Effect of High Temperatures on the Microstructure of Cement Paste

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Materials Science and Chemical Engineering

ISSN Print: 2327-6045
ISSN Online: 2327-6053
www.scirp.org/journal/msce
E-mail: msce@scirp.org

Google-based Impact Factor: 0.72
Citations h5-index & Ranking*

Journals Menu

"Effect of High Temperatures on the Microstructure of Cement Paste"
written by M. A. Tantawy,
published by Journal of Materials Science and Chemical Engineering, Vol.5 No.11, 2017

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Effect of post-fire lime-saturated water and water–CO2 cyclic curing on strength recovery of thermally damaged high-performance concrete with different silica contents
	Cement and Concrete …, 2023

[2]	Carbonation curing of mortars produced with reactivated cementitious materials for CO2 sequestration
	Journal of Cleaner Production, 2023

[3]	Sewage sludge ash-based mortar as construction material: Mechanical studies, macrofouling, and marine toxicity
	Science of The Total …, 2022

[4]	Waste paper ash as a hydraulic road binder: Hydration, mechanical and leaching considerations
	Journal of Environmental Management, 2022

[5]	Understanding the role of graphene oxide nanoribbons–functionalized carbon nanotubes–graphene oxide (GNFG) complex in enhancing the fire resistance of …
	Construction and Building Materials, 2022

[6]	Properties of concrete subjected to severe accident conditions at Fukushima Daiichi Nuclear Power Plant
	Journal of Advanced …, 2022

[7]	Influence of microwaves in the early stage of alkali activation on the mechanical strength of alkali-activated materials
	Ceramics International, 2022

[8]	Amplitude-Modulation Vibro-Acoustic Technique for Damage Evaluation
	Structural Health …, 2022

[9]	Microstructural and Mechanical Characteristics of Fiber-Reinforced Cementitious Composites under High-Temperature Exposure
	Journal of Materials in …, 2022

[10]	Microstructural study of concrete performance after exposure to elevated temperatures via considering C–S–H nanostructure changes
	High Temperature Materials and …, 2022

[11]	An experimental study on properties of concrete incorporating colloidal nanosilica and alccofine
	Innovative Infrastructure Solutions, 2022

[12]	Effect of elevated temperature on the calcined clay-limestone and marble stone blended cement concrete
	Australian Journal of Civil …, 2022

[13]	Effect of Molarity of Potassium Hydroxide Solution on Heat Resistance of Fly Ash-Slag Based Geopolymer
	… 2021: Proceedings of the …, 2022

[14]	Impact of Calcium Hydroxide, Reduced Activator Concentration, and Flash-Calcined Metakaolin on Alkali-Activated Metakaolin at Ambient and High Temperatures
	2022

[15]	On the determination of 36Cl and 129I in solid materials from nuclear decommissioning activities
	Babot, M Vasile, A Dobney, S Boden… - … of Radioanalytical and …, 2022

[16]	Microstructural and mechanical properties of fiber-reinforced seawater sea-sand concrete under elevated temperatures
	Journal of Building …, 2022

[17]	Effect of pre-carbonation on the properties of cement paste subjected to high temperatures
	Journal of Building …, 2022

[18]	Use of hydrated cement pastes (HCP) as a CO2 sponge
	Journal of CO2 …, 2022

[19]	The effects of calcium hydroxide and activator chemistry on alkali-activated metakaolin pastes exposed to high temperatures
	Cement and Concrete Research, 2022

[20]	Effects of accelerated carbonation and high temperatures exposure on the properties of EAFS and BOFS pressed blocks
	Journal of Building Engineering, 2022

[21]	Behavior of Biochar-Modified Cementitious Composites Exposed to High Temperatures
	Materials, 2021

[22]	Macro–meso–micro experimental studies of calcined clay limestone cement (LC3) paste subjected to elevated temperature
	2021

[23]	The role of flame retardants in cement mortars exposed at elevated temperatures
	2021

[24]	TG/DTG-DSC and high temperature in-situ XRD analysis of natural thaumasite
	2021

[25]	High temperature resistance of a phase change cementitious material at elevated temperatures
	2021

[26]	Evaluating Residual Compressive strength of Post-fire Concrete using Raman Spectroscopy
	2021

[27]	The influence of brick dust and crushed brick on the properties of lime-based mortars exposed at elevated temperatures
	2021

[28]	Evaluation of the Pozzolanic Activity of Uncontrolled-Combusted Sewage Sludge Ash
	2021

[29]	Experimental Analysis of Changes in Cement Mortar Containing Oil Palm Boiler Clinker Waste at Elevated Temperatures in Different Cooling Conditions
	2021

[30]	On the properties of new sustainable cementitious composites
	2021

[31]	Performance evaluation of cement paste incorporating ferro-nickel slag powder under elevated temperatures
	Case Studies in …, 2021

[32]	High temperature influence on concrete produced by spherical shaped EAF slag fine aggregate–Physical and mechanical properties
	2020

[33]	Physical-mechanical behaviour and transformations at high temperature in a cement mortar with waste glass as aggregate
	2020

[34]	Multianalytical approach of stay-in-place polyvinyl chloride formwork concrete exposed to high temperatures
	2020

[35]	Influence of Exposure to Elevated Temperatures on the Physical and Mechanical Properties of Cementitious Thermal Mortars
	2020

[36]	Influence of water re-curing on microstructure of heat-damaged cement mortar characterized by low-field NMR and MIP
	2020

[37]	Rehydration on high temperature-mortars based on recycled glass as aggregate
	2020

[38]	Influence of temperature on bond–slip characteristics of concrete containing fly ash
	2020

[39]	Performance of reinforced concrete beam column joint under high temperature
	2020

[40]	CSH gel structure and water molecules behaviors under different chemical environments in a range of temperatures
	2020

[41]	Thermal and mechanical properties of concrete and its constituents at elevated temperatures: A review
	2020

[42]	MICROSTRUCTURAL AND PHYSICAL ALTERATIONS OF REACTIVE POWDER CONCRETE AFTER HIGH TEMPERATURE EXPOSURE
	2019

[43]	Thermal Behaviour of Reinforced Concrete Beam with Static loading Condition.
	International Journal of Recent Technology and Engineering, 2019

[44]	Thermal Path Reconstruction for Reinforced Concrete Under Fire
	Fire Technology, 2019

[45]	Investigation of Delayed Ettringite Formation Damage Process Using Simultaneous Neutron and X-ray Tomography
	2019

[46]	Physicochemical and mechanical changes of thermally damaged cement pastes and concrete for re-curing conditions
	2019

[47]	Effect of pre-treatments of guadua fibres on mechanical behaviour of cement composite boards
	2019

[48]	Thermal behavior of reinforced concrete beam with static loading condition
	Int. J. Recent Technol. Eng, 2019

[49]	THERMOGRAVIMETRIC ANALYSIS OF CONCRETE
	International Journal of Modern Trends in Engineering and Research, 2018

[50]	Investigation of Waste Perlite and Recycled Concrete Powders as Supplementary Cementitious Materials


[51]	This is a post-refereed version of the paper For. Sci. Int. 325, 110874 Evaluating Residual Compressive strength of Post-fire Concrete using Raman 2 …

[1]	Sugarcane Bagasse-Derived Carbon for Partial Replacement of Cementitious Material in Concrete Materials Circular Economy, 2024 DOI:10.1007/s42824-023-00096-4

[2]	The Use of Recycled Polyethylene in Water-Oil Emulsion for Lightweight Concrete International Journal of Polymer Science, 2024 DOI:10.1155/2024/8872370

[3]	Understanding of Geochemical Reactions in Hydrogen-Injected Wells: Cement Integrity for Safe Underground Hydrogen Storage Day 3 Wed, February 14, 2024, 2024 DOI:10.2523/IPTC-23620-MS

[4]	Influence of polyvinyl alcohol coated porous Al2O3 ceramic waste particles on cement properties in geothermal applications Construction and Building Materials, 2023 DOI:10.1016/j.conbuildmat.2023.131046

[5]	Effect of elevated temperature on the calcined clay-limestone and marble stone blended cement concrete Australian Journal of Civil Engineering, 2023 DOI:10.1080/14488353.2022.2073048

[6]	Effects of ultrasound-assisted sulfuric acid treatment on the decontamination of Co nuclides in cement paste simulating radioactive concrete waste from dismantled nuclear power plants Construction and Building Materials, 2023 DOI:10.1016/j.conbuildmat.2023.130878

[7]	Reactivation of hydrated cement powder by thermal treatment for partial replacement of ordinary portland cement Materials and Structures, 2023 DOI:10.1617/s11527-023-02133-9

[8]	Influence of polyvinyl alcohol coated porous Al2O3 ceramic waste particles on cement properties in geothermal applications Construction and Building Materials, 2023 DOI:10.1016/j.conbuildmat.2023.131046

[9]	Properties of Concrete Subjected to Severe Accident Conditions at Fukushima Daiichi Nuclear Power Plant Journal of Advanced Concrete Technology, 2022 DOI:10.3151/jact.20.152

[10]	Effect of elevated temperature on the calcined clay-limestone and marble stone blended cement concrete Australian Journal of Civil Engineering, 2022 DOI:10.1080/14488353.2022.2073048

[11]	An experimental study on properties of concrete incorporating colloidal nanosilica and alccofine Innovative Infrastructure Solutions, 2022 DOI:10.1007/s41062-022-00800-4

[12]	On the determination of 36Cl and 129I in solid materials from nuclear decommissioning activities Journal of Radioanalytical and Nuclear Chemistry, 2022 DOI:10.1007/s10967-022-08327-9

[13]	Microstructural study of concrete performance after exposure to elevated temperatures via considering C–S–H nanostructure changes High Temperature Materials and Processes, 2022 DOI:10.1515/htmp-2022-0030

[14]	Microstructural study of concrete performance after exposure to elevated temperatures via considering C–S–H nanostructure changes High Temperature Materials and Processes, 2022 DOI:10.1515/htmp-2022-0030

[15]	Evaluating residual compressive strength of post-fire concrete using Raman Spectroscopy Forensic Science International, 2021 DOI:10.1016/j.forsciint.2021.110874

[16]	The influence of brick dust and crushed brick on the properties of lime-based mortars exposed at elevated temperatures Construction and Building Materials, 2021 DOI:10.1016/j.conbuildmat.2021.123743

[17]	The influence of brick dust and crushed brick on the properties of lime-based mortars exposed at elevated temperatures Construction and Building Materials, 2021 DOI:10.1016/j.conbuildmat.2021.123743

[18]	Evaluating residual compressive strength of post-fire concrete using Raman Spectroscopy Forensic Science International, 2021 DOI:10.1016/j.forsciint.2021.110874

[19]	Experimental Analysis of Changes in Cement Mortar Containing Oil Palm Boiler Clinker Waste at Elevated Temperatures in Different Cooling Conditions Crystals, 2021 DOI:10.3390/cryst11080988

[20]	Behavior of Biochar-Modified Cementitious Composites Exposed to High Temperatures Materials, 2021 DOI:10.3390/ma14185414

[21]	Influence of Exposure to Elevated Temperatures on the Physical and Mechanical Properties of Cementitious Thermal Mortars Applied Sciences, 2020 DOI:10.3390/app10062200

[22]	Influence of temperature on bond–slip characteristics of concrete containing fly ash Asian Journal of Civil Engineering, 2020 DOI:10.1007/s42107-020-00258-8

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Materials Science and Chemical Engineering

Journal of Materials Science and Chemical Engineering

Journals Menu

Home

About SCIRP

Service

Policies