Surface Roughness Quality and Dimensional Accuracy—A Comprehensive Analysis of 100% Infill Printed Parts Fabricated by a Personal/Desktop Cost-Effective FDM 3D Printer

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org

Google-based Impact Factor: 0.97
Citations h5-index & Ranking*

Journals Menu

"Surface Roughness Quality and Dimensional Accuracy—A Comprehensive Analysis of 100% Infill Printed Parts Fabricated by a Personal/Desktop Cost-Effective FDM 3D Printer"
written by Mohammad S. Alsoufi, Abdulrhman E. Elsayed,
published by Materials Sciences and Applications, Vol.9 No.1, 2018

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	An initial feasibility study into ray-based slicing for revolving thin-wall parts using a rotary 3D printer
	Rapid Prototyping Journal, 2023

[2]	Parametric Modeling and Optimization of Dimensional Error and Surface Roughness of Fused Deposition Modeling Printed Polyethylene Terephthalate …
	Polymers, 2023

[3]	Impact of processing defects on microstructure, surface quality, and tribological performance in 3D printed polymers
	Journal of Materials …, 2023

[4]	3D-printed orthotics for pediatric lower limb deformities correction
	3D Printing in Podiatric Medicine, 2023

[5]	To predict the surface roughness of Black ABS component with variable parameters by applying the Taguchi method
	Materials Today: Proceedings, 2023

[6]	Animal orthosis fabrication with additive manufacturing–a case study of custom orthosis for chicken
	Rapid Prototyping …, 2022

[7]	미세유체칩 제작을 위한 투명 열가소성 고분자 압출 적층제조 연구
	한국기계가공학회지, 2022

[8]	Additive Manufacturing of Short Silk Fiber Reinforced PETG Composites
	Materials Today …, 2022

[9]	Development of a Fused Deposition Modeling System to Build Form-Fit Joints Using an Industrial Robot
	International Journal of Mechanical …, 2022

[10]	Charakterisierung und Experimentelle Validierung von 3D-druckbarem Elastomer-Polymer als Phantommaterialien für Hybride Medizinische …
	2022

[11]	Experimental Study on the Possibilities of FDM Direct Colour Printing and Its Implications on Mechanical Properties and Surface Quality of the Resulting Parts
	Băncescu… - Polymers, 2022

[12]	Fused filament fabrication and water contact angle anisotropy: The effect of layer height and raster width on the wettability of 3D printed polylactic acid parts
	Chemical Data Collections, 2022

[13]	Customized protective visors enabled by closed loop controlled 4D printing
	Scientific reports, 2022

[14]	ANN modelling of surface roughness of FDM parts considering the effect of hidden layers, neurons, and process parameters
	Advances in Materials …, 2022

[15]	Dimensional and roughness analysis of ABS polymer-based 3D printed nuts and bolts
	Materials Today: Proceedings, 2022

[16]	3D Printing of Paracetamol Suppositories: An Automated Manufacturing Technique for Individualized Therapy
	Pharmaceutics, 2022

[17]	Recent Advancements in Hybrid Investment Casting Process—A Review
	… in Manufacturing Processes and Systems: Select …, 2022

[18]	Characterization of a 3D Printed Self-Powered Micropump Mould for Microfluidics Application
	… Research in Fluid …, 2022

[19]	Ironing process influence on the warping of ABS parts produced by Fused Filament Fabrication
	Procedia Structural …, 2022

[20]	Analysis of Dimensional Accuracy of Fused Filament Fabrication Parts Using Genetic Algorithm and Taguchi Analysis
	Numerical Modelling and Optimization in …, 2022

[21]	APPLICATION OF TAGUCHI METHOD TO OPTIMIZE FUSED DEPOSITION MODELING PROCESS PARAMETERS FOR SURFACE ROUGHNESS
	Jurnal Teknologi, 2022

[22]	Surface roughness testing on 3D printed test bodies
	TEAM2022, 2022

[23]	An Investigation of Cost-effective Rapid Tooling for Fibre Reinforced Polymer Parts Using Low-cost 3D Printing
	2022

[24]	Using Machine Learning Algorithms to Predict the Quality of Parts Fabricated by Low-Cost Metal Material Extrusion Method
	2022

[25]	In-vitro analysis of haemodynamics in stented arteries.
	2022

[26]	Simulation and experimental characterisation of a 3D-printed electromagnetic vibration sensor
	Sensors and Actuators A …, 2022

[27]	Key parameters controlling surface quality and dimensional accuracy: A critical review of FFF process
	Materials and …, 2022

[28]	Effect of Manufacturing Inaccuracies on the Wake Past Asymmetric Airfoil by PIV
	Energies, 2022

[29]	Dimensional accuracy and surface finish of 3D printed polyurethane (PU) dog-bone samples optimally manufactured by fused deposition modelling (FDM)
	Rapid Prototyping Journal, 2022

[30]	Implementation of Taguchi and Genetic Algorithm techniques for prediction of optimal part dimensions for polymeric biocomposites in Fused Deposition …
	International Journal of …, 2022

[31]	Investigating the influence of material extrusion rates and line widths on FFF-printed graphene-enhanced PLA
	Journal of Manufacturing and Materials …, 2022

[32]	Analysing the effects of layer heights and line widths on FFF-printed thermoplastics
	The International Journal of Advanced …, 2022

[33]	Investigating the effects of ironing parameters on the dimensional accuracy, surface roughness, and hardness of FFF-printed thermoplastics
	Journal of Composites Science, 2022

[34]	Materials Requirements in Fused Filament Fabrication: A Framework for the Design of Next‐Generation 3D Printable Thermoplastics and Composites
	Macromolecular Materials and Engineering, 2022

[35]	Parametric Effects of Fused Filament Fabrication Approach on Surface Roughness of Acrylonitrile Butadiene Styrene and Nylon-6 Polymer
	Materials, 2022

[36]	Hot-Wire Investigation of Turbulence Topology behind Blades at Different Shape Qualities
	Processes, 2022

[37]	Print fidelity metrics for additive manufacturing of cement-based materials
	Additive …, 2022

[38]	Fused filament fabrication: a state-of-the-art review of the technology, materials, properties and defects
	International Journal on …, 2022

[39]	Multi-Parameter Optimization of 3D Printing Condition for Enhanced Quality and Strength
	Polymers, 2022

[40]	A precision core drill for transmission electron microscopy sample preparation produced by 3D printing
	Ultramicroscopy, 2022

[41]	Dimensional stability of 3D printed objects made from plastic waste using FDM: Potential construction applications
	Buildings, 2021

[42]	Design and Implementation of a Digital Twin Platform for AM processes
	Procedia CIRP, 2021

[43]	Finite Element Analysis in Fused Deposition Modeling Research: A Literature Review
	2021

[44]	Optimization of CNC turning parameters using face centred CCD approach in RSM and ANN-genetic algorithm for AISI 4340 alloy steel
	2021

[45]	Study of the Surface and Dimensional Quality of the AlSi10Mg Thin-Wall Components Manufactured by Selective Laser Melting
	2021

[46]	Chemical vapor treatment to improve surface finish of 3D printed polylactic acid (PLA) parts realized by fused filament fabrication
	2021

[47]	3D printed polymer positive models for the investment casting of extremely thin-walled single crystals
	2021

[48]	Improvement of Interlayer Adhesion and Heat Resistance of Biodegradable Ternary Blend Composite 3D Printing
	2021

[49]	Design and characterization of a 3D-printed staggered herringbone mixer
	2021

[50]	Improvement of Interlayer Adhesion and Heat Resistance of Biodegradable Ternary Blend Composite 3D Printing. Polymers 2021, 13, 740
	2021

[51]	Accuracy investigation of 3D printed PLA with various process parameters and different colors
	2021

[52]	Investigating the effects of extrusion temperatures and material extrusion rates on FFF-printed thermoplastics
	2021

[53]	A finishing process via ultrasonic drilling for additively manufactured carbon fiber composites
	2021

[54]	Optimization of process parameters in fused deposition modelling of thermoplastics: A review
	2021

[55]	PIV Analysis of Haemodynamics Distal to the Frozen Elephant Trunk Stent Surrogate
	2021

[56]	Analysis of AM Parameters on Surface Roughness Obtained in PLA Parts Printed with FFF Technology
	2021

[57]	Online Convolutional Neural Network-based anomaly detection and quality control for Fused Filament Fabrication process
	2021

[58]	Surface Texture Properties and Tribological Behavior of Additive Manufactured Parts
	Tribology and Surface Engineering for Industrial …, 2021

[59]	Research on desktop 3D Printing Multi-Material New Concepts
	IOP Conference …, 2021

[60]	Fabrication and process parameter optimization of a 3d printer using response surface methodology
	International journal of research in …, 2021

[61]	A Framework to Aid Decision Making for Smart Manufacturing Technologies in Small-and Medium-Sized Enterprises
	2021

[62]	Possibilities for improving the surface quality of structural steels, invar and titanium alloys through reactive electrospark treatment with electrodes of an …
	Journal of …, 2021

[63]	A Study on the Errors of 2D Circular Trajectories Generated on a 3D Printer
	Applied Sciences, 2021

[64]	The Effect of the Structure in Controlling Resistivity and Permittivity of 3D Printed Electromagnetic Analogue Objects
	2020

[65]	Effect of raster inclinations and part positions on mechanical properties, surface roughness and manufacturing price of printed parts produced by fused deposition …
	2020

[66]	Operation and experimental evaluation of a 12-axis robot-based setup used for 3D-printing
	2020

[67]	Radiological characteristics of a new experimental rubber elastomeric polymer used in three-dimensional printing with different infill densities and patterns
	2020

[68]	Numerical and experimental haemodynamic studies of stenotic coronary arteries
	2020

[69]	THE EFFECT OF THE STRUCTURE IN CONTROLLING RESISTIVITY AND PER-MITTIVITY OF 3D PRINTED ELECTRO-MAGNETIC ANALOGUE OBJECTS
	2020

[70]	Pengaruh kecepatan gerak nozel mesin 3d printing terhadap kekasaran permukaan produk persegi berbasis FDM
	2020

[71]	Process parameter investigation for 3D printing of cellular structured parts
	2020

[72]	Shape and Performance Controlled Advanced Design for Additive Manufacturing: A Review of Slicing and Path Planning
	2020

[73]	Mathematical approach for the geometrical deformation of fused deposition modelling build parts
	2020

[74]	Common failures in amateur 3D printing: Becoming familiar with and improving fused filament fabrication processes
	2020

[75]	Geometric considerations for the 3D printing of components using fused filament fabrication
	2020

[76]	Novel Method for the Manufacture of Complex CFRP Parts Using FDM-based Molds
	2020

[77]	Influence of Infill density and Orientation on the Mechanical Response of PLA+ Specimens Produced using FDM 3D Printing
	2020

[78]	Properties of 3D Printable Poly (lactic acid)/Poly (butylene adipate-co-terephthalate) Blends and Nano Talc Composites
	2020

[79]	AN EXPLORATORY STUDY ON THE ACCURACY OF PARTS PRINTED IN FDM PROCESSES FROM NOVEL MATERIALS
	2020

[80]	Current status and future directions of fused filament fabrication
	2020

[81]	Strength and Surface Characteristics of FDM-Based 3D Printed PLA Parts for Multiple Infill Design Patterns
	2020

[82]	Digital twins of plastic-based AM process for process monitoring and connection to production planning
	2020

[83]	3D Printed Biomodels for Flow Visualization in Stenotic Vessels: An Experimental and Numerical Study
	2020

[84]	Design of a mechatronic solution for the protection of personnel professionally exposed to SARS-CoV-2 virus contamination
	2020

[85]	Experimental study of surface roughness, dimensional accuracy and time of fabrication of parts produced by fused deposition modelling
	2020

[86]	Review of Tailoring Methods for Joints with Additively Manufactured Adherends and Adhesives
	2020

[87]	Refinement of a Novel Compact Waveguide
	2019

[88]	Improve Surfaces properties of ABS Products fabricated by fused deposition modeling (FDM) 3D Printing: تحسين خواص الأسطح المصنعة عن طريق الطباعة ثلاثية …‎
	2019

[89]	Characteristics of ABS and PLA Material in 3D Printing for Car Backseat Headrest Hanger/Hook Model
	2019

[90]	Experimental Characterization of the Influence of Nozzle Temperature in FDM 3D Printed Pure PLA and Advanced PLA+
	2019

[91]	Fused deposition modelling: a review
	2019

[92]	Profile and Areal Surface Characterization of Additive Manufacturing Polymer and Metal Parts
	2019

[93]	Analytical and Experimental Investigation into the Relative Influence of Core and Side Parts on Structures Laminated by Fused Deposition Modeling
	International Journal of Precision Engineering and Manufacturing-Green Technology, 2019

[94]	Effect of the ironing process on ABS parts produced by FDM
	Material Design & Processing Communications, 2019

[95]	From 3D models to FDM 3D prints: experimental study of chemical treatment to reduce stairs-stepping of semi-sphere profile
	2019

[96]	Quantifying the Surface Roughness of a 3D Printed Model
	2019

[97]	Optimization of surface roughness in FDM 3D printer using response surface methodology, particle swarm optimization, and symbiotic organism search algorithms
	2019

[98]	Improve Surfaces properties of ABS Products fabricated by fused deposition modeling (FDM) 3D Printing
	2019

[99]	A processing route for dip-coating and characterization of multi-structured ceramic foam
	2019

[100]	Influence of Multi-Level Printing Process Parameters on 3D Printed Parts in Fused Deposition Molding of Poly (lactic) Acid Plus: A Comprehensive Investigation
	2019

[101]	Maximization of FDM-3D-Objects Gonio-Appearance Effects Using PLA and ABS Filaments and Combining Several Printing Parameters:“A Case Study”
	2019

[102]	Maximization of FDM-3D-Objects Gonio-Appearance Effects Using PLA and ABS Filaments and Combining Several Printing Parameters:" A Case Study".
	2019

[103]	Assessing the 3D Printing Precision and Texture Properties of Brown Rice Induced by Infill Levels and Printing Variables
	2019

[104]	Developing protein-based bio-inks for FDM 3D printed microfluidic and millifluidic biosensor applications
	2019

[105]	Shape and Performance Controlled Advanced Design for Additive Manufacturing (ADfAM): A Review of Slicing and Path Planning
	2019

[106]	Improve Surfaces properties of ABS Products fabricated by fused deposition modeling (FDM) 3D Printing: تحسين خواص الأسطح المصنعة عن طريق الطباعة ثلاثية الأبعاد …‎
	Assad… - مجلة العلوم الهندسية و …, 2019

[107]	Mechanical reverse engineering approach for precise measurements of reproducing disc CAM
	2018

[108]	Επιλογή συνθηκών κατεργασίας στη τρισδιάστατη εκτύπωση (FDM) πορωδών τεμαχίων με τη μέθοδο Taguchi
	2018

[109]	Experimental Investigation of Wire-EDM Process Parameters for Surface Roughness in the Machining of Carbon Steel 1017 and Aluminum Alloy 6060
	2018

[110]	Quantitative analysis of 0% infill density surface profile of printed part fabricated by personal FDM 3D printer
	2018

[111]	Bio-Mimetic Design with 3D Printable Composites
	2018

[112]	3D Printing of Functional Assemblies with Integrated Polymer-Bonded Magnets Demonstrated with a Prototype of a Rotary Blood Pump
	Applied Sciences, 2018

[113]	Endüstriyel bir 3 boyutlu yazıcı ile imal edilen ABS malzemeli parçaların boyut hatalarının incelenmesi


[114]	Chemical Data Collections


[115]	An Investigation on Dimensional Accuracy of 3D Printed PLA, PET-G and ABS Samples with Different Layer Heights

[1]	Optimizing surface roughness in soft pneumatic gripper fabricated via FDM: experimental investigation using Taguchi method Multidiscipline Modeling in Materials and Structures, 2024 DOI:10.1108/MMMS-09-2023-0313

[2]	Improving surface smoothness in FDM parts through ironing post-processing Journal of Reinforced Plastics and Composites, 2023 DOI:10.1177/07316844231173059

[3]	Fabrication of multi-layer radar absorbing structures based on continuous fiber 3D printing and thickness correction method Advanced Composite Materials, 2023 DOI:10.1080/09243046.2023.2283681

[4]	Dimensional Error Minimization through Parameter Optimization for 3D Printed Nylon Aramid Composites Using SWARA-CoCoSo and Machine Learning Algorithms Journal of Materials Engineering and Performance, 2023 DOI:10.1007/s11665-023-08608-8

[5]	An initial feasibility study into ray-based slicing for revolving thin-wall parts using a rotary 3D printer Rapid Prototyping Journal, 2023 DOI:10.1108/RPJ-09-2021-0226

[6]	3D Printing of Heart Model as Medical Education Tools Diffusion Foundations and Materials Applications, 2023 DOI:10.4028/p-l0k8s7

[7]	Improving surface smoothness in FDM parts through ironing post-processing Journal of Reinforced Plastics and Composites, 2023 DOI:10.1177/07316844231173059

[8]	Optimization of 3D Printing Parameters of Polylactic-Co-Glycolic Acid-Based Biodegradable Antibacterial Materials Using Fused Deposition Modeling 3D Printing and Additive Manufacturing, 2023 DOI:10.1089/3dp.2022.0340

[9]	Investigation on the accuracy, hardness, and surface roughness of photopolymerization 3D printing technique objects INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022, 2023 DOI:10.1063/5.0135763

[10]	An Investigation on Dimensional Accuracy of 3D Printed PLA, PET-G and ABS Samples with Different Layer Heights Çukurova Üniversitesi Mühendislik Fakültesi Dergisi, 2022 DOI:10.21605/cukurovaumfd.1146401

[11]	Ironing process influence on the warping of ABS parts produced by Fused Filament Fabrication Procedia Structural Integrity, 2022 DOI:10.1016/j.prostr.2022.12.162

[12]	A Study on Material Extrusion Additive Manufacturing of Transparent Thermoplastic Polymer for Microfluidic Chip Fabrication Journal of the Korean Society of Manufacturing Process Engineers, 2022 DOI:10.14775/ksmpe.2022.21.10.106

[13]	Additive Manufacturing of Short Silk Fiber Reinforced PETG Composites Materials Today Communications, 2022 DOI:10.1016/j.mtcomm.2022.104772

[14]	Ironing process influence on the warping of ABS parts produced by Fused Filament Fabrication Procedia Structural Integrity, 2022 DOI:10.1016/j.prostr.2022.12.162

[15]	Ironing process influence on the warping of ABS parts produced by Fused Filament Fabrication Procedia Structural Integrity, 2022 DOI:10.1016/j.prostr.2022.12.162

[16]	Additive Manufacturing of Short Silk Fiber Reinforced PETG Composites Materials Today Communications, 2022 DOI:10.1016/j.mtcomm.2022.104772

[17]	Implementation of Taguchi and Genetic Algorithm Techniques for Prediction of Optimal Part Dimensions for Polymeric Biocomposites in Fused Deposition Modeling International Journal of Biomaterials, 2022 DOI:10.1155/2022/4541450

[18]	Additive Manufacturing of Short Silk Fiber Reinforced PETG Composites Materials Today Communications, 2022 DOI:10.1016/j.mtcomm.2022.104772

[19]	Ironing process influence on the warping of ABS parts produced by Fused Filament Fabrication Procedia Structural Integrity, 2022 DOI:10.1016/j.prostr.2022.12.162

[20]	Chemical vapor treatment to improve surface finish of 3D printed polylactic acid (PLA) parts realized by fused filament fabrication Progress in Additive Manufacturing, 2022 DOI:10.1007/s40964-021-00213-2

[21]	Hot-Wire Investigation of Turbulence Topology behind Blades at Different Shape Qualities Processes, 2022 DOI:10.3390/pr10030522

[22]	Multi-Parameter Optimization of 3D Printing Condition for Enhanced Quality and Strength Polymers, 2022 DOI:10.3390/polym14081586

[23]	Investigating the Effects of Ironing Parameters on the Dimensional Accuracy, Surface Roughness, and Hardness of FFF-Printed Thermoplastics Journal of Composites Science, 2022 DOI:10.3390/jcs6050121

[24]	Recent Advances in Manufacturing Processes and Systems Lecture Notes in Mechanical Engineering, 2022 DOI:10.1007/978-981-16-7787-8_65

[25]	Animal orthosis fabrication with additive manufacturing – a case study of custom orthosis for chicken Rapid Prototyping Journal, 2022 DOI:10.1108/RPJ-03-2021-0054

[26]	Investigating the Influence of Material Extrusion Rates and Line Widths on FFF-Printed Graphene-Enhanced PLA Journal of Manufacturing and Materials Processing, 2022 DOI:10.3390/jmmp6030057

[27]	Üç Boyutlu Baskı ile Farklı Katman Yüksekliklerinde Üretilmiş PLA, PET-G ve ABS Parçaların Boyutsal Doğruluğu Üzerine Bir Araştırma Çukurova Üniversitesi Mühendislik Fakültesi Dergisi, 2022 DOI:10.21605/cukurovaumfd.1146401

[28]	An initial feasibility study into ray-based slicing for revolving thin-wall parts using a rotary 3D printer Rapid Prototyping Journal, 2022 DOI:10.1108/RPJ-09-2021-0226

[29]	Parametric Effects of Fused Filament Fabrication Approach on Surface Roughness of Acrylonitrile Butadiene Styrene and Nylon-6 Polymer Materials, 2022 DOI:10.3390/ma15155206

[30]	Analysing the effects of layer heights and line widths on FFF-printed thermoplastics The International Journal of Advanced Manufacturing Technology, 2022 DOI:10.1007/s00170-022-09810-z

[31]	Investigation of dimensional form errors of parts manufactured with an industrial 3-dimensional printer using ABS material Gümüşhane Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 2022 DOI:10.17714/gumusfenbil.1055034

[32]	Dimensional accuracy and surface finish of 3D printed polyurethane (PU) dog-bone samples optimally manufactured by fused deposition modelling (FDM) Rapid Prototyping Journal, 2022 DOI:10.1108/RPJ-12-2021-0328

[33]	Turbulence topology behind different sections of the wind turbine blade MATEC Web of Conferences, 2022 DOI:10.1051/matecconf/202236700023

[34]	Design and Implementation of a Digital Twin Platform for AM processes Procedia CIRP, 2021 DOI:10.1016/j.procir.2021.11.290

[35]	Online Convolutional Neural Network-based anomaly detection and quality control for Fused Filament Fabrication process Virtual and Physical Prototyping, 2021 DOI:10.1080/17452759.2021.1905858

[36]	Improvement of Interlayer Adhesion and Heat Resistance of Biodegradable Ternary Blend Composite 3D Printing Polymers, 2021 DOI:10.3390/polym13050740

[37]	A finishing process via ultrasonic drilling for additively manufactured carbon fiber composites Rapid Prototyping Journal, 2021 DOI:10.1108/RPJ-10-2019-0260

[38]	Study of the Surface and Dimensional Quality of the AlSi10Mg Thin-Wall Components Manufactured by Selective Laser Melting Journal of Composites Science, 2021 DOI:10.3390/jcs5050126

[39]	Analysis of AM Parameters on Surface Roughness Obtained in PLA Parts Printed with FFF Technology Polymers, 2021 DOI:10.3390/polym13142384

[40]	Turbulent jet stability increased by ribs inside the nozzle – Stereo PIV measurement one diameter past the nozzle MATEC Web of Conferences, 2021 DOI:10.1051/matecconf/202134500006

[41]	Research on desktop 3D Printing Multi-Material New Concepts IOP Conference Series: Materials Science and Engineering, 2021 DOI:10.1088/1757-899X/1193/1/012043

[42]	Dimensional Stability of 3D Printed Objects Made from Plastic Waste Using FDM: Potential Construction Applications Buildings, 2021 DOI:10.3390/buildings11110516

[43]	Investigating the effects of extrusion temperatures and material extrusion rates on FFF-printed thermoplastics The International Journal of Advanced Manufacturing Technology, 2021 DOI:10.1007/s00170-021-07850-5

[44]	A Study on the Errors of 2D Circular Trajectories Generated on a 3D Printer Applied Sciences, 2021 DOI:10.3390/app112411695

[45]	Design and Implementation of a Digital Twin Platform for AM processes Procedia CIRP, 2021 DOI:10.1016/j.procir.2021.11.290

[46]	Radiological characteristics of a new experimental rubber elastomeric polymer used in three-dimensional printing with different infill densities and patterns Journal of Physics Communications, 2020 DOI:10.1088/2399-6528/abd1c3

[47]	An Exploratory Study on the Accuracy of Parts Printed in FDM Processes from Novel Materials Acta Mechanica et Automatica, 2020 DOI:10.2478/ama-2020-0009

[48]	An Exploratory Study on the Accuracy of Parts Printed in FDM Processes from Novel Materials Acta Mechanica et Automatica, 2020 DOI:10.2478/ama-2020-0009

[49]	Analytical and Experimental Investigation into the Relative Influence of Core and Side Parts on Structures Laminated by Fused Deposition Modeling International Journal of Precision Engineering and Manufacturing-Green Technology, 2020 DOI:10.1007/s40684-019-00177-3

[50]	Properties of 3D Printable Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) Blends and Nano Talc Composites Journal of Nanomaterials, 2020 DOI:10.1155/2020/8040517

[51]	3D Printed Biomodels for Flow Visualization in Stenotic Vessels: An Experimental and Numerical Study Micromachines, 2020 DOI:10.3390/mi11060549

[52]	Geometric considerations for the 3D printing of components using fused filament fabrication The International Journal of Advanced Manufacturing Technology, 2020 DOI:10.1007/s00170-020-05523-3

[53]	Experimental study of surface roughness, dimensional accuracy and time of fabrication of parts produced by fused deposition modelling Rapid Prototyping Journal, 2020 DOI:10.1108/RPJ-12-2019-0315

[54]	Review of Tailoring Methods for Joints with Additively Manufactured Adherends and Adhesives Materials, 2020 DOI:10.3390/ma13183949

[55]	Novel Method for the Manufacture of Complex CFRP Parts Using FDM-based Molds Polymers, 2020 DOI:10.3390/polym12102220

[56]	Design of a mechatronic solution for the protection of personnel professionally exposed to SARS-CoV-2 virus contamination 2020 12th International Conference on Electronics, Computers and Artificial Intelligence (ECAI), 2020 DOI:10.1109/ECAI50035.2020.9223138

[57]	An Exploratory Study on the Accuracy of Parts Printed in FDM Processes from Novel Materials Acta Mechanica et Automatica, 2020 DOI:10.2478/ama-2020-0009

[58]	Proceedings of the 12th International Conference on Measurement and Quality Control - Cyber Physical Issue Lecture Notes in Mechanical Engineering, 2019 DOI:10.1007/978-3-030-18177-2_22

[59]	Maximization of FDM-3D-Objects Gonio-Appearance Effects Using PLA and ABS Filaments and Combining Several Printing Parameters: “A Case Study” Materials, 2019 DOI:10.3390/ma12091423

[60]	Assessing the 3D Printing Precision and Texture Properties of Brown Rice Induced by Infill Levels and Printing Variables Food and Bioprocess Technology, 2019 DOI:10.1007/s11947-019-02287-x

[61]	Fused deposition modelling: a review Rapid Prototyping Journal, 2019 DOI:10.1108/RPJ-04-2019-0106

[62]	3D Printing of Functional Assemblies with Integrated Polymer-Bonded Magnets Demonstrated with a Prototype of a Rotary Blood Pump Applied Sciences, 2018 DOI:10.3390/app8081275

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Materials Sciences and Applications

Materials Sciences and Applications

Journals Menu

Home

About SCIRP

Service

Policies