International Journal of Communications, Network and System Sciences

Volume 5, Issue 3 (March 2012)

ISSN Print: 1913-3715   ISSN Online: 1913-3723

Google-based Impact Factor: 0.66  Citations  h5-index & Ranking

Hardware Design for Low Power Integrated Sensor System

HTML  XML Download Download as PDF (Size: 1615KB)  PP. 141-146  
DOI: 10.4236/ijcns.2012.53018    4,134 Downloads   8,451 Views  Citations

ABSTRACT

An integrated sensor system is implemented using inter-integrated circuit mode (I2C) software, utilizing the PIC182585 MPLAB embedded control system utilizing hardware. The hardware implementation features high level of integration, reliability, high precision, and high speed communications. The system was demonstrated by temperature and CO2 sensors. An extension for Zigbee system is proposed to enhance the security of the integrated system. A bi-directional air/liquid flow sensor is also added to detect the flow magnitude and direction that can be applied to heating, ventilating, and air-conditioning (HVAC), local and national security within subway systems, and medical equipment. The hardware design of the flow sensor included one heating element and two sensing elements to detect the bi-directional flow. Platinum sensors were found to be of high sensitivity and linear characteristics within 0℃ to 100℃ range, and their high temperature coefficient (0.00385 Ω/Ω/℃). Polyimide thin film heater was used as the heating element due to its high throughput and good thermal efficiency. Two bridge circuits were also designed to sense the temperature distribution in the vicinity of the sensing elements. Three high precision instrumentation low power amplifiers with offset voltage ~2.5 μV (50 μV max) were used for the overall design. The system security is also enhanced with the detection of poison gas using Carbon Nanotube devices (CNT). An antenna system was designed, and a frequency shift was detected to designate the type of poison gas used for a general threat.

Share and Cite:

M. Rizkalla, A. Feng, M. Knieser, F. Bowen, P. Salama, B. King, J. Radadia, S. Gadkari and H. Jafarian, "Hardware Design for Low Power Integrated Sensor System," International Journal of Communications, Network and System Sciences, Vol. 5 No. 3, 2012, pp. 141-146. doi: 10.4236/ijcns.2012.53018.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.