Materials Sciences and Applications

Materials Sciences and Applications

ISSN Print: 2153-117X
ISSN Online: 2153-1188
www.scirp.org/journal/msa
E-mail: msa@scirp.org
"Correlation between Chemical Glass Components and the Glass Sticking on Sputtered PtIr Physical Vapour Deposition Coatings for Precision Blank Moulding"
written by Kirsten Bobzin, Nazlim Bagcivan, Tobias Brögelmann, Tobias Münstermann,
published by Materials Sciences and Applications, Vol.5 No.5, 2014
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Review on thin film coatings for precision glass molding
Surfaces and Interfaces, 2022
[2] Influence of glass contact induced changes in surface composition of Pt, PtIr and Ir protective coatings on glass adhesion
2021
[3] Die galvanische Abscheidung von Iridium aus Hexabromoiridatkomplexen
2021
[4] Theoretical and experimental investigation of carbide-bonded graphene-assisted hot embossing of plano-convex glass microlens arrays
2020
[5] Quantum mechanically guided design of noble metal coatings for precision glass molding technology
2020
[6] 高精度微结构玻璃光学元件阵列模压技术研究进展
2020
[7] Kinetically Limited Phase Formation of Pt-Ir Based Compositionally Complex Thin Films
2020
[8] Verschleiß der Umformwerkzeuge beim Präzisionsblankpressen von Quarzglas
2020
[9] Front Matter: Volume 11171
2019
[10] PVD‐Schutzschichten für Werkzeuge des Präzisionsblankpressens: Eigenschaften einlagiger und nanostrukturierter Hartstoffschichten
2019
[11] PtIr protective coating system for precision glass molding tools: design, evaluation and mechanism of degradation
2019
[12] Precision Glass Molding of Fused Silica Optics
euspen’s 18 th International Conference & Exhibition, 2018
[13] Metastable phase formation of Pt-X (X= Ir, Au) thin films
Scientific Reports, 2018
[14] Atomic diffusion induced degradation in bimetallic layer coated cemented tungsten carbide
Corrosion Science, 2017
[15] Effect of Nb addition to Ti-bearing super martensitic stainless steel on control of austenite grain size and strengthening
2017
[16] Analysis of wear of fused silica moulding using glassy carbon moulds
Production Engineering, 2016
[17] Tribological wear analysis and numerical lifetime prediction of glassy carbon tools in fused silica molding
Wear, 2016
[18] Precision glass molding: cost efficient production of glass-optics with spectral range from 180nm ultraviolet to 13μm thermal infrared
Proceedings Volume 10009, Third European Seminar on Precision Optics Manufacturing, 2016
[19] Atomic diffusion induced degradation in bimetallic
2016
[20] Surfaces and Interfaces
[21] WERKSTOFFE UND WERKSTOFF-TECHNISCHE ANWENDUNGEN
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top