS and nMOS are OFF, pMOS ON and nMOS OFF and pMOS ON and nMOS ON. Depending on the usage of the circuit, the mode of operation is switched to any one of the combination. If the output of the circuit is not used anywhere in the total block, that specified circuit can be switched into idle mode by means of switched OFF both the pMOS and nMOS transistor in the control unit. This reduces the leakage current and also the power wastage of the circuits in the total block. Bi-Trig controlled circuit reduces the power consumption and leakage power of the circuit without affecting a performance of the circuits.

Share and Cite:

Sridevi, A. , Lakshmiprabha, V. and Prabhu, N. (2016) Design and Analysing the Various Parameters of CMOS Circuit’s under Bi-Triggering Method Using Cadence Tools. Circuits and Systems, 7, 2622-2632. doi: 10.4236/cs.2016.79227.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.