Modern Mechanical Engineering

Modern Mechanical Engineering

ISSN Print: 2164-0165
ISSN Online: 2164-0181
www.scirp.org/journal/mme
E-mail: mme@scirp.org
"Investigation of a Pressure Sensor with Temperature Compensation Using Two Concentric Wheatstone-Bridge Circuits"
written by Chi-Chang Hsieh, Chih-Ching Hung, Yan-Huei Li,
published by Modern Mechanical Engineering, Vol.3 No.2, 2013
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] High-accuracy differential resonant pressure sensor with linear fitting method
2021
[2] Modeling and Analysis of Temperature Compensation for Multi-temperature Zone Sintering Furnace Temperature Sensing
2021
[3] Sensor stability assurance problems and their relationship with the overall problems of providing system performance quality
2020
[4] Effect of Different Wheatstone Bridge Configurations on Sensitivity and Linearity of MEMS Piezoresistive Intracranial Pressure Sensors
2020
[5] High Temperature Analysis of Si, SOI & SiC Piezoresistive Pressure Sensors
International Journal of Engineering Research & Technology, 2019
[6] Study and Analysis of Junction Leakage Current in Si & SOI based Micro Piezoresistive Pressure Sensor
International Journal of Engineering Research & Technology, 2019
[7] Numerical optimization of thermally induced hysteresis effects in the packaging of MEMS pressure sensors
2019
[8] Fabrication and characterization of polysilicon-on-insulator (PolySOI) and a-SOI based micro piezoresistive pressure sensor for harsh environment applications
Microsystem Technologies, 2019
[9] Modeling and Analysis of Adaptive Temperature Compensation for Humidity Sensors
2019
[10] A Study of B-implanted n Type Si Epi Resistor for the Fabrication of Thermal Stable Pressure Sensor
2018
[11] Исследование влияния быстроменяющейся температуры на метрологические характеристики тензорезистивного сенсора давления
2018
[12] МИНИМИЗАЦИЯ МЕХАНИЧЕСКИХ НАПРЯЖЕНИЙ В ЧУВСТВИТЕЛЬНОМ ЭЛЕМЕНТЕ МИКРОДАТЧИКА ДАВЛЕНИЯ ПРИ КОРПУСИРОВАНИИ
2018
[13] Design of Silicon-on-Sapphire Pressure Sensor For High Temperature And High Pressure Applications
Current Trends in Computer Science and Mechanical Automation Vol. 2. Sciendo Migration, 2018
[14] Study of the influence of a fast-changing temperature on metrological characteristics of the tensoresistive pressure sensor
2018
[15] MINIMIZATION OF MECHANICAL STRESSES IN SENSITIVE ELEMENT OF MICRO-PRESSURE SENSOR UNDER PACKAGING
Journal of Instrument Engineering, 2018
[16] СПОСОБ МИНИМИЗАЦИИ МЕХАНИЧЕСКИХ НАПРЯЖЕНИЙ В ЧУВСТВИТЕЛЬНОМ ЭЛЕМЕНТЕ МИКРОМЕХАНИЧЕСКИХ УСТРОЙСТВ ПРИ …
2018
[17] Design, Simulation & Analysis of SOI based Micro Piezoresistive Pressure Sensor for High Temperature Applications
2018
[18] Efect of the membrane thermodeflection on the accuracy of a tensoresistive pressure sensor
2017
[19] Temperature characteristics research of SOI pressure sensor based on asymmetric base region transistor
2017
[20] Characteristics research of pressure sensor based on nanopolysilicon thin films resistors
International Journal of Modern Physics B, 2017
[21] M. Tykhan
2017
[22] Влияние термопрогиба мембраны на точность тензорезистивного датчика давления
2017
[23] Sensing sheet: the response of full-bridge strain sensors to thermal variations for detecting and characterizing cracks
Measurement Science and Technology, 2016
[24] Design and Experimental Research of a Temperature Compensation System for Silicon-on-Sapphire Pressure Sensors
2016
[25] Humidity sensor characteristics based on ZnO nanostructure grown by sol–gel method
International Journal of Nanotechnology, 2015
[26] A Review on Evolution, Current Trends and Future Scope of MEMS Piezoresistive Pressure Sensor
2015
[27] Humidity sensor characteristics based on ZnO nanostructure grown by sol-gel method
International Journal of Nanotechnology, 2015
[28] A Review on Evolution, Current Trends and Future Scope of MEMS Piezoresistive Pressure Sensors
International Journal of Engineering and Technical Research, 2015
[29] СПОСОБ МИНИМИЗАЦИИ МЕХАНИЧЕСКИХ НАПРЯЖЕНИЙ В ЧУВСТВИТЕЛЬНОМ ЭЛЕМЕНТЕ МИКРОМЕХАНИЧЕСКИХ УСТРОЙСТВ ПРИ МОНТАЖЕ В КОРПУС A METHOD OF MINIMIZING MECHANICAL STRESSES IN A SENSITIVE ELEMENT OF MICROMECHANICAL DEVICES AT PACKAGING
ДОКЛАДЫ КОНФЕРЕНЦИИ, 2014
Free SCIRP Newsletters
Copyright © 2006-2021 Scientific Research Publishing Inc. All Rights Reserved.
Top