|
[1]
|
Effect of spark plasma sintering and reinforcements on the formation of ultra-fine and nanograins in AA2024-TiB2-Y hybrid composites
|
|
Progress in Natural Science: Materials …,
2022 |
|
|
|
[2]
|
A literature survey on effect of various types of reinforcement particles on the mechanical and tribological properties of aluminium alloy matrix hybrid nano composite
|
|
Materials Today: Proceedings,
2022 |
|
|
|
[3]
|
Electrochemical Studies of the Corrosion Behavior of Al/SiC/PKSA Hybrid Composites in 3.5% NaCl Solution
|
|
Journal of Composites …,
2022 |
|
|
|
[4]
|
Tribological investigations into pin-on-disc tribometer under dry sliding conditions at various temperature ranges
|
|
Proceedings of the …,
2022 |
|
|
|
[5]
|
Evaluation of wear and corrosion properties of FSWed aluminum alloy plates of AA2020-T4 with heat treatment under different aging periods
|
|
Reviews on Advanced Materials Science,
2022 |
|
|
|
[6]
|
Evaluation of the influence of alumina nano-particle size and weight composition on the corrosion resistance of monolithic AA1070 aluminium
|
|
Materials Today: Proceedings,
2022 |
|
|
|
[7]
|
Corrosion Behaviour of Mg, Graphite-, B4C and Ti-Reinforced Hybrid Aluminium Composites
|
|
Journal of The Institution of Engineers (India): Series C,
2022 |
|
|
|
[8]
|
A Combined approach of Grey Relational Analysis (GRA) and Principal component Analysis (PCA) for development of input parameters on wear characterization of …
|
|
Scientia Iranica,
2022 |
|
|
|
[9]
|
NUMERICAL SIMULATION OF DYNAMIC MECHANICAL PROPERTIES OF GRAPHENE-REINFORCED ALUMINUM MATRIX COMPOSITES
|
|
Materials and Technology,
2022 |
|
|
|
[10]
|
Synthesis of Microstructure and Tribological Properties of AMMCs Fabricated by Two Different Powder Metallurgy Routes
|
|
… Journal of Vehicle …,
2022 |
|
|
|
[11]
|
Corrosion behavior of Al/SiC composite prepared by powder metallurgy in chloride environments
|
|
Journal of Bio-and Tribo-Corrosion,
2022 |
|
|
|
[12]
|
A review of recent research on rare earth particulate composite materials and structures with their applications
|
|
Transactions of the Indian …,
2021 |
|
|
|
[13]
|
АСПЕКТЫ ФОРМИРОВАНИЯ СТРУКТУРЫ ДИСПЕРСНО-УПРОЧНЕННОГО МЕТАЛЛИЧЕСКОГО КОМПОЗИЦИОННОГО МАТЕРИАЛА, ПОЛУЧЕННОГО …
|
|
Труды ВИАМ,
2021 |
|
|
|
[14]
|
Microstructure and Corrosion Performance of Aluminium Matrix Composites Reinforced with Refractory High-Entropy Alloy Particulates
|
|
2021 |
|
|
|
[15]
|
Fly Ash, Rice Husk Ash as Reinforcement with Aluminium Metal Matrix Composite: A Review of Technique, Parameter and Outcome
|
|
2021 |
|
|
|
[16]
|
Effect of Heat treatment on Fatigue Behavior of B4C and Copper Coated short Basalt fiber Reinforced Al 2014 Based Hybrid Composite
|
|
International Journal of Engineering and Advanced Technology,
2021 |
|
|
|
[17]
|
Corrosion Behaviour of Bamboo Leaf Ash-Reinforced Nickel Surface-Deposited Aluminium Metal Matrix Composites
|
|
2021 |
|
|
|
[18]
|
Particulate Mollusc Shells as Reinforcements for Aluminium Matrix Composites: A Review
|
|
2021 |
|
|
|
[19]
|
Microstructures and mechanical properties of in-situ TiB2/Al− xSi− 0.3 Mg composites
|
|
2021 |
|
|
|
[20]
|
Evaluation of Corrosion Properties of Al2O3 and SiC Reinforced Aluminium Metal Matrix Composites Using Taguchi's Techniques
|
|
2021 |
|
|
|
[21]
|
Effect of Heat Treatment on the Corrosion Behaviour of Nickel Surface-Deposited Agro-Reinforced Metal Matrix Composites
|
|
2021 |
|
|
|
[22]
|
Optimization of erosion wears of Al–Mg–Si–Cu–SiC composite produced by the PM method
|
|
2021 |
|
|
|
[23]
|
Effect of ZrB2 on microstructural, mechanical and corrosion behaviour of aluminium (AA7178) alloy matrix composite prepared by the stir casting route
|
|
2021 |
|
|
|
[24]
|
تأثير نسبة التدعيم بأكاسيد الحديد على قابلية أستخدام خردة الألمنيوم كأقطاب تضحية في الحماية الكاثودية
|
|
2020 |
|
|
|
[25]
|
A Series-elastic Robot for Back-pain Rehabilitation
|
|
2020 |
|
|
|
[26]
|
Comparison of mechanical properties of Al6063 alloy with ceramic particles
|
|
2020 |
|
|
|
[27]
|
Characteristics of Al-Alloy/Seashell (SESB) Composites in Acidic and Alkaline Environments
|
|
2020 |
|
|
|
[28]
|
Surface characterization and mechanical behavior of aluminum based metal matrix composite reinforced with nano Al2O3, SiC, TiO2 particles
|
|
2020 |
|
|
|
[29]
|
A review of ceramic/bio-based hybrid reinforced aluminium matrix composites
|
|
2020 |
|
|
|
[30]
|
Effect of Age Hardening Treatment on the Corrosion Resistance of AA6061, SiC and Fly ash Powder Metallurgy Composites
|
|
2020 |
|
|
|
[31]
|
Investigation of Corrosion Behavior of SiC-Reinforced Al 6061/SiC Metal Matrix Composites Using Taguchi Technique
|
|
2020 |
|
|
|
[32]
|
Comparative Study of Aluminium—Alumina Composite Prepared by Mechanical Mixing and Oxidation
|
|
2020 |
|
|
|
[33]
|
Characterization of corrosion behavior of aluminum welds reinforced with copper powder
|
|
2020 |
|
|
|
[34]
|
EVALUATION OF TENSILE STRENGTH AND CORROSION BEHAVIOUR OF AL 7075∕ TIB2∕ CR2O3 COMPOSITE
|
|
International Journal of Mechanical Engineering and Technology (IJMET),
2019 |
|
|
|
[35]
|
Corrosion behavior of hybrid coconut shell powder and silica carbide reinforced aluminium composite towards aggressive biofilm attack
|
|
2019 |
|
|
|
[36]
|
Microstructural, mechanical and corrosion properties of aluminium MIG welds reinforced with copper powder
|
|
2019 |
|
|
|
[37]
|
A Comprehensive Study of Aluminium Based Metal Matrix Composite Reinforced with Hybrid Nanoparticles
|
|
Metallofiz. Noveishie Tekhnol,
2019 |
|
|
|
[38]
|
Tensile Behavior of Aluminium2014 Reinforced with Boron Carbide and Copper Coated Short Basalt Fiber Based Hybrid Composites
|
|
2019 |
|
|
|
[39]
|
Mechanical and Corrosion Properties of AlCu Matrix Hybrid Composite Materials
|
|
2019 |
|
|
|
[40]
|
Effect of Heat Treatment on Tensile and Corrosion Properties of LM6 Hybrid Metal Matrix Composite Reinforced with Cenosphere and Red Mud
|
|
2019 |
|
|
|
[41]
|
Study of electric discharge machining parameters for Al 6063/Al2O3 metal matrix composites using Taguchi Approach
|
|
International Journal of Research in Engineering Technology,
2019 |
|
|
|
[42]
|
Corrosion Polarization Behavior of Al-SiO2 Composites in 1M and Related Microstructural Analysis
|
|
2019 |
|
|
|
[43]
|
Microstructural, Tribological and Mechanical Properties Evolution of ZrSiO4/A4047 Surface Composite Fabricated through Friction Stir Processing
|
|
2019 |
|
|
|
[44]
|
Influence of Al2O3 and SiO2 nano-particles on hardness and corrosion resistance of aluminum alloy (Al-4.5% Cu-1.5% Mg)
|
|
2019 |
|
|
|
[45]
|
FONKSİYONEL DERECELENDİRİLMİŞ BRONZ MATRİSLİ SERAMİK TAKVİYELİ KOMPOZİT MALZEMELERİN ÜRETİMİ VE KARAKTERİZASYONU
|
|
2019 |
|
|
|
[46]
|
Development of rare-earth oxides based hybrid AMCs reinforced with SiC/Al2O3: mechanical & metallurgical characterization
|
|
2019 |
|
|
|
[47]
|
Investigating the Wear and Hardness of Aluminium LM25 Alloy Reinforced With Nano Al2O3 and Nano TiB2
|
|
2019 |
|
|
|
[48]
|
Microstructure and Corrosion Characteristics of In Situ Aluminum Diboride Metal Matrix Composites
|
|
2019 |
|
|
|
[49]
|
Investigation of Hardness and Tribological Behaviour of Aluminium Alloy LM30 Reinforced with Silicon Carbide, Boron Carbide and Graphite
|
|
2019 |
|
|
|
[50]
|
MECHANICAL AND WEAR CHARACTERISATION OF QUARRY TAILINGS REINFORCED A6063 METAL MATRIX COMPOSITES
|
|
2019 |
|
|
|
[51]
|
Development of AA2024 Matrix Composites Reinforced with Micro Yttrium through Cold Compaction with Superior Mechanical Properties
|
|
2019 |
|
|
|
[52]
|
Development and characterization of stainless steel fiber-based copper-free brake liner formulation: A positive solution for steel fiber replacement
|
|
2019 |
|
|
|
[53]
|
Effect of Al2O3 nanoparticles on corrosion behavior of aluimnum alloy (Al-4.5 wt% Cu-1.5 wt% Mg) fabricated by powder metallurgy
|
|
2019 |
|
|
|
[54]
|
Evaluation on Microstructure and Mechanical Behaviour of Al6061-Al2O3-Gr Hybrid Composites
|
|
2019 |
|
|
|
[55]
|
The microstructure and wear behaviour of garnet particle reinforced Al matrix composites
|
|
2019 |
|
|
|
[56]
|
PHYSICS OF STRENGTH AND PLASTICITY
|
|
2019 |
|
|
|
[57]
|
Brachiating Robot Analysis and Design
|
|
2019 |
|
|
|
[58]
|
Synthesis of novel aluminium metal matrix composite using industrial metallic waste: Impact on wear and corrosion behaviour
|
|
2019 |
|
|
|
[59]
|
MECHANICAL AND TRIBOLOGICAL ENHANCEMENT OF AA6063 ALUMINUM ALLOY USING SOLID SPHERE FLY ASH PARTICLES REINFORCEMENT
|
|
2018 |
|
|
|
[60]
|
Experimental Investigation and Analysis of Glass Fiber Epoxy Reinforced with Rubber and Wood Powder
|
|
2018 |
|
|
|
[61]
|
Synthesis of metal matrix composites through stir casting process-a review
|
|
2018 |
|
|
|
[62]
|
Mechanical and wear behavior of LM25 Aluminium matrix hybrid composite reinforced with Boron carbide, Graphite and Iron oxide
|
|
2018 |
|
|
|
[63]
|
A Study on the Corrosion and Mechanical Properties of an Al6063 Reinforced With Egg Shell Ash and Rice Husk Ash
|
|
2018 |
|
|
|
[64]
|
Corrosion and wear behaviour of nano Al2O3 reinforced copper metal matrix composites synthesized by high energy ball milling
|
|
Particulate Science and Technology,
2018 |
|
|
|
[65]
|
Study on Mechanical Properties of Rice Husk Ash and Fly Ash Reinforcement in Aluminium (Al 6061) Metal Matrix Composites
|
|
2018 |
|
|
|
[66]
|
Effects of In Situ Intermetallics on the Microstructural Array and Saline Corrosion Performance of Cast Al/WCp Composites
|
|
Journal of Materials Engineering and Performance,
2018 |
|
|
|
[67]
|
Design And Fabrication Of Fatigue Test Rig And Preliminary Investigation On Flax Composite Beam
|
|
Materials Today: Proceedings,
2018 |
|
|
|
[68]
|
A REVIEW ON FABRICATION, MECHANICAL CHARACTERIZATION OF ALUMINIUM METAL MATRIX COMPOSITES
|
|
INTERNATIONAL JOURNAL OF CURRENT ENGINEERING AND SCIENTIFIC RESEARCH (IJCESR),
2018 |
|
|
|
[69]
|
Corrosion behavior of ZrC particles reinforcement with Al-12Si composites by weight loss method using acidic media
|
|
Bulletin of the Polish Academy of Sciences. Technical Sciences,
2018 |
|
|
|
[70]
|
Mechanical deformation behavior of aged Al-Cu alloys and innovative Al-Cu metal matrix composite fabricated using stir-casting technique
|
|
Materials Today: Proceedings,
2018 |
|
|
|
[71]
|
An Experimental Study and Analysis of the Mechanical Properties of Titanium Dioxide Reinforced Aluminum (AA 5051) Composite
|
|
Materials Today: Proceedings,
2018 |
|
|
|
[72]
|
Effect of Ceramic and Metallic Reinforcement on Mechanical, Corrosion, and Tribological Behavior of Aluminum Composite by Adopting Design of Experiment Through Taguchi Technique
|
|
2018 |
|
|
|
[73]
|
Distinct Alp/Sip composites affecting its densification and mechanical behavior
|
|
Journal of Alloys and Compounds,
2018 |
|
|
|
[74]
|
A Review on Fabrication and Mechanical Characterization of Aluminium Metal Matrix Composites
|
|
JOURNAL OF ADVANCEMENT IN ENGINEERING AND TECHNOLOGY,
2018 |
|
|
|
[75]
|
Mathematical modeling of the corrosion response of aluminium 5052/tungsten carbide/graphite hybrid composite: Mathematische Modellierung der …
|
|
Materialwissenschaft und Werkstofftechnik,
2018 |
|
|
|
[76]
|
Effect of alumina nano-particle size and weight content on the corrosion resistance of AA1070 aluminum in chloride/sulphate solution
|
|
Results in Physics,
2018 |
|
|
|
[77]
|
Development of empirical relationship for surface roughness during the machining of metal matrix composite
|
|
IOP Conference Series: Materials Science and Engineering,
2018 |
|
|
|
[78]
|
Corrosion Behaviour of Al 7075/Al2O3/Graphite Hybrid Composite in 3.5% Sodium Chloride Solution
|
|
International Journal of Engineering Research & Technology (IJERT),
2018 |
|
|
|
[79]
|
Comparison between Single rare earth and mixed rare earth reinforced Aluminium metal matrix composites on the basis of wear properties
|
|
2018 |
|
|
|
[80]
|
Effect of ceramic and metallic reinforcement on mechanical, corrosion, and tribological behavior of aluminum composite by adopting design of experiment through …
|
|
2018 |
|
|
|
[81]
|
Microstructure & Mechanical Behavior of Graphite Particulates Reinforced Al6082 Alloy Composites
|
|
2018 |
|
|
|
[82]
|
Fabrication and Characterization of Aluminum Metal Matrix Composites Using Rare Earth Metal as an Additive
|
|
2018 |
|
|
|
[83]
|
Mechanical and Tribological characterization of SiC/Co hybrid reinforced 6061 Aluminum alloy composites
|
|
2018 |
|
|
|
[84]
|
Reinforcement of Aluminium AA1100-MIG Welds Using Copper Powder
|
|
2017 |
|
|
|
[85]
|
Processing of aluminium metal matrix composites-a review
|
|
Journal of …,
2017 |
|
|
|
[86]
|
Corrosion polarization behavior and microstructural analysis of AA1070 aluminium silicon carbide matrix composites in acid chloride concentrations
|
|
2017 |
|
|
|
[87]
|
Hardness and microstructure properties of AlCu-B4C/hBN hybrid composites
|
|
2017 |
|
|
|
[88]
|
Influence of Excimer Laser Surface Melting on Microstructure and Corrosion Behaviour of AA6061-T6 Alloy and SiCp/AA6061-T6 Composite
|
|
ProQuest Dissertations Publishing,
2017 |
|
|
|
[89]
|
Study of Mechanical and Corrosive Behaviour of Metal Alloy Composites-Ingrained with Micro and Hybrid Reinforcement
|
|
4th International Conference on Multidisciplinary Research & Practice,
2017 |
|
|
|
[90]
|
Cu− Zn− Al2O3 nanocomposites: study of microstructure, corrosion, and wear properties
|
|
International Journal of Minerals, Metallurgy, and Materials,
2017 |
|
|
|
[91]
|
Investigation of tribological and corrosion properties of CuTi–alumina nanocomposite fabricated by mechanical alloying
|
|
2017 |
|
|
|
[92]
|
Accelerated Short-Term Techniques to Evaluate Corrosion in TiC Reinforced AA6063 Composites
|
|
Journal of Advances in chemistry,
2017 |
|
|
|
[93]
|
PRODUCTION AND MICROSTRUCTURE CHARACTERIZATION OF AA6061 MATRIX ACTIVATED CARBON PARTICULATE REINFORCED COMPOSITE BY FRICTION STIR CASTING METHOD
|
|
Rasayan J. Chem.,
2017 |
|
|
|
[94]
|
Adsorption and thermodynamics properties of acacia tortilis as corrosion inhibitor of aluminum metal matrix composites in acidic medium
|
|
2017 |
|
|
|
[95]
|
MECHANICAL, CORROSION AND WEAR BEHAVIOUR OF STEEL CHIPS AND GRAPHITE REINFORCED Zn-27Al ALLOY BASED COMPOSITES
|
|
2017 |
|
|
|
[96]
|
Fabrication and Testing of Aluminium 6061 Alloy & Silicon Carbide Metal Matrix Composites
|
|
2017 |
|
|
|
[97]
|
Micro/Nano Reinforced Filled Metal Alloy Composites: A Review Over Current Development in Aerospace and Automobile Applications
|
|
Materials Today: Proceedings,
2017 |
|
|
|
[98]
|
Effect of Zirconia Dispersion on Mechanical and Corrosion Properties of Ductile Iron
|
|
Material Science & Engineering International Journal,
2017 |
|
|
|
[99]
|
Processing issues, machining, and applications of aluminum metal matrix composites
|
|
Geosystem Engineering,
2017 |
|
|
|
[100]
|
Evaluation of Wear and Corrosion Properties of AA6061/TiB2 Composites Produced by FSP Technique
|
|
2017 |
|
|
|
[101]
|
Effect of D-Gun sprayed Ceramic Coatings on Aluminum Material to Review Hardness and Corrosion Properties
|
|
2017 |
|
|
|
[102]
|
The Influence of Multipass Friction Stir Processing on the Corrosion Behavior and Mechanical Properties of Zircon-Reinforced Al Metal Matrix Composites
|
|
Materials Science and Engineering: A,
2016 |
|
|
|
[103]
|
TRIBOLOGICAL AND CORROSION BEHAVIOUR OF AL 6063/SIC METAL MATRIX COMPOSITES
|
|
Int J AdvEngg Tech/Vol. VII/Issue II/April-June,
2016 |
|
|
|
[104]
|
Corrosion Behavior of Novel Al-Al2O3 Composites in Aerated 3.5% Chloride Solution
|
|
Journal of Materials Engineering and Performance,
2016 |
|
|
|
[105]
|
Corrosion behaviour of sinter forged aluminium composites during hot deformation
|
|
2016 |
|
|
|
[106]
|
Tribological and corrosion behaviour of Al6063 metal matrix composites. t J. of Adv
|
|
2016 |
|
|
|
[107]
|
Investigation of Corrosion Behavior of Light Weight NanoHybrid Al 6061-ZrO 2–SiC-Gr Composites
|
|
Int. J. Chem. Technol. Res,
2015 |
|
|
|
[108]
|
Considerations Regarding Wetting Conditions in Aluminium-Alumina Composites
|
|
Advanced Materials Research,
2015 |
|
|
|
[109]
|
Wear Behavior of Hybrid (AL+ SIC+ AL2O3) Metal Matrix Composites
|
|
International Journal of Emerging Technology and Advanced Engineering,
2015 |
|
|
|
[110]
|
Corrosion behaviour of aluminium matrix composites reinforced with sintered halloysite nanotubes
|
|
Journal of Achievements in Materials and Manufacturing Engineering,
2015 |
|
|
|
[111]
|
Evaluation of the mechanical properties and corrosion behaviour of coconut shell ash reinforced aluminium (6063) alloy composites
|
|
Leonardo Electronic Journal of Practices and Technologies,
2015 |
|
|
|
[112]
|
Microstructure, mechanical properties and corrosion behaviour of Al–Si–Mg alloy matrix/zircon and alumina hybrid composite
|
|
Forschung im Ingenieurwesen,
2015 |
|
|
|
[113]
|
AN INVESTIGATION OF THE PHYSICAL PROPERTIES OF ALUMINIUM REINFORCED WITH TITANIUM DIOXIDE PARTICLES
|
|
2015 |
|
|
|
[114]
|
MECHANICAL PROPERTIES OF LEAF ASHES REINFORCED ALUMINUM ALLOY METAL MATRIX COMPOSITES
|
|
International Journal of Applied Engineering Research,
2015 |
|
|
|
[115]
|
Aluminium reinforced by WC and TiC nanoparticles (ex-situ) and aluminide particles (in-situ): Microstructure, wear and corrosion behaviour
|
|
Materials & Design,
2015 |
|
|
|
[116]
|
Wear and Corrosion Behavior of Al–Si Matrix Composite Reinforced with Alumina
|
|
Journal of Bio-and Tribo-Corrosion,
2015 |
|
|
|
[117]
|
Corrosion Behaviour of Al2O3p Reinforced Al-Zn-Mg-Cu-Ni-Co Alloy Fabricated via PM
|
|
2015 |
|
|
|
[118]
|
Aluminium matrix hybrid composites: a review of reinforcement philosophies; mechanical, corrosion and tribological characteristics
|
|
Journal of Materials Research and Technology,
2015 |
|
|
|
[119]
|
Corrosion behaviour of groundnut shell ash and silicon carbide hybrid reinforced Al-Mg-Si alloy matrix composites in 3.5% NaCl and 0.3 MH 2 SO 4 solutions
|
|
Leonardo Electronic Journal of Practices and Technologies,
2015 |
|
|
|
[120]
|
Investigation of Corrosion Behavior of Light Weight NanoHybrid Al 6061-ZrO2–SiC-Gr Composites
|
|
International Journal of ChemTech Research,
2015 |
|
|
|
[121]
|
CORROSION BEHAVIOUR OF COLD DEFORMED AND SOLUTION HEAT-TREATED ALUMINA REINFORCED ALUMINIUM MATRIX COMPOSITES IN 0.3 MH 2 SO 4 SOLUTION.
|
|
Acta Technica Corvininesis-Bulletin of Engineering,
2014 |
|
|
|
[122]
|
Mechanical and Corrosion Behaviour of Zn-27A1 Based Composites Reinforced with Groundnut Shell Ash and Silicon Carbide.
|
|
KK Alaneme, BO Fatile, JO Borode - Tribology in Industry,
2014 |
|
|
|
[123]
|
Multi-Objective Optimization in Wire-Cut Electric Discharge Machining of Al 6063/Al2O3 Metal Matrix Composite through Response Surface Methodology
|
|
Applied Mechanics and Materials.,
2014 |
|
|
|
[124]
|
DEFORMED AND SOLUTION HEAT-TREATED ALUMINA REINFORCED ALUMINIUM MATRIX COMPOSITES IN 0.3 MH2so4 SOLUTION
|
|
CBOF COLD - acta.fih.upt.ro,
2014 |
|
|
|
[125]
|
Corrosion and Tribological Studies of Bamboo Leaf Ash and Alumina Reinforced Al-Mg-Si Alloy Matrix Hybrid Composites in Chloride Medium
|
|
International Journal of ELECTROCHEMICAL SCIENCE,
2014 |
|
|
|
[126]
|
Mechanical and corrosion behaviour of Zn-27Al based composites reinforced with groundnut shell ash and silicon carbide
|
|
Tribology in Industry,
2014 |
|
|
|
[127]
|
Influence of rice husk ash–silicon carbide weight ratios on the mechanical behaviour of Al-Mg-Si alloy matrix hybrid composites
|
|
Tribology in industry,
2013 |
|
|
|
[128]
|
Corrosion Behaviour of Al6061-Frit Particulate Metal Matrix Composites in Sodium Chloride Solution
|
|
Journal of Minerals and Materials Characterization and Engineering,
2013 |
|
|
|
[129]
|
Fabrication And Characterization Of Al 6063/Sic Composites
|
|
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering,
2013 |
|
|
|
[130]
|
Fabrication characteristics and mechanical behaviour of rice husk ash–Alumina reinforced Al-Mg-Si alloy matrix hybrid composites
|
|
Journal of Materials Research and Technology,
2013 |
|
|
|
[131]
|
Corrosion and wear behaviour of rice husk ash—Alumina reinforced Al–Mg–Si alloy matrix hybrid composites
|
|
Journal of Materials Research and Technology,
2013 |
|
|
|
[132]
|
Mechanical Behaviour of Cold Deformed and Solution Heat-treated Alumina Reinforced AA 6063 Metal Matrix Composites
|
|
KK Alaneme - criticalthinking.uwi.tt,
2013 |
|
|
|
[133]
|
Mechanical properties and corrosion behaviour of aluminium hybrid composites reinforced with silicon carbide and bamboo leaf ash
|
|
Tribology in Industry,
2013 |
|
|
|
[134]
|
Influence of rice husk ash-silicon carbide weight ratios on the mechanical behaviour of Al-Mg-Si alloy matrix hybrid composites
|
|
Tribology in industry,
2013 |
|
|
|
[135]
|
Processing and synthesis of metal matrix Al 6063/Al2O3 Metal Matrix Composite by stir casting process
|
|
International Journal of Engineering Research and Applications,
2013 |
|
|
|
[136]
|
Influence of Thermomechanical Processing on the Corrosion Behaviour of Aluminium (6063)-SiCp Composites in NaCl and H2SO4 Environment
|
|
Science Journal Ubon Ratchathani University,
2011 |
|
|
|
[137]
|
TRIBOLOGY IN BIOMATERIALS DESIGN AND SELECTION
|
|
EXPERIMENTAL TECHNIQUES,
2011 |
|
|
|
[138]
|
Tuning the Electrochemical Performance of Alumina (Al2o3) and Graphene Oxide (Go) Reinforced Aluminum Metal-Matrix-(Hybrid-) Nanocomposites: A Mechanistic …
|
|
|
|
|
|
[139]
|
Fabrication and characterization of functionally graded bronze matrix ceramic reinforced composite materials
|
|
|
|
|