Author(s)

Wei Zhang^1,2

¹Mine Management Division, Department of Mining & Mineral Resources, Chinalco China Copper Corporation Limited, Beijing, China.
²Department of Mining and Materials Engineering, McGill University, Montreal, Canada.

The pulp and froth zones are the main components of froth flotation as it defines both quality of the end product and overall efficiency. The importance of the properties of the two zones, which include pulp hydrodynamics, froth bubble coalescence rate, water overflow rate, air recovery, etc., is being increasingly recognized. The properties are depending not only on the type and concentration of the frother but also on the nature and amount of the particles present in the flotation system, and as well as the frother-particle interactions and potentially of bubble-particle interactions. To date, there is no specific criterion to quantify pulp and froth properties through the interactions between frothers and particles because the various related mechanisms occurring in the pulp and froth are not fully understood. Linking the properties to the metallurgical performance is also challenged. In order to better understand the effect of these issues in flotation, in this review paper, the past and recently published articles relevant to characterizations of pulp and froth properties are widely reviewed; the findings and the gap of knowledge in this area are highlighted for further research.

Flotation, Frothers, Bubble Surface Area Flux, Bubble Coalescence, Gas Holdup, Hydrophobicity

Zhang, W. (2016) The Effects of Frothers and Particles on the Characteristics of Pulp and Froth Properties in Flotation—A Critical Review. Journal of Minerals and Materials Characterization and Engineering, 4, 251-269. doi: 10.4236/jmmce.2016.44023.