Author(s)

O. Achugasim^*, I. E. Ekpo

Department of Pure and Industrial Chemistry, University of Port Harcourt, Port Harcourt, Nigeria.

Two solvent mixtures: n-pentane/n-hexane and n-heptane/n-octane at ten different percentage ratios were used to dissolve 2.5 g of vacuum distilled Anthan crude oil residue (500°C). The crude oil/n-alkane mixture in different conical flasks was stoppered, shaked mechanically and allowed to stand overnight. The resultant solution was subsequently filtered using a vacuum pump to afford the different weights of the residue (asphaltenes). The result of the weights of asphaltenes obtained at the different ratios of solvent mixtures showed that the highest amount of precipitate was obtained at 100% n-pentane solvent. Also there was a sharp increase in the amount of asphaltenes precipitated when the percentage ratio of n-pentane to n-hexane precipitant was 40:60 and when the ratio of n-heptane to n-octane precipitant was 30:70. A good understanding of the contribution of the different n-alkane solvents in the precipitation of asphaltenes is very necessary to flow assurance of crude oils in terms of solid precipitation.

Asphaltenes, Precipitants, n-Heptane, n-Octane, Crude Oil, Binary Mixtures

Achugasim, O. and Ekpo, I. (2015) Precipitation of Heavy Organics (Asphaltenes) from Crude Oil Residue Using Binary Mixtures of n-Alkanes. Advances in Chemical Engineering and Science, 5, 96-101. doi: 10.4236/aces.2015.51010.