Experimental and Numerical Analysis of Forming Limit Diagram (FLD) and Forming Limit Stress Diagram (FLSD)

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org

Google-based Impact Factor: 0.97
Citations h5-index & Ranking*

Journals Menu

"Experimental and Numerical Analysis of Forming Limit Diagram (FLD) and Forming Limit Stress Diagram (FLSD)"
written by Mehdi Safari, Seyed Jamal Hosseinipour, Hamed Deilami Azodi,
published by Materials Sciences and Applications, Vol.2 No.5, 2011

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Theoretical and experimental study of FLDs of AA5083 sheet and investigation of advanced anisotropic yield criteria coefficients
	Journal of the Brazilian …, 2022

[2]	Prediction of Necking Points and Microstructure in Sheet Metal Forming
	Journal of Advanced …, 2021

[3]	Investigation on formability of three-layer joined Al/Cu/Al sheets annealed at different temperature
	2020

[4]	Technologies for Sustainable Development: Proceedings of the 7th Nirma University International Conference on Engineering (NUiCONE 2019), November …
	2020

[5]	Strain based and stress based fracture forming line for single point incremental forming
	2020

[6]	Failure modeling of interfaces and sheet metals
	Rheinisch-Westfälische Technische Hochschule …, 2020

[7]	Formability Evaluation Of En-10149-2steel Sheet Metalunder In-Plane Plane-Stretching Condition
	2018

[8]	MODÉLISATION NUMÉRIQUE DE LA FORMABILITÉ DES ALLIAGES D'ALUMINIUM AA5052 ET AA5083
	2018

[9]	Molecular dynamics simulations showing 1-palmitoyl-2-oleoyl-phosphatidylcholine (POPC) membrane mechanoporation damage under different strain paths
	Journal of Biomolecular Structure and Dynamics, 2018

[10]	Modeling of Forming Limit Bands for Strain-Based Failure-Analysis of Ultra-High-Strength Steels
	Metals, 2018

[11]	Prediction of Forming Limit Diagrams of AA5052-H36 at Different Temperatures
	2018

[12]	EXPERIMENTAL INVESTIGATION OF MAJOR AND MINOR STRAINS IN DIFFERENT REGIONS OF DEEP DRAWN CUPS
	International Journal of Mechanical and Production Engineering Research and Development, 2018

[13]	Experimental and numerical study of process limits for deep drawing of dome-structured sheet metals
	The International Journal of Advanced Manufacturing Technology, 2017

[14]	DETERMINATION OF FORMING LIMIT DIAGRAM OF DUPLEX STAINLESS STEEL SHEETS
	2016

[15]	Fracture prediction in the forming of aircraft Al stiffeners using multi-point dies
	The International Journal of Advanced Manufacturing Technology, 2016

[16]	Estudo dos parâmetros de conformabilidade para o processo de estampagem incremental
	2016

[17]	Forming limit diagram generation of aluminum alloy AA2014 using Nakazima test simulation tool
	2016

[18]	Determination Formability of Tubular (AL-alloy) by Hydraulic Bulge Test
	Engineering and Technology Journal, 2016

[19]	A Review Paper on FEA Application for Sheet Metal forming analysis
	International Journal of Scientific & Engineering Research, 2015

[20]	OSTENİTİK VE DUBLEKS PASLANMAZ ÇELİK SACLARIN ŞEKİL ALMA KABİLİYETLERİNİN KARŞILAŞTIRILMASI
	15th International Materials Symposium, 2014

[21]	Formability of AA1050 Sheet in High Velocity Forming
	2014

[22]	DETERMINATION OF FORMING LIMIT DIAGRAM FOR AISI 1008 STEEL SHEET BY THEORATICAL, EXPERIMENTAL AND FEA METHOD
	S GAMIT, KB PATEL, P PATEL - ijesr.in, 2013

[23]	Formability and springback characterization of TRIP800 advanced high strength steel
	Materials & Design, 2012

[24]	Identification of Process-Based Limit Stress States Applying a Stretch-Bending-Test
	Key Engineering Materials , 2012

[25]	DUBLEKS PASLANMAZ ÇELİK SACLARIN ŞEKİLLENDİRME SINIR DİYAGRAMLARININ DENEYSEL VE TEORİK OLARAK BELİRLENMESİ determınatıon of …


[26]	Investigation on forming limit diagram of 7075 aluminum alloy sheets under HFQ conditions

[1]	Prediction of Necking Points and Microstructure in Sheet Metal Forming Journal of Advanced Manufacturing Systems, 2022 DOI:10.1142/S021968672250024X

[2]	Investigation on formability of three-layer joined Al/Cu/Al sheets annealed at different temperature Materials Science and Technology, 2020 DOI:10.1080/02670836.2020.1792637

[3]	Investigation on formability of three-layer joined Al/Cu/Al sheets annealed at different temperature Materials Science and Technology, 2020 DOI:10.1080/02670836.2020.1792637

[4]	Molecular dynamics simulations showing 1-palmitoyl-2-oleoyl-phosphatidylcholine (POPC) membrane mechanoporation damage under different strain paths Journal of Biomolecular Structure and Dynamics, 2018 DOI:10.1080/07391102.2018.1453376

[5]	Modeling of Forming Limit Bands for Strain-Based Failure-Analysis of Ultra-High-Strength Steels Metals, 2018 DOI:10.3390/met8080631

[6]	Fracture prediction in the forming of aircraft Al stiffeners using multi-point dies The International Journal of Advanced Manufacturing Technology, 2017 DOI:10.1007/s00170-016-9634-9

[7]	Experimental and numerical study of process limits for deep drawing of dome-structured sheet metals The International Journal of Advanced Manufacturing Technology, 2017 DOI:10.1007/s00170-017-0450-7

[8]	Formability Analysis of AA6061 Sheet in T6 Condition Applied Mechanics and Materials, 2015 DOI:10.4028/www.scientific.net/AMM.766-767.416

[9]	Identification of Process-Based Limit Stress States Applying a Stretch-Bending-Test Key Engineering Materials, 2012 DOI:10.4028/www.scientific.net/KEM.504-506.47

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Materials Sciences and Applications

Materials Sciences and Applications

Journals Menu

Home

About SCIRP

Service

Policies