Modern Mechanical Engineering

Modern Mechanical Engineering

ISSN Print: 2164-0165
ISSN Online: 2164-0181
www.scirp.org/journal/mme
E-mail: mme@scirp.org
"Design Optimization of Shell and Tube Heat Exchanger by Vibration Analysis"
written by S. H. Gawande, A. A Keste, L. G Navale, M. R Nandgaonkar, V. J Sonawane, U. B Ubarhande,
published by Modern Mechanical Engineering, Vol.1 No.1, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] A novel methodology for design optimization of heat recovery steam generators with flow-induced vibration analysis
2021
[2] Fluid elastic instability and vortex induced vibration parameters in finned tube arrays with P/D ratio 1.79
World Journal of Engineering, 2021
[3] Optimization of Shell and Tube Condenser for Low Temperature Thermal Desalination Plant
E3S Web of …, 2021
[4] Multiphysics field coupling simulation for shell-and-tube heat exchangers with different baffles
2019
[5] Investigation of the Effects of the Incident Flow Angle on Vibration Behavior in Heat Exchanger Tube Bundle
2019
[6] STUDY ON PERFORMANCES OF SHELLSIDE OF THE BLADE BAFFLE HEAT EXCHANGER WITH DIFFERENT ARRANGEMENT OF BAFFLE
2018
[7] Forecasting Performance of Organic Rankine Cycle (ORC) Used in Shell-and-tube Heat Exchanger by PSO Technique
Jour of Adv Research in Dynamical & Control Systems, , 2018
[8] Application of response surface method and multi-objective genetic algorithm to configuration optimization of Shell-and-tube heat exchanger with fold helical baffles
Applied Thermal Engineering, 2018
[9] Performance investigation on shell-and-tube heat exchangers with different baffles based on fluid-structure interaction
2018
[10] Performance of shell-and-tube heat exchangers with different baffles applied to water chillers based on fluid-structure interaction
2018
[11] 折面螺旋折流板换热器的流动传热性能
2017
[12] Estimation and Analysis of Cycle Efficiency for Shell and Tube Heat Exchanger by Genetic Algorithm
2017
[13] Approach Flow Direction Effects on the Dynamics of a Loosely Supported Tube Array
2017
[14] Configuration optimization of shell-and-tube heat exchangers with helical baffles using multi-objective genetic algorithm based on fluid-structure interaction
International Communications in Heat and Mass Transfer, 2017
[15] COMPARATIVE VIBRATION ANALYSIS OF SEGMENTAL BAFFLES WITH NO TUBES IN WINDOW BAFFLES IN STHE USING CHEMCAD
2017
[16] 折面螺旋折流板换热器的流动传热性能实验研究
2017
[17] Model and analysis of shell and tube heat exchanger by using exhaust gases of diesel generator
Journal of Chemical and Pharmaceutical Sciences, 2016
[18] Design, Fabrication and Characterization of an appropriate Solar Thermal Electricity Generating System
2015
[19] Research on varying condition characteristic of feedwater heater considering liquid level
Applied Thermal Engineering, 2014
[20] Vibration Analysis of Shell and Tube Heat Exchanger for Low Temperature Thermal Desalination Plant
2014
[21] Vibration Analysis Of AES Type Shell And Tube Heat Exchanger By HTRI Software
Int. J. Adv. Engg. Res. Studies/III/I/Oct.-Dec, 2013
[22] Analysis of STHE to Identify Low Stress Area for Locating Nozzle Opening
IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 2013
[23] REVIEW ON FLUID-ELASTIC INSTABILITY IN FINNED TUBE ARRAYS
Int. J. Mech. Eng. & Rob. Res., 2013
[24] Vibration Analysis Of An Evaporator Using Chemcad
[25] MATERIAL OPTIMIZATION AND SELECTION FOR THE DESIGN OF SHELL AND TUBE HEAT EXCHANGER
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top