[1]
|
Compound 48/80 increases murine bladder wall compliance independent of mast cells
Scientific Reports,
2023
DOI:10.1038/s41598-023-27897-6
|
|
|
[2]
|
Fracture analysis of A6063-T6 materials used as liner of composite overwrapped and type I pressure vessels under internal pressure
Advanced Composite Materials,
2023
DOI:10.1080/09243046.2022.2082012
|
|
|
[3]
|
Elastoplastic behavior and limit load analysis of thick-walled pressure vessel
THE 2ND INTERNATIONAL CONFERENCE ON DESIGN, ENERGY, MATERIALS AND MANUFACTURE 2021 (ICDEMM 2021),
2023
DOI:10.1063/5.0114241
|
|
|
[4]
|
Integral Hydro-Bulge Forming Method of Spherical Pressure Vessels Using a Triangle Patch Polyhedron
Journal of Pressure Vessel Technology,
2023
DOI:10.1115/1.4062120
|
|
|
[5]
|
Analysis of Dynamic Behavior of the Target and the Deuterium-Tritium Ice in Magnetic-Field Assisted Implosions
Fusion Science and Technology,
2023
DOI:10.1080/15361055.2023.2188968
|
|
|
[6]
|
A Bioinspired Fluid-Filled Soft Linear Actuator
Soft Robotics,
2023
DOI:10.1089/soro.2021.0091
|
|
|
[7]
|
A Study of Rupture Pressure for Membrane Type Pulse Separation Device of Dual Pulse Rocket Motor
Journal of the Korean Society of Propulsion Engineers,
2022
DOI:10.6108/KSPE.2022.26.1.098
|
|
|
[8]
|
Innovations in Mechanical Engineering
Lecture Notes in Mechanical Engineering,
2022
DOI:10.1007/978-981-16-7282-8_45
|
|
|
[9]
|
Fracture analysis of A6063-T6 materials used as liner of composite overwrapped and type I pressure vessels under internal pressure
Advanced Composite Materials,
2022
DOI:10.1080/09243046.2022.2082012
|
|
|
[10]
|
Root Cause Analysis of SuperHeat Exchanger Tubes of Bagasse-Fired Power Plant
Journal of Failure Analysis and Prevention,
2022
DOI:10.1007/s11668-022-01398-6
|
|
|
[11]
|
Mechanical characteristics of venous stents to overcome challenges of venous outflow obstruction
International Angiology,
2022
DOI:10.23736/S0392-9590.22.04773-3
|
|
|
[12]
|
Isobaric tanks system for carbon dioxide energy storage – The performance analysis
Journal of Energy Storage,
2022
DOI:10.1016/j.est.2022.104826
|
|
|
[13]
|
Commentary: Don't “stress” out. Dissection can be a thing of the past
The Journal of Thoracic and Cardiovascular Surgery,
2022
DOI:10.1016/j.jtcvs.2021.06.033
|
|
|
[14]
|
A Bioinspired Fluid-Filled Soft Linear Actuator
Soft Robotics,
2022
DOI:10.1089/soro.2021.0091
|
|
|
[15]
|
Temperature Induced Dimensional Tuning and Anomalous Deformation of Micro/Nanopores
Nano Letters,
2021
DOI:10.1021/acs.nanolett.0c04708
|
|
|
[16]
|
Failure analysis of primary waste heat boiler tube in ammonia plant
Heliyon,
2021
DOI:10.1016/j.heliyon.2021.e06151
|
|
|
[17]
|
Failure analysis of primary waste heat boiler tube in ammonia plant
Heliyon,
2021
DOI:10.1016/j.heliyon.2021.e06151
|
|
|
[18]
|
Wind-Tunnel Measurement of Differential Pressure on the Surface of a Dynamically Inflatable Wing Cell
Aerospace,
2021
DOI:10.3390/aerospace8020034
|
|
|
[19]
|
Impact Resistance of Fibre Reinforced Composite Railway Freight Tank Wagons
Journal of Composites Science,
2021
DOI:10.3390/jcs5060152
|
|
|
[20]
|
Temperature Induced Dimensional Tuning and Anomalous Deformation of Micro/Nanopores
Nano Letters,
2021
DOI:10.1021/acs.nanolett.0c04708
|
|
|
[21]
|
In-Vivo Measurement of Ocular Deformation in Response to Ambient Pressure Modulation
Frontiers in Bioengineering and Biotechnology,
2021
DOI:10.3389/fbioe.2021.759588
|
|
|
[22]
|
Burst strength analysis of composite overwrapped pressure vessel using finite element method
IOP Conference Series: Materials Science and Engineering,
2021
DOI:10.1088/1757-899X/1201/1/012029
|
|
|
[23]
|
Empirical rule for predicting mechanical properties of Ti-6Al-4V bone implants with radial-gradient porosity bionic structures
Materials Today Communications,
2021
DOI:10.1016/j.mtcomm.2021.102346
|
|
|
[24]
|
Influence of Armband Form Factors on Wearable ECG Monitoring Performance
IEEE Sensors Journal,
2021
DOI:10.1109/JSEN.2021.3059997
|
|
|
[25]
|
Failure analysis of primary waste heat boiler tube in ammonia plant
Heliyon,
2021
DOI:10.1016/j.heliyon.2021.e06151
|
|
|
[26]
|
Failure analysis of primary waste heat boiler tube in ammonia plant
Heliyon,
2021
DOI:10.1016/j.heliyon.2021.e06151
|
|
|
[27]
|
Empirical rule for predicting mechanical properties of Ti-6Al-4V bone implants with radial-gradient porosity bionic structures
Materials Today Communications,
2021
DOI:10.1016/j.mtcomm.2021.102346
|
|
|
[28]
|
Case Study: The Failure Analysis of Pipe ASTM A351 HK-40 in Reaction Plant Unit
Journal of Failure Analysis and Prevention,
2020
DOI:10.1007/s11668-020-00885-y
|
|
|
[29]
|
Corrosion pit-induced stress concentration in spherical pressure vessel
Thin-Walled Structures,
2019
DOI:10.1016/j.tws.2018.12.014
|
|
|
[30]
|
Structural behavior of joined hemispherical-cylindrical air-supported membrane structure under vertical loading deflation
Advances in Structural Engineering,
2019
DOI:10.1177/1369433219876204
|
|
|
[31]
|
Stress analysis due to internal explosion pressure of designed flameproof enclosure for hazardous area
Process Safety Progress,
2019
DOI:10.1002/prs.12100
|
|
|
[32]
|
Experimental and numerical investigations on failures due to plasticity in thin walled structures
IOP Conference Series: Materials Science and Engineering,
2018
DOI:10.1088/1757-899X/396/1/012065
|
|
|
[33]
|
Study of reliability index for high-density polyethylene based on pipe standard dimension ratio and fracture toughness limits
The International Journal of Advanced Manufacturing Technology,
2018
DOI:10.1007/s00170-017-1564-7
|
|
|
[34]
|
Numerical Investigation of J-Integral on a Notched Pressure Vessel
Advanced Materials Research,
2018
DOI:10.4028/www.scientific.net/AMR.1146.152
|
|
|
[35]
|
Failure investigation of super heater tubes of coal fired power plant
Case Studies in Engineering Failure Analysis,
2017
DOI:10.1016/j.csefa.2017.06.001
|
|
|
[36]
|
Structural Properties of EB-Welded AlSi10Mg Thin-Walled Pressure Vessels Produced by AM-SLM Technology
Journal of Materials Engineering and Performance,
2017
DOI:10.1007/s11665-017-2953-7
|
|
|
[37]
|
Assessment of models and methods for pressurized spherical composites
Mathematics and Mechanics of Solids,
2016
DOI:10.1177/1081286516673233
|
|
|
[38]
|
Experimental Field Tests and Finite Element Analyses for Rock Cracking Using the Expansion of Vermiculite Materials
Advances in Materials Science and Engineering,
2016
DOI:10.1155/2016/7531642
|
|
|
[39]
|
Development of Computational Models for Coiling Process with the Belt Wrapper
Metallurgical and Materials Transactions B,
2016
DOI:10.1007/s11663-016-0733-7
|
|
|
[40]
|
Development of Computational Models for Coiling Process with the Belt Wrapper
Metallurgical and Materials Transactions B,
2016
DOI:10.1007/s11663-016-0733-7
|
|
|
[41]
|
Investigation of Key Parameters of Rock Cracking Using the Expansion of Vermiculite Materia
Materials,
2015
DOI:10.3390/ma8105351
|
|
|