Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"Tribological Behaviour of Aluminium/Alumina/Graphite Hybrid Metal Matrix Composite Using Taguchi’s Techniques"
written by N. Radhika, R. Subramanian, S. Venkat Prasat,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.5, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Application of the Full Factorial Design to Modelling of Dual Ceramic Particles (Al2O3/SiCp) Reinforced Aluminium Matrix Composites
Advances in Materials Science and Engineering
[2] EXPERIMENTAL INVESTIGATION ON TRIBOLOGICAL CHARACTERISTICS OF SILICON NITRIDE REINFORCED ALUMINIUM METAL MATRIX COMPOSITES
Journal of Engi neering Science and Technology
[3] Optimization of dry sliding wear parameters of AA336 aluminum alloy‐boron carbide and fly ash reinforced hybrid composites by stir casting process
2020
[4] Evaluation of microstructural and nanomechanical performance of spark plasma sintered TiFe-SiC reinforced aluminium matrix composites
2020
[5] Mechanical and chemical robustness of the aluminum oxide-infiltrated block copolymer films and the resulting aluminum oxide coatings
2020
[6] Mechanical and sliding wear performance of AA356-Al 2 O 3/SiC/graphite alloy composite materials: parametric and ranking optimization using Taguchi DOE and …
2020
[7] Wear Behavioral and Mechanical Studies on Liquid Forged VAL12 Alloy Strengthened by Lanthanum Oxide Dispersoids
2020
[8] Study of Parametric Influence on Dry Sliding Wear and Corrosion Behavior of AA5754-TiB2 In Situ Composites
2020
[9] Multi-objective optimisation of dry sliding wear control parameters for stir casted AA7075- TiO2 composites using Taguchi-Grey relational approach
2020
[10] Optimization of Powder Metallurgy Parameters for AA7072-MoO3 Composites through Taguchi Method
2020
[11] Effect Of Nano-Zirconia Addition On The Tribological Behavior Of Al-7075 Nano Composites
2020
[12] Effect of Controllable Parameters on the Tribological Behavior of Ceramic Particulate Reinforced Aluminium Metal Matrix Composites: A Review
2020
[13] Analysing the Mechanical Properties and Corrosion Phenomenon of Reinforced Metal Matrix Composite
2020
[14] AlB2 Borür Takviyeli Alüminyum Matrisli Kompozitlerin Abrasif Aşınma Özelliklerinin İncelenmesi Üzerine Deneysel Bir Çalışma
2020
[15] Synthesis and Characterization of Al 7075 Alloy Reinforced with Silicon Carbide and Fly Ash
2019
[16] Impact and wear resistance of Al-7072 MMCs reinforced with SiC and Al2 O3
2019
[17] AN EXPERIMENTAL STUDY ON EFFECT OF MECHANICAL PROPERTIES OF ALUMINUM COMPOSITE REINFORCED WITH SIC ALUMINA AND FLY ASH
2019
[18] Effect of Reinforced Nano-Composites on AMC Solidification Curve
2019
[19] Characteristics of A6061/(Glass Fibre+ AL2O3+ SiC+ B4C) Reinforced Hybrid Composite Prepared through STIR Casting
2019
[20] Characterization of Wear Properties of Epoxy-SiC-Alumina Filled Polymer Matrix Composites
International Journal of Scientific Research in Science and Technology, 2019
[21] Evaluation of Mechanical and Wear Properties of Aluminium/Al2O3 Composite Material for Brake Rotor
2019
[22] Parametric studies on dry sliding wear behaviour of Al-7075 alloy matrix composite using S/N ratio and ANOVA analysis
2019
[23] Effect of Heat Treatment on Wear behavior of Hybrid Aluminum Metal Matrix Composites.
2019
[24] Surface mechanical and self-lubricating properties of MWCNT impregnated aluminium surfaces
2019
[25] Investigation of Properties of Mg and Al Based Nano Hybrid-Metallic Composites Processed Through Liquid Processing Technique
2019
[26] Nanoparticles Reinforcement Effect on the MMC's Characteristics
2019
[27] Characterization of Al–Si12Fe/silicon nitride composites based on microstructure and influence of weight fraction of silicon nitride particles on the mechanical and …
2019
[28] Numerical Modelling of Nanocomposites Using GA and FD Techniques
2019
[29] Wear testing of in situ cast AA8011-TiB2 metal matrix composites
2019
[30] An Experimental Investigation of Drilling Al/Sic/Mica Hybrid Composites
2019
[31] Experimental study on the mechanical properties of heat treated aluminium composites
2019
[32] Mechanical and wear behaviour of 6351 Al/Gr/SiC composites fabricated by squeeze casting
2019
[33] Dry sliding wear characteristics of aluminium metal matrix composites: a brief overview
2019
[34] Material characterization of SiC and Al2O3–reinforced hybrid aluminum metal matrix composites on wear behavior
2019
[35] A REVIEW ON BRAKE LINING MATERIALS
International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 2019
[36] Experimental Investigation of Mechanical and Tribological Properties of Al 7075—MoS2/ZrO2/Ni Hybrid Composite
Advances in Materials and Metallurgy, 2019
[37] EFFECT OF ADDITION OF SIC AND AL2O3 ON WEAR BEHAVIOR OF HYBRID ALUMINUM METAL MATRIX COMPOSITES.
2019
[38] Study on Wear Behavior of Al-Based Hybrid Metal Matrix Composites Reinforced with Al2O3/SiC Particles
2019
[39] EFFECT OF ADDITION OF SIC AND AL^ sub 2^ O^ sub 3^ ON WEAR BEHAVIOR OF HYBRID ALUMINUM METAL MATRIX COMPOSITES
2019
[40] Study and comparison of A356-WC composite and A356 alloy for an off-road vehicle chassis
2018
[41] Sliding Wear Properties of a Composite of Aluminum 2024 Powder Reinforced with Heat Treatment and Silicon Carbide
2018
[42] A Review on Wear Analysis of Aluminium Based Metal Matrix Composites
International Journal of Applied Engineering Research, 2018
[43] Optimization of wear parameters and their relative effects on stir cast AA6063-Si3N4 Composite
Materials Research Express, 2018
[44] A model to predict and optimise machine guarding operator's compliance activities in a bottling process plant: A developing country experience
International Journal of Occupational Safety and Ergonomics, 2018
[45] Mechanical and Wear Behavior of Aluminium-Zircon Sand-Flyash Metal Matrix Composite
IOP Conference Series: Materials Science and Engineering, 2018
[46] TRIBOLOGICAL INVESTIGATION OF Al7075/TIC/MOS2 HYBRID COMPOSITE MATERIAL
International Research Journal of Engineering and Technology, 2018
[47] Cumulative influence of nanoparticles on MMCs' time–temperature history curve
2018
[48] Studies on Mechanical Behaviour of Aluminium-Silicon Carbide-Copper Metal Matrix Composite
The 2nd International Conference on Mechanical, Aeronautical and Automotive Engineering (ICMAA 2018), 2018
[49] Optimization of friction and wear behaviour of Al7075-Al2O3-B4C metal matrix composites using Taguchi method
IOP Conference Series: Materials Science and Engineering, 2018
[50] MECHANICAL AND TRIBOLOGICAL BEHAVIOUR OF STIR CAST ALUMINIUM/BORON CARBIDE/FLY ASH COMPOSITES
2018
[51] An investigation on the tribological characteristics of Al 7075 based single and hybrid nanocomposites
Materials Today: Proceedings, 2018
[52] Synthesis of Al LM25/TiC Composite Using Squeeze Casting Method and Investigation of its Mechanical and Adhesive Wear properties
Materials Today: Proceedings, 2018
[53] Effect of amount of boron carbide on wear loss of Al-6061 matrix composite by Taguchi technique and Response surface analysis
IOP Conference Series: Materials Science and Engineering, 2018
[54] Influence Of Mechanical &Tribological BehaviourOf Al 2024 MMC Fabricated By Stir Casting Technique-A Review
Materials Today: Proceedings, 2018
[55] Wear Characteristics Comparison of Cast and Powder Metallurgy Based Al and Al-Si Alloy [LM6]
Materials Today: Proceedings, 2018
[56] A Study of Tribological Behaviour of Aluminum-7075/SiC Metal Matrix Composite
Materials Today: Proceedings, 2018
[57] Influence of abrasive water jet machining parameter on performance characteristics of AA7075-ZrSiO4-hBN hybrid metal matrix composites
Materials Research Express, 2018
[58] Effect of High Temperature on Wear Behavior of Stir Cast Aluminium/Boron Carbide Composites
2018
[59] Effect of amount of boron carbide on wear loss of Al-6061 matrix composite by Taguchi technique and Response surface analysis.
2018
[60] MECHANICAL AND TRIBOLOGICAL ENHANCEMENT OF AA6063 ALUMINUM ALLOY USING SOLID SPHERE FLY ASH PARTICLES REINFORCEMENT
2018
[61] Graphene-Based Lubrication for Tribological Applications: Nanolubricants and Self-lubricating Nanocomposites
2018
[62] Fabrication of Aluminium based Metal Matrix Composite using Silicon Carbide Reinforcement and Evaluation of Mechanical Properties
2017
[63] Wear and Friction Study of Ferroelectric Composite Nanomaterial on Pin on Disc Machine
IOSR Journal of Applied Physics, 2017
[64] Research on wear Behavior of LM-25 hybrid Metal Matrix Composite
International journal for science and advance research in technology, 2017
[65] Study of Wear Behavior of Aluminum based MMCs using Taguchi Methods
International Journal of Research and Scientific Innovation (IJRSI), 2017
[66] Hardox 400 çelik yüzeyinin plazma transferli ark kaynak yöntemiyle alaşımlandırılması ve taguchi metoduyla değerlendirilmesi/The evaluation with taguchi …
2017
[67] Synthesis and characterization of zirconium dioxide particulate reinforced aluminium alloy metal matrix composite
2017
[68] Investigation of Mechanical Properties and Dry Sliding Wear Behaviour of Graphite Reinforced Al7068 Alloy
Applied Mechanics and Materials, 2017
[69] OPTIMIZATION OF CUTTING PARAMETERS OF AL-ZRO2-SICP AND GRAPHITE HYBRID METAL MATRIX COMPOSITES
JPE, 2017
[70] Fabrication and Analysis of Aluminium with Graphite Reinforcement Based Metal Matrix Composites
2017
[71] The Dry Sliding Wear Behaviour of Aluminum Composites: A Review
2017
[72] Dry Sliding Wear Behavior of the Reinforced by Graphite Particle and Heat Treated of Recycled Aluminum AA6061 Based MMC Fabricated by Powder Metallurgy …
Key Engineering Materials, 2017
[73] Dry sliding wear and friction characteristics of AA6061 - TiB2/ZrB2 in-situ metal matrix composites at room temperature
International Journal of Surface Science and Engineering, 2017
[74] Microstructure and Dry Sliding Wear Behaviour of Al2219-TiC Composites
Materials Today: Proceedings, 2017
[75] Dry sliding wear behavior of Al/Gr/SiC hybrid metal matrix composites by Taguchi techniques
Materials Today: Proceedings, 2017
[76] Tribological Performance of Al-MMC Reinforced with Treated Fly Ash using Response Surface Methodology
2017
[77] Optimization ofWear Performance of Castor Oil based Lubricant using Taguchi Technique
Materials Today: Proceedings, 2017
[78] PARAMETRIC STUDY ON MECHANICAL & TRIBOLOGICAL PROPERTIES OF ALUMINIUM METAL MATRIX COMPOSITES
2017
[79] Wear behavior of Al-7% Si-0.3% Mg/melon shell ash particulate composites
2017
[80] Genetic Algorithm based Finite Difference Simulation of Solidification Process for MMC's
2017
[81] Fabrication and Experimental Investigation on Mechanical Properties of Aluminium Metal Matrix Composite by using Stir Casting
2017
[82] An Experimental Investigation of Metal Matrix Composites of Aluminium (Lm6), Boroncarbide and Flyash
Australian Journal of Basic and Applied Sciences, 2016
[83] Influences of graphite reinforcement on the tribological properties of self-lubricating aluminum matrix composites for green tribology, sustainability, and energy …
The International Journal of Advanced Manufacturing Technology, 2016
[84] Investigation of Tribological Properties and Optimal Coating Material Selection for AISI 4140 Using TOPSIS and Taguchi Method
IJMEIT, 2016
[85] OPTIMIZATION TECHNIQUE TO STUDY DRY SLIDING WEAR BEHAVIOR OF ALUMINIUM ALLOY 2218 BASED SELF LUBRICATING COMPOSITE MATERIALS
2016
[86] Dry/wet sliding activation wear of pure Al
2016
[87] An Experimental Study of Mechanical Behavior of Aluminium Matrix Composite by Experimental Approach
International Journal of Current Trends in Engineering & Research, 2016
[88] Asian Research Consortium
2016
[89] Effect of graphite particles on improving tribological properties Al-16Si-5Ni-5Graphite self-lubricating composite under fully flooded and starved lubrication conditions for transportation applications
The International Journal of Advanced Manufacturing Technology, 2016
[90] EVALUATION OF MECHANICAL PROPERTIES OF 6061 ALUMINIUM BASED MMC REINFORCED WITH SiC & GRAPHITE
International Journal of Innovative Research in Science and Engineering, 2016
[91] Study of tribological properties on Al/Al 2 O 3/MoS 2 hybrid composite processed by powder metallurgy
Alexandria Engineering Journal, 2016
[92] Effect of Heat Treatment on the Wear Behaviour of Functionally Graded LM13/B 4 C Composite.
Tribology in Industry, 2016
[93] The experimental optimization of abrasive wear resistance model for an in-situ AlB2/Al-4Cu metal matrix composite
Industrial Lubrication and Tribology, 2016
[94] Processing methods and property evaluation of Al 2 O 3 and SiC reinforced metal matrix composites based on aluminium 2xxx alloys
2016
[95] A Review on Properties of Aluminium Based Metal Matrix Composites via Stir Casting
International Journal of Scientific & Engineering Research, 2016
[96] Optimization of Wear Behavior of Magnesium Alloy AZ91 Hybrid Composites Using Taguchi Experimental Design
Metallurgical and Materials Transactions A, 2016
[97] Parametric Analysis of Different Grades of Steel Materials Used in Plastic Industries through Die Sinking EDM Process
International Journal of Materials Forming and Machining Processes (IJMFMP), 2016
[98] Microstructure and Hardness Studies of Magnesium-Aluminum Alloy and Fused Silica Particulate Composite
International Journal for Ignited Minds, 2016
[99] Machining Studies on Hybrid AMCs used for Automotive Applications
2016
[100] Study of Dispersoid Content and Chill Effect for Improved Mechanical Properties of Aluminum Alloy Composite
International Journal for Ignited Minds, 2016
[101] Post-processing treatments for improving the wear resistance of FSPed Al-matrix composite
2016
[102] Machining of Aluminum Hybrid Metal Matrix Composite by Wire Electrical Discharge Machine: A Review
IUP Journal of Mechanical Engineering, 2016
[103] Application of Grey-Taguchi Technique for Optimization of Process Parameters for Wear Behavior on AA7075-TiC Metal Matrix Composites
2016
[104] Studies on Adhesive Wear Characteristics of Heat Treated Aluminium LM25/AlB 2 Composites.
Tribology in Industry, 2016
[105] Analysis of Wear Rate and Tribological Behavior of Aluminum Cast Alloy A356 and Granite Composite at Different Speeds
International Journal of Engineering and Advanced Technology, 2016
[106] Effect of granite particulate on Tensile Properties & Hardness of Aluminium 6061 based Metal Matrix Composite
International Journal of Advances in Scientific Research and Engineering, 2016
[107] Application of the full factorial design to modelling of Al2O3/SiC particle reinforced al-matrix composites
2016
[108] Experimental Investigation on Tribological Behavior and Grey Relational Optimization of an Eco-friendly Automobile Brake Rotor Materials
2016
[109] Investigation of mechanical and wear properties of LM24/silicate/fly ash hybrid composite using vortex technique
Advances in Materials Science and Engineering, 2016
[110] Wear Investigation of Al-SiCp–Fly Ash Composites
2016
[111] Analysis of Enhanced Mechanical Properties of Al-MMCs Reinforced with SiC by using Stir Casting Method
International Journal of Technical Research (IJTR), 2016
[112] A Review on Optimization of Friction and Wear Parameters (Al Alloy-B4C) Composite Using Taguchi Technique
2015
[113] Synthesis of Metal Matrix Hybrid Composites and Evaluation of Mechanical and Tribological Properties
2015
[114] Synthesis of Metal Matrix Hybrid Composites and Evaluation of Mechanical and Tribological properties.
Applied Mechanics & Materials, 2015
[115] Investigation of Microstructure and Tribological Properties of Al/Al2O3+ Gr Hybrid Composite
2015
[116] Dry Sliding Tribological Characterization and Parameters Optimization of Aluminium Hybrid Metal Matrix Composite for Automobile Brake Rotor Applications
International Journal of Applied Engineering Researc, 2015
[117] Experimental Investigation on Abrasive Wear Behavior of Functionally Graded Aluminum Composite
Journal of Tribology, 2015
[118] Study of Tribological Behaviour of Al6061/Silicon Carbide/Graphite Hybrid Metal Matrix Composite Using Taguchi's Techniques
Signal, 2015
[119] Evaluation of Dry Sliding Wear Characteristics of LM 13 Al/B 4 C Composites.
Tribology in Industry, 2015
[120] A Study on Dry Sliding Wear Behaviour of Hybrid Metal Matrix Composites at Room Temperature
Applied Mechanics and Materials, 2015
[121] Study of Dispersoid Content and Chill Effect for Improved Mechanical Properties of Aluminum-Garnet-Carbon Hybrid Metal Matrix Composites
2015
[122] Optimization of Mechanical Properties and Wear Parameters of Al alloy-B4C Composite Using Taguchi Technique: A Review
2015
[123] Evaluation of the Taguchi Method for Wear Behavior of Al6061/Cu-SiC/Cu-Gr Hybrid Composite
Materials Today: Proceedings, 2015
[124] Influences of graphite reinforcement on the tribological properties of self-lubricating aluminum matrix composites for green tribology, sustainability, and energy efficiency—a review
The International Journal of Advanced Manufacturing Technology, 2015
[125] Overview of wear performance of aluminium matrix composites reinforced with ceramic materials under the influence of controllable variables
Ceramics International, 2015
[126] Characterization of As Cast and Heat Treated Aluminium Based Hybrid Metal Matrix Composites
International Journal of Scientific & Engineering Research, 2015
[127] A Review on Optimization of Friction and Wear Parameters (Al alloy-B 4 C) Composite Using Taguchi Technique.
Applied Mechanics & Materials, 2015
[128] CERCETĂRI PRIVIND CARACTERISTICILE TRIBOLOGICE ALE COMPOZITELOR Al-SiC-Grafit
2015
[129] Development and characterization of aluminium based metal matrix composites using fly ash and glass fiber by back pressure equal channel angular …
2014
[130] Fabrication and Sliding Wear Behaviour of Metal Matrix Composites
Applied Mechanics and Materials, 2014
[131] Optimization of Tribological properties of Al-6082/SiC Metal Matrix Composite by Grey-Taguchi's Method
2014
[132] Prediction of Wear Behaviour of Almg1sicu Hybrid MMC Using Taguchi with Grey Rational Analysis
Procedia Engineering, 2014
[133] Experimental investigation on mechanical behaviour, modelling and optimization of wear parameters of B4C and graphite reinforced aluminium hybrid composites
Materials & Design, 2014
[134] Tribological and mechanical behavior of particulate aluminum matrix composites
Journal of Reinforced Plastics and Composites, 2014
[135] Characteristics of Aluminum Hybrid Composites
International Journal of Chemical, Nuclear, Materials and Metallurgical Engineering, 2014
[136] Analysis of Tribological Behavior of Aluminium/B4 C Composite Under Dry Sliding Motion
Procedia Engineering, 2014
[137] Optimization of A356/10SiC/3Gr Hybrid Composite Wear Using Taguchi Method
2014
[138] Tribology in Industry
2014
[139] OPTIMIZATION OF ELECTRICAL DISCHARGE MACHINING PARAMETERS OF ALUMINIUM HYBRID COMPOSITES USING TAGUCHI METHOD
Journal of Engineering Science and Technology, 2014
[140] Application of Taguchi Technique to Optimize Tribological Behaviour of Al6061T6/SiC/Al2O3 Metal Matrix Composite
V Kumar, AK Mishra, BK Roy - ijsrp.org, 2014
[141] OPTIMIZATION OF WEAR AT Al/SiC/Gr HYBRID COMPOSITES USING TAGUCHI METHOD
B STOJANOVI?, L IVANOVI? - downloads.hindawi.com, 2014
[142] Wear Characterization of Aluminium/Sic/Al2O3 Hybrid Metal Matrix Composite Using Taguchi Technique
International Journal of Innovative Research and Development, 2014
[143] Studies on mechanical and tribological behaviour of particulate Aluminium metal matrix composites
2014
[144] A Review on Sliding Wear Behaviour of Aluminium Matrix Composites with Hybrid Reinforcements for Automotive Applications
Tribology Online, 2014
[145] Experimental Investigation of Tribological Behaviour on AA6061/SiC/Al2O3/Gr Metal Matrix Composite with Application of Taguchi Technique
International Journal of Engineering and Management Research, 2014
[146] Tribological characterization and parameters optimization of Al6061 hybrid metal matrix composites
2014
[147] Optimization of Tribological Performance of Al-6061T6-15% SiCp-15% Al2O3 Hybrid Metal Matrix Composites Using Taguchi Method & Grey Relational …
2014
[148] Estimation of Tribological Behavior of Al2024-TiB2 In Situ Composite Using GMDH and ANN
Applied Mechanics and Materials, 2014
[149] An Extended Study for Analyzing the Composite Material (SiC)
International Journal in Multidisciplinary and Academic Research, 2014
[150] Estimation of tribological behavior of Al2024-TiB2 in-situ composite using GMDH and ANN
2014
[151] Wear optimization of Al/Sic/Gr hybrid MMC using Taguchi and ANOVA
2014
[152] Frictional and wear characteristics of stir-cast hybrid composite aluminium Al6061reinforced with SiC particulates
2013
[153] EVALUATION & COMPARISION OF MECHANICAL PROPERTIES OF ALUMINIUM ALLOY 5052 REINFORCED WITH SILICONCARBIDE, GRAPHITE AND FLY ASH HYBRID METAL MATRIX COMPOSITES
International Journal of Engineering Science and Technology, 2013
[154] Investigation of the effect of aging variables on the impact behaviour of Al 6061 alloy and its composites
Research & Technology in the Coming Decades (CRT 2013), National Conference on Challenges in, 2013
[155] Tribology of Metal Matrix Composites
Tribology for Scientists and Engineers. Springer New York, 2013
[156] Development of an AMMC through Identification of Influential Factors Combination Using Grey-Fuzzy Approach
Development, 2013
[157] Polystyrene grafted carbon black synthesis via in situ solution radical polymerization in ionic liquid
Journal of Polymer Research, 2013
[158] On modeling the abrasive wear characteristics of in situ Al–12% Si/TiC composites
Materials & Design, 2013
[159] Study of Dry Sliding Wear Behavior of Aluminium/SiC/Al2O3/Graphite Hybrid Metal Matrix Composite Using Taguchi Technique
International Journal of Scientific and Research Publications, 2013
[160] A Statistical Analysis of Optimization of Wear Behaviour of Al-Al2O3 Composites Using Taguchi Technique
Procedia Engineering, 2013
[161] A study of sliding wear behaviors of Al-7075 alloy and Al-7075 hybrid composite by response surface methodology analysis
Materials & Design, 2013
[162] Tribological Behavior of Novel Hybrid Composite Materials Using Taguchi Technique
Journal of Tribology, 2013
[163] Development of aluminium metal matrix composite through selection of influential factors by using fuzzy logic
2012
[164] Optimization on friction and wear process parameters using Taguchi technique
Int. J. Eng. Technol, 2012
[165] Tribological behaviour of Al-6061/SiC metal matrix composite by Taguchi's techniques
International Journal of Scientific and Research Publications, 2012
[166] Optimization of Friction and Wear Behaviour in Hybrid Metal Matrix Composites Using Taguchi Technique
Journal of Minerals and Materials Characterization and Engineering, 2012
[167] Entangled dilaton dyons
2012
Free SCIRP Newsletters
Copyright © 2006-2021 Scientific Research Publishing Inc. All Rights Reserved.
Top