Journal of Materials Science and Chemical Engineering

Volume 2, Issue 9 (September 2014)

ISSN Print: 2327-6045   ISSN Online: 2327-6053

Google-based Impact Factor: 0.72  Citations  

Research on Interlayer Alloys for Transient Liquid Phase Diffusion Bonding of Single Crystal Nickel Base Superalloy DD6

HTML  XML Download Download as PDF (Size: 2740KB)  PP. 12-19  
DOI: 10.4236/msce.2014.29002    3,987 Downloads   5,180 Views  Citations

ABSTRACT

Transient Liquid Phase Diffusion bonding (TLP bonding) is an effective method to achieve excellent joint of DD6, which is a new generation single crystal superalloy to manufacture aero-engine turbine blades. In this paper, the interlayer alloys for DD6 TLP bonding were designed. The alloy foils with thickness 40 μm ~ 60 μm, width 4 mm were prepared by using a single roller rapid solidification apparatus and the TLP bonding of DD6 was conducted. Then the joint microstructure and alloying elements diffusion behaviors were analyzed. The results indicate that microstructures of interlayer alloys prepared are fine and homogeneous, the melting point range of alloys from 1070°C to 1074°C and their melting temperature interval is merely 20°C, when the chemical composition of alloys are 1.5 ~ 2.0Cr, 3.2 ~ 4.0W, 3.7 ~ 4.5Co, 2.2 ~ 3.0Al, 0.7 ~ 1.0Mo, 3.2B, remain Ni (wt%). When the welding parameters are bonding temperature 1200?C, holding time 8.0 hour and welding pressure 0.3 MPa, the compacted joints obtained and the microstructure of TLP bonding seams were similar to base metal. The bonding joint is composed of weld center zone, isothermal solidification zone and diffusion-affected zone. Within joint, the elements diffusion is sufficient and borides in the diffusion zone are fewer.

Share and Cite:

Zhai, Q. , Xu, J. , Lu, T. and Xu, Y. (2014) Research on Interlayer Alloys for Transient Liquid Phase Diffusion Bonding of Single Crystal Nickel Base Superalloy DD6. Journal of Materials Science and Chemical Engineering, 2, 12-19. doi: 10.4236/msce.2014.29002.

Cited by

[1] Mechanosynthesis of β-Cr2N using BN as the Nitrogen Source
Garcia, K Navarro-Mtz… - Science of …, 2022
[2] Microstructure of a chrome-boriding of induction hardened DIN Ck 45 steel
Materials Testing, 2022
[3] 인코넬 600 합금의 천이액상확산접합에서 삽입합금 조성에 따른 접합부 미세조직과 부식특성의 변화
2021
[4] Kesikli elektrolitik kaplama yöntemiyle üretilen Ni-B-TiN MMC'lerin aşınma ve korozyon davranışları
2020
[5] Effects of Mo and B Additives on Hardness and the Resistance of Cu–Ni Alloy to Wear, Corrosion and Corrosive Wear
2020
[6] A Review: Interlayer Joining of Nickel Base Alloys
2020
[7] Investigate the influence of bonding temperature in transient liquid phase bonding of SiC and copper
Ceramics International, 2017

Journals Menu
Follow SCIRP
Contact us
+1 323-425-8868
customer@scirp.org
WhatsApp +86 18163351462(WhatsApp)
Click here to send a message to me 1655362766
Paper Publishing WeChat

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.