Author(s)

Zeineb Zidi¹, Mounir Ltifi^2,3, Idrees Zafar²

¹Laboratory of Physics of Materials and Nanomaterials Applied to Environment (LaPhyMNE), Faculty of Sciences of Gabes, Gabes University, Gabes, Tunisia.
²Department of Civil Engineering, College of Engineering, Al Imam Mohammad Ibn Saud Islamic University, Riyadh, KSA.
³Department of Civil engineering, National Engineering School of Gabes, Gabes University, Gabes, Tunisia.

The current study focused on the utilization of local clay for synthesis and characterization of meta-kaolin based geopolymers with and without nano-silica. The control geopolymers, for a compressive strength of 30 MPa, were optimized by using Liquid/Solid ratio of 0.55, NaOH concentration of 10 M and curing at 80°C. The nano silica was added in an extended range of 1%, 2%, 3%, 5%, 7% and 10%. The synthesized nano-silica metakaolin based geopolymers was investigated by using compressive strength, XRD, XRF, FTIR, SEM, MIP, TG, UV/VIS spectroscopy, in addition to density, water absorption and initial setting times. The results indicated an increase in the compressive strength value with the incorporation of nano-silica in geopolymer mixes until the optimum percentage of 5%, while the 10% addition of nano-silica decreased the compressive strength by 5% as compared to the control geopolymer. The increase in the compressive strength was accredited to the increase in the content of N-A-S-H gel and the amorphous structure as shown by XRD and FTIR analysis. In addition, the optical transmittance analysis, MIP and SEM scans along with the results of density and water absorption have clearly shown the densification of the matrix formed for the optimal percentage of nano-silica. However, the initial setting time was found to reduce substantially with increase of nano-silica content. Moreover, the TG results have shown the 5% nano-added geopolymers to have greater thermal stability as compared to reference geopolymers. Finally, the adopted methodology in this research has shown that 5% nano-silica, is the optimal result for the synthesis and the production of local meta kaolin based geopolymer, with regard to the improvement of physical properties, micro structure and compressive strength.

Geopolymer, Nano-SiO2, Local-Metakaolin, Mechanical Properties, Microstructure Properties

Zidi, Z. , Ltifi, M. and Zafar, I. (2020) Characterization of Nano-Silica Local Metakaolin Based-Geopolymer: Microstructure and Mechanical Properties. Open Journal of Civil Engineering, 10, 143-161. doi: 10.4236/ojce.2020.102013.