Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"Characterizing and Modeling Mechanical Properties of Nanocomposites-Review and Evaluation"
written by Hurang Hu, Landon Onyebueke, Ayo Abatan,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.4, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] A review on “Elastic properties of porous polycrystalline thoria–A relook”
[2] Effect of adding carbon nanotubes into the matrix material on the buckling behavior of glass/epoxy composite plates: An experimental study
2021
[3] Mechanical models and numerical simulations in nanomechanics: A review across the scales
2021
[4] State of Research on Fiber Reinforced Nanocomposites and Theses of This Book
2021
[5] Cohesive Zone Modeling of the Elastoplastic and Failure Behavior of Polymer Nanoclay Composites
2021
[6] Effect of Particle Size on the Mechanical Properties of TiO2–Epoxy Nanocomposites
2021
[7] PRODUCTION AND CHARACTERIZATION OF ALUMINA NANOPARTICLES FROM GIRO CLAY VIA ACID LEACHING WITH SOL GEL METHOD
2021
[8] Thermoplastic bio-nanocomposites: From measurement of fundamental properties to practical application
2021
[9] Critical Issues in XLPE-Based Polymer Nanocomposites and Their Blends
2021
[10] Mathematical and finite element analysis estimations of the reinforcement effect on Young's modulus of polymer membrane/montmorillonite clay nanocomposites
2021
[11] Polymeric Coatings for AR-Glass Fibers in Cement-Based Matrices: Effect of Nanoclay on the Fiber-Matrix Interaction
2021
[12] Atomic force microscopy-based nanoscopic studies of epoxy/boehmite nanocomposites
2020
[13] Metal Oxide–Based Nanocomposites as Antimicrobial and Biomedical Agents
2020
[14] 2. Effect of mold design on the fiber orientation in the case of injection molding: experiment and simulation
2020
[15] Наноструктурный композиционный материал, модифицированный графеноподобными частицами
2020
[16] Polymer Conformations, Entanglements and Dynamics in Ionic Nanocomposites: A Molecular Dynamics Study
2020
[17] Dispersão de grafeno e óxido de grafeno em matrizes poliméricas
2020
[18] Απομάκρυνση μείγματος οργανικών ρύπων από υδατικά δείγματα με τη χρήση μαγνητικών διμεταλλικών υλικών σιδήρου-χαλκού
2020
[19] Non-stationary Response of a Carbon Nanotube-reinforced Composite Conical Shell
2020
[20] Carbon Materials From Various Sources for Composite Materials
2020
[21] Characterization of carbon based nanofibers in nanocomposites and their applications
2020
[22] 2 Effect of mold design on the fiber orientation in the case of injection molding: experiment and simulation
2020
[23] Experimental and theoretical investigation on flexure performance of pultruded GFRP composite beams with damage analyses
2020
[24] Synthesis of hybrid bionanocomposites and their application for the removal of rare-earth elements from synthetic wastewater
2020
[25] Buckling and free vibration analyses of pultruded GFRP laminated composites: Experimental, numerical and analytical investigations
2020
[26] Effect of Adding Carbon Nanotubes into the Matrix Material on the Aero-Thermo-Elastic Stability Region of Fibrous Laminates
2020
[27] Mechanical Properties of Nanocomposite Materials: A Review
2020
[28] An Analysis of Mechanical and Viscoelastic Behaviour of Nano-SiO 2 Dispersed Epoxy Composites
2019
[29] aSchool of Civil and Mechanical Engineering, Curtin University, Perth, WA, Australia
2019
[30] Self-sustained vibrations of functionally graded carbon nanotubes-reinforced composite cylindrical shells in supersonic flow
2019
[31] Elaboration et caractérisation d'un nanobiocomposite à base de PLA et de silice pyrogénée
2019
[32] Desenvolvimento de filmes biodegradáveis e nanofibras a partir de resíduos de cápsulas gelatinosas
2019
[33] Magneto-Active Polymers: Fabrication, characterisation, modelling and simulation at the micro-and macro-scale
2019
[34] Toxicological Evaluations of Nanocomposites with Special Reference to Cancer Therapy
2019
[35] Spatial distribution of nanodiamond and its effect on mechanical behaviour of epoxy based composite using 2D modulus mapping
2019
[36] Predicting the Mechanical Properties of Nanocomposites Reinforced with 1-D, 2-D and 3-D Nanomaterials
2019
[37] A new method to generate artificial microstructure of dual phase steel using Teacher-Learner Based Optimization
2019
[38] Decoupling subsurface inhomogeneities: a 3D finite element approach for contact nanomechanical measurements
2019
[39] Reversible Self-Healing for Preserving Optical Transparency and Repairing Mechanical Damage in Composites
2019
[40] Effect of interphase, curvature and agglomeration of SWCNTs on mechanical properties of polymer-based nanocomposites: Experimental and numerical …
2019
[41] A comprehensive review on analysis of nanocomposites: from manufacturing to properties characterization
2019
[42] Small-scale effect on the forced vibration of a nano beam embedded an elastic medium using nonlocal elasticity theory
2019
[43] Investigations of ZnO-NiO/PSi heterojunction for solar cell application
2019
[44] Improvement in mechanical and structural properties of poly (ethylene terephthalate) nanohybrid
2019
[45] Thermomechanical characterization of Nano-Fe3O4 reinforced thermoplastic adhesives and single lap-joints
2019
[46] Influence of Some Nano-Inorganic Oxides on the Mechanical Properties of Epoxy Based Nano Composites
2019
[47] Evaluation of Elastic Properties for a Nanocomposite (Reinforced with SWCNT Agglomerates) Utilizing a Representative Volume Element
2019
[48] Synthesis of hybrid bio-nanocomposites and their application for the removal of rare earth elements from synthetic wastewater
2019
[49] An Analysis of Mechanical and Viscoelastic Behaviour of Nano-SiO2 Dispersed Epoxy Composites
2019
[50] Avaliação do desempenho de pastas de cimento portland reforçadas com nanobastões de carbeto de silicio após tratamento térmico
2019
[51] 4. Natural fiber-based biocomposites: Effect of orientation on mechanical properties
2019
[52] Magneto-Active Polymers
2019
[53] Prediction of the cyclic durability of woven-hybrid composites
Durability and Life Prediction in Biocomposites, Fibre-Reinforced Composites and Hybrid Composites, 2019
[54] Insights into nano-scale physical and mechanical properties of epoxy/boehmite nanocomposite using different AFM modes
2019
[55] Impact of Nanoparticle Shape, Size, and Properties of Silver Nanocomposites and Their Applications
2019
[56] Deformation of Hexagonal Boron nitride
2018
[57] Modelling and experimental characterization of nanoindentation responses of various biocomposite materials
2018
[58] Synthesis of Ag-ZnO by Seed Mediated Hydrothermal Method and its Characterization.
2018
[59] Miscibility and Nanoparticle Diffusion in Ionic Nanocomposites.
2018
[60] Yeni nesil grafen/PProDOT–X (X= 0, Et2 ve Me2) nanokompozit üretimi ve karşıt elektrot olarak boya-duyarlı güneş hücrelerindeki uygulamaları
2018
[61] Nanostructured aluminum matrix composite materials, modified by carbon nanostructures
2018
[62] Strategies for the preparation of polymer composites with complex alignment of the dispersed phase
2018
[63] Efek Komposisi terhadap Sifat Fisis dan Mikrostruktur Serbuk Nanokomposit BaFe12O19/Ni0. 5Zn0. 5Fe2O4
2018
[64] TiN and TiCN Coated Stainless Steel 316 Ultrosonic Cavitation Probe for High Temperature Application
Silicon, 2018
[65] FEM study on mechanical properties of nanocomposites reinforced by defective graphene sheets
Polymer Composites, 2018
[66] Mathematical Modeling of the Coupled Processes in Nanoporous Bodies
Acta Mechanica et Automatica, 2018
[67] Fabrication of Nanostructures with Bottom-up Approach and Their Utility in Diagnostics, Therapeutics, and Others
Environmental, Chemical and Medical Sensors, 2018
[68] Buckling of shear deformable polymer/clay nanocomposite columns with uncertain material properties by multiscale modeling
Composites Part B: Engineering, 2018
[69] Evaluation of mechanical properties of newer nanoposterior restorative resin composites: An In vitro study
2018
[70] Impact of the incorporation of solid lipid nanoparticles on β-lactoglobulin gel matrices
Food Hydrocolloids, 2018
[71] Indentation Methods for the Characterization of Carbon-Based Polymer Nanocomposites
Carbon-Based Polymer Nanocomposites for Environmental and Energy Applications, 2018
[72] Effect of blending conditions on nano-clay bitumen nanocomposite properties
Road Materials and Pavement Design, 2018
[73] Semi-automated quantification of the microstructure of PLA/clay nanocomposites to improve the prediction of the elastic modulus
Polymer Testing, 2018
[74] Manufacturing, Multiscale Analysis on Mechanical Properties and Microstructural Characterisation of Graphene Nanoplatelet Reinforced PPS and PA6 …
2018
[75] Characterization of micromechanical properties of coals of different types by nanoindentation
2018
[76] Miscibility and Nanoparticle Diffusion in Ionic Nanocomposites
Polymers, 2018
[77] Υβριδικά συστήματα πολυμερικής μήτρας με μικρο-και νανο-πληρωτές άνθρακα
2018
[78] Geomechanics and Geodynamics of Rock Masses-Volume 2: Proceedings of the 2018 European Rock Mechanics Symposium
2018
[79] Self-Activated Morphing Carbon Fiber Composites via Cyclic Internal Stresses
2018
[80] Model of the stress-strain state prediction of a building during the construction of a tunnel under it
2018
[81] Influence of magnetite nanoparticles on the dielectric properties of metal oxide/polymer nanocomposites based on polypropylene
2018
[82] Synthesis of Metal Nano Wires by Template Method and their Characterization
2018
[83] 4 Natural fiber-based biocomposites
2017
[84] Influence of the V acancies on the B uckling B ehavior of a Single–Layered G raphene N anosheet
2017
[85] Design and Control of a Micro/Nano Load Stage for In-Situ AFM Observation and Nanoscale Structural and Mechanical Characterization of MWCNT-Epoxy …
2017
[86] Influence of the Vacancies on the Buckling Behavior of a Single–Layered Graphene Nanosheet
2017
[87] Numerical prediction of Young's modulus of MWCNTs/MnO2 nanocomposite
2017
[88] Computational Study of the Effects of Processing Parameters on the Nonlinear Elastoplastic Behavior of Polymer Nanoclay Composites
Journal of Composites Science, 2017
[89] Fabrication and Characterization of Electrospun Alumina Nanofibre Reinforced Polycarbonate Composites
2017
[90] Influence of mixing methods on the properties of high density polyethylene nanocomposites with different carbon nanoparticles
2017
[91] Влияние наночастиц магнетита на диэлектрические свойства нанокомпозитов оксид металла/полимер на основе полипропилена
2017
[92] Effect of filler loading, geometry, dispersion and temperature on thermal conductivity of polymer nanocomposites
Polymer Testing, 2017
[93] Interfacial mechanics of carbonaceous reinforcements in electrophoretically deposited nickel coatings
Surface and Coatings Technology, 2017
[94] Nanotechnology for Food Packaging and Food Quality Assessment
Advances in Food and Nutrition Research, 2017
[95] Electrochemical Application and AFM Characterization of Nanocomposites: Focus on Interphase Properties
Thesis, 2017
[96] Temperature-dependent surface nanomechanical properties of a thermoplastic nanocomposite
Journal of Colloid and Interface Science, 2017
[97] Analytical investigation of the acoustic behavior of nanocomposite porous media by using modified nonlocal Biot's equations
Journal of Vibration and Control, 2017
[98] Prediction of tensile modulus of PA-6 nanocomposites using adaptive neuro-fuzzy inference system learned by the shuffled frog leaping algorithm
e-Polymers, 2017
[99] Microstructural evidence for seismic and aseismic slip along clay‐bearing, carbonate faults
Journal of Geophysical Research: Solid Earth, 2017
[100] Should polymer nanocomposites be regarded as molecular composites?
Journal of Materials Science, 2017
[101] The effect of surface modification of Palygorskite on the morphology, mechanical, and thermal properties of Nylon 6/Palygorskite nanocomposites prepared by melt compounding
Polymer composites, 2017
[102] Study of the parameters controlling nanoparticle dispersion for nanocomposite geomembrane applications
2017
[103] Sintesis dan karakterisasi nanozeolit Y dari abu sekam padi dengan variasi suhu hidrotermal
2017
[104] Bending analysis of laminated SWCNT Reinforced functionally graded plate Using FEM
Curved and Layered Structures, 2017
[105] Theoretical and experimental investigation of vibration characteristic of carbon nanotube reinforced polymer composite structure
International Journal of Mechanical Sciences, 2017
[106] Nanoscale Characterization of Glass Flake Filled Vinyl Ester Anti-Corrosion Coatings
Coatings, 2017
[107] Local surface mechanical properties of PDMS-silica nanocomposite probed with Intermodulation AFM
Composites Science and Technology, 2017
[108] Elastic bending and stress analysis of carbon nanotube‐reinforced composite plate: Experimental, numerical, and simulation
Advances in Polymer Technology, 2017
[109] Bending behavior of SWCNT reinforced composite plates
2017
[110] Experimental investigation of the addition of multi walled carbon nanotubes on the mechanical properties of polyethylene/carbon nanotube injected composites
WASET, 2016
[111] SINTESIS DAN KARAKTERISASI NANOZEOLIT X DARI ABU SEKAM PADI
2016
[112] Experimental Study on Polyethylene/Carbon Nanotube Injected Composites
2016
[113] Chapter 35 Design Strategies of Green Polymer Nanocomposites Containing Amino Acid Linkages
2016
[114] Damage assessment of random multiwalled carbon nanotube-reinforced polymer nanocomposites
Science and Engineering of Composite Materials, 2016
[115] 소재분석 기술의 진화
CERAMIST, 2016
[116] Структура и трибологические свойства антифрикционных покрытий, модифицированных углеродными нанотрубками
2016
[117] SINTESIS DAN KARAKTERISASI NANOZEOLIT Y DARI ABU SEKAM PADI DENGAN VARIASI RASIO SiO2/Al2O3 MENGGUNAKAN TEMPLAT ORGANIK
2016
[118] Metal Nanocomposites: Synthesis, Characterization and their Applications
Science and applications of Tailored Nanostructures, 2016
[119] Effect of Carbon Nanotube Geometries on Mechanical Properties of Nanocomposite Via Nanoscale Representative Volume Element
2016
[120] Enhanced Wear Resistance of Transparent Epoxy Composite Coatings with Vertically Aligned Halloysite Nanotubes
ACS Applied Materials & Interfaces, 2016
[121] Hierarchical multiscale modeling of Polyvinyl Alcohol/Montmorillonite nanocomposites
Polymer, 2016
[122] Spray-Coated Halloysite–Epoxy Composites: A Means To Create Mechanically Robust, Vertically Aligned Nanotube Composites
ACS Applied Materials & Interfaces, 2016
[123] Comparison of the Fracture Resistance of Pulpotomized Primary Molars Restored with Various Tooth Bonded Restorative Material: An In Vitro Study
Journal of International Oral Health, 2016
[124] Computational Modeling of Polylactide and Its Cellulose-Reinforced Nanocomposites
2016
[125] Multiscale modeling of multiphase polymers
ProQuest Dissertations Publishing, 2016
[126] Simulation of the adhesion properties of the polyethylene/carbon nanotube interface
Polymer Science Series A, 2016
[127] 3D multiscale modeling to predict the elastic modulus of polymer/nanoclay composites considering realistic interphase property
Composite Interfaces, 2016
[128] Carbon nanotubes dispersed polymer nanocomposites: mechanical, electrical, thermal properties and surface morphology
Bulletin of Materials Science, 2016
[129] Effect of Halloysite nanotube on Microstructure, Rheological and Mechanical Properties of Dynamically Vulcanized PA6/NBR Thermoplastic Vulcanizates
Soft Materials, 2016
[130] Efeito de nanocargas de diferentes morfologias em borracha nitrílica hidrogenada
2016
[131] Transversely isotropic properties of carbon nanotube/polymer composites
Composites Part B: Engineering, 2016
[132] APPLICATION OF NANOTECHNOLOGY IN MONITORING AND CONTROL OF POLLUTION
2016
[133] Stress-responsive Nano-and Microcomposites Featuring Mechanophore Units
2016
[134] Sintesis dan karakterisasi nanozeolit X dari abu sekam padi menggunakan variasi suhu hidrotermal
2016
[135] 소재분석 기술의 진화: 나노인덴테이션
2016
[136] SABU THOMAS, International and Inter University Centre for Nanoscience and Nanotechnology & School of Chemical Sciences, Mahatma Gandhi University …
2016
[137] Sintesis dan karakterisasi nanokomposit TiO2/zeolit alam Malang dengan variasi waktu pemeraman
2016
[138] 以超臨界二氧化碳發泡製備石墨烯/熱塑性聚氨酯之微奈米孔洞發泡材料
2015
[139] Advanced multifunctional graphene aerogel–Poly (methyl methacrylate) composites: Experiments and modeling
Carbon, 2015
[140] UV-Visible, Mechanical and Anti-Microbial Studies of Chitosan-Montmorillonite Clay/TiO2 Nanocomposites
Research Journal of Recent Sciences ______________________________________________________________ ISSN, 2015
[141] Micromechanics predictions for two-phased nanocomposites and three-phased multiscale composites: A review
Journal of Reinforced Plastics and Composites, 2015
[142] Evaluating mechanical properties of nanoplatelet reinforced composites under mechanical and thermal loads
Journal of Computational and Theoretical Nanoscience, 2015
[143] Fabrication and characterization of silicon carbide/epoxy nanocomposite using silicon carbide nanowhisker and nanoparticle reinforcements
Journal of Composite Materials, 2015
[144] Mathematical modeling of structural and near-surface non-homogeneities in thermoelastic thin films
International Journal of Engineering Science, 2015
[145] Direct and Inverse Identification of Composites with Microstructure
Book of Abstracts-Extract, 2015
[146] Elaboration et caractérisation des nanocomposites polypropylène/silice (PP/SiO 2)
2015
[147] FAN ZENG
2015
[148] Effect of nanofillers on incompatible polymer blends
2015
[149] EVALUATION OF ELASTIC PROPERTIES AND PROGRESSIVE DAMAGE ANALYSIS OF BIOCOMPATIBLE NATURAL FIBER REINFORCED COMPOSITES
2015
[150] Design of a hybrid carbon fibre/carbon nanotube composite for enhanced lightning strike resistance
Aerospace Science and Technology, 2015
[151] A new approach for prediction of elastic modulus of polymer/nanoclay composites by considering interfacial debonding: Experimental and numerical investigations
Composites Science and Technology, 2015
[152] Natural Nano-based Polymers for Packaging Applications
Eco-friendly Polymer Nanocomposites, 2015
[153] Effective methodology for the production of novel nanocomposite films based on poly (vinyl chloride) and zinc oxide nanoparticles modified with green poly (vinyl alcohol)
Polymer Composites, 2015
[154] Structured strengthening by two-wave optical ablation in silica with gold nanoparticles
Optics & Laser Technology, 2015
[155] Effects of nanoparticle size and content on mechanical properties of dental nanocomposites: experimental versus modeling
Iranian Polymer Journal, 2015
[156] Interfacial Damage of Fiber/Matrix Composite under Mechanical and Physical Loading
International Journal of Engineering and Applied Sciences, 2015
[157] Matrix-dependent Strain Distributions of Au and Ag Nanoparticles in a Metal-oxide-semiconductor-based Nonvolatile Memory Device
Nanomaterials And Nanotechnology, 2015
[158] A Finite Element Study on the Effect of Curvature on the Reinforcement of Matrices by Randomly Distributed and Curved Nanotubes
Journal of Computational and Theoretical Nanoscience, 2015
[159] بررسی تاثیر اصلاح سطح نانولوله های کربنی بر خواص مکانیکی نانوکامپوزیت Al/CNT‎
چهارمین همایش بین‌المللی و نهمین همایش مشترک انجمن مهندسین متالورژی ایران و انجمن علمی ریخته‌گری ایران،, 2015
[160] Role of the silica nanoparticle anisotropy on morphological and mechanical properties of Styrene Butadiene Rubber nanocomposites.
2015
[161] Injection Molded Poly (Ethylene Terephthalate)-Graphene Nanocomposites
ProQuest Dissertations Publishing, 2015
[162] EVALUATION OF ELASTIC PROPERTIES AND PROGRESSIVE DAMAGE ANALYSIS OF BIOCOMPATIBLE NATURAL FIBER REINFORCED …
2015
[163] Microstructural Finite Element Modeling and Simulation on Al–MgO Composites
International Journal of Computational Methods, 2015
[164] Mechanical Characterization of 2D Nanomaterials and Composites
Advanced Computational Nanomechanics, 2015
[165] Nanomaterials Definitions, Classifications, and Applications
2015
[166] The Effect of Temperature and Nanoclay on the Low Velocity and Ballistic Behavior of Woven Glass-Fiber Reinforced Composites
ProQuest Dissertations Publishing, 2015
[167] OBJECT ORIENTED FINITE ELEMENT MODELLING AND FRACTURE ANALYSIS OF EPOXY-CLAY NANOCOMPOSITE
2014
[168] Nanocompósitos de polietileno com grafenos ou nanotubos de carbono
2014
[169] Multiscale Modelling of Elastic Properties of Non-bonded Single-Walled Carbon Nanotube Polymer Matrix Composites
2014
[170] Study some of the mechanical characteristics for polymer matrix composite reinforced by toner carbon nanoparticles TCNP
Wasit Journal for Science & Medicine, 2014
[171] 以超臨界二氧化碳發泡技術製備熱塑性聚氨酯微米泡材
臺北科技大學化學工程研究所學位論文, 2014
[172] 聚苯乙烯/奈米石墨複合材料及泡材機械性質及泡孔型態之探討
臺北科技大學化學工程研究所學位論文, 2014
[173] Shape controlled spherical (0D) and rod-like (1D) silica nanoparticles in silica/styrene butadiene rubber nanocomposites: Role of the particle morphology on the filler reinforcing effect
Polymer, 2014
[174] SIF Prediction of Nanocomposite With Interfacial Debonding
ASME 2014 International Mechanical Engineering Congress and Exposition, 2014
[175] Organoclay-Polymer Nanocomposites
2014
[176] APPROXIMATIVE PROCEDURE TO HOMOGENIZATION OF MICROSTRUCTURED COMPOSITE MATERIALS
2014
[177] Mechanical behavior and optical transparency of polyamide 6 of different morphology formed by variation of the pathway of crystallization
Polymer Bulletin, 2014
[178] A new method for characterizing the interphase regions of carbon nanotube composites
International Journal of Solids and Structures, 2014
[179] Tribological behavior of aluminum-matrix composites reinforced with carbon nanostructures
Inorganic Materials: Applied Research, 2014
[180] Nanocomposites based on epoxy resin. Simulation of microindentation process
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2014
[181] Effect of alkali‐resistant glass fiber on polypropylene/polystyrene blends: Modeling and characterization
Polymer Composites, 2014
[182] Optimal mechanical and gas permeation properties of polypropylene-organically modified montmorillonite (PP-OMMT) nanocomposites
Journal of Polymer Engineering, 2014
[183] Continuum Modeling Techniques to Determine Mechanical Properties of Nanocomposites
International Journal Of Modern Engineering Research (IJMER), 2014
[184] Dynamic Analysis of Single Walled Boron Nitride Nanotube Reinforced Composite Based Nanomechanical Resonator
Journal of The Institution of Engineers (India): Series D, 2014
[185] CHARACTERISATION OF HYBRID NANOCOMPOSITES
MIT Campus - 119.18.60.68, 2014
[186] Modeling tensile modulus of (polyamide 6)/nanoclay composites: Response surface method vs. taguchi‐optimized artificial neural network
Journal of Vinyl and Additive Technology, 2014
[187] Preparation of Polymer-Clay Nanocomposites by Melt Mixing in a Twin Screw Extruder: Using On-Line SAOS Rheometry to Assess the Level of Dispersion
International Polymer Processing, 2014
[188] Thickness-Dependent Strain Effect on the Deformation of the Graphene-Encapsulated Au Nanoparticles
Journal of Nanomaterials, 2014
[189] RICARDO FISCHER BRANDENBURG
2014
[190] Mechanical–Viscoelastic Characterization in Nanocomposites
Polymer Composites: Volume 2, 2013
[191] Synthesis and characterization of near-infrared heptamethine indocyanine dyes and intercalated nanocomposites
2013
[192] Investigating Impact of The Interfacial Debonding on The Mechanical Propertiesof NanoFiber Reinforced Composites
2013
[193] Buffeting mitigation using carbon nanotube composites: a feasibility study
Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 2013
[194] Carbon nanotube/polymer nanocomposites: a brief modeling overview
Key Engineering Materials, 2013
[195] Predicting nonlinear stress–strain curves of unidirectional fibrous composites in consideration of stick–slip
Composites Part B: Engineering, 2013
[196] Characterization of Copper Carbon Composites Manufactured Using the Electroless Precipitation Process
Materials and Manufacturing Processes, 2013
[197] The Impact of Embedded Nanoinclusion in Nanofiber Reinforced Composite.
Physical Review & Research International, 2013
[198] Micropolar-based modeling of size effects on stiffness and yield stress of nanoparticles-modified polymer composites
Computational Materials Science, 2013
[199] Role of nanoparticle dispersion and filler-matrix interface on the matrix dominated failure of rigid C< sub> 60-PE nanocomposites: A molecular dynamics simulation study
Polymer, 2013
[200] Fracture analysis of epoxy/SWCNT nanocomposite based on global–local finite element model
Composites Part B: Engineering, 2013
[201] Multiscale design and life-cycle based sustainability assessment of polymer nanocomposite coatings
2013
[202] UNDERSTANDING EFFECTS OF NANO-REINFORCEMENT–MATRIX INTERPHASE ON THE ELASTIC RESPONSE OF POLYMER NANOCOMPOSITES
2013
[203] Holes Effects in Plane Periodic Multilayered Viscoelastic Media
Open Journal of Acoustics, 2013
[204] Development of Laminated Carbon Nanofiber Reinforced Polyurethane Composites
2013
[205] 奈米石墨片/聚苯乙烯奈米複合材料之製備及其泡材性質研究
2013
[206] Effects of carbon nanoreinforcements of different shapes on the mechanical properties of epoxy‐based nanocomposites
Macromolecular Materials and Engineering, 2013
[207] Role of nanoparticle dispersion and filler-matrix interface on the matrix dominated failure of rigid C60-PE nanocomposites: A molecular dynamics simulation study
Polymer, 2013
[208] СТРУКТУРА И СВОЙСТВА НАНОСТРУКТУРНЫХ КОМПОЗИЦИОННЫХ МАТЕРИАЛОВ СИСТЕМЫ АЛЮМИНИЙ—ОНИОНЫ
2013
[209] Трибологические свойства алюмоматричных композиционных материалов, упрочненныхуглеродными наноструктурами
2013
[210] First Essentials Toward Environmental Flows for São Francisco River (Brazil): Recovering Damaged Ecosystems and Meeting Human Needs
2013
[211] METHOD AI^ THliai CHAMamm^ TIQ^
2013
[212] Tissue engineering and regenerative medicine: a nano approach
2012
[213] Analytical modeling of nanocomposite stiffness
2012
[214] Identification of mechanical properties of graphene-epoxy nanocomposites using nanoindentation technique
2012
[215] The Effects of Filler-Matrix Interface Strength, Filler Shape and Filler Dispersion on the Mechanical Properties of Polymer Nanocomposites
2012
[216] Structural composites hybridized with epoxy compatible polymer/MWCNT nanofibrous interlayers
Composites Science and Technology, 2012
[217] Nanoscale Structural and Mechanical Characterization of MWCNT-Reinforced Polymer Composites
Journal of Engineering Materials and Technology, 2012
[218] Effect of carbon nanotube orientation on the mechanical properties of nanocomposites
Composites Part B: Engineering, 2012
[219] Nanoscale analysis of plasticity and fracture of the sheet metal structures
Procedia Computer Science, 2012
[220] Optimization of Mechanical Properties of Polypropylene-based Composite
2012
[221] Interface Investigations on Titanium Nitride Bilayer Systems
2012
[222] Polyethylene terephthalate-graphene nanocomposites
US Patent App. 14/115,580, 2012
[223] Mnogomasshtabnoe modelirovanie polimernykh nanokompozitov
EN Voronina - Yadernaya fizika, 2011, 2011
[224] Nanoscale Structural and Mechanical Characterization of Nanowire-Reinforced Polymer Composites
ASME 2011 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2011
[225] A model for elastic hysteresis of unidirectional fibrous nano composites incorporating stick-slip
Materials Science and Engineering: A, 2011
[226] Multiscale simulation of polymer nanocomposites
Physics of Atomic Nuclei, 2011
[227] Studies on acrylonitrile–butadiene copolymer (NBR) layered silicate composites: mechanical and viscoelastic properties
Journal of Composite Materials, 2011
[228] Evaluation of Nanocomposites for Shielding Electromagnetic Interference
2011
[229] Многомасштабное моделирование полимерных нанокомпозитов
2011
[230] Preparation, characterization and properties of injection molded graphene nanocomposites
2010
[231] УПРУГИЕ ПОЛЯ НАНОСКОПИЧЕСКИХ ВКЛЮЧЕНИЙ В НАНОКОМПОЗИТАХ
Materials Physics and Mechanics, 2010
[232] Role of the silica nanoparticle anisotropy on morphological and mechanical properties of Styrene Butadiene Rubber nanocomposites
[233] Computational Models for Modulus of Elasticity of Epoxy Coatings Modified With Various Nano-Particles
[234] بررسی تجربی اثر افزودن نانولوله‌های کربنی درون مادّه‌ی زمینه، بر رفتار کمانشی ورق‌های کامپوزیتی الیاف شیشه/اپوکسی‎
Free SCIRP Newsletters
Copyright © 2006-2022 Scientific Research Publishing Inc. All Rights Reserved.
Top