Journal of Materials Science and Chemical Engineering

Journal of Materials Science and Chemical Engineering

ISSN Print: 2327-6045
ISSN Online: 2327-6053
www.scirp.org/journal/msce
E-mail: msce@scirp.org
"A Study of Quality Improvement of Natural Rubber Products by Drying Methods"
written by Felix Osarumhense Aguele, Justice Agbonayinma Idiaghe, Tochukwu Uzoma Apugo-Nwosu,
published by Journal of Materials Science and Chemical Engineering, Vol.3 No.11, 2015
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Recovery of tire rubber waste after UV treatment as a recycled aggregate in cementitious composites
Materials Today: Proceedings, 2022
[2] Modified natural rubber glove with spent coffee grounds for prothesis arm cover
Materials Today …, 2021
[3] A natural rubber waste derived surfactant for high internal phase emulsion templating of poly (dicyclopentadiene)
2021
[4] Production and properties of natural rubber glove using sustainable benign accelerator
2021
[5] Thermo-oxidative degradation of vulcanized SBR: A comparison between ultraviolet (UV) and microwave as recovery techniques
2021
[6] A Comparative Study of Thermal Aging Effect on the Properties of Silicone-Based and Silicone-Free Thermal Gap Filler Materials
2021
[7] The effect of additive dosages on crepe quality produced
2021
[8] Reliability Enhancement of Heterogeneous 3D Integrated Circuit and Characterization of Thermal Interface Material
2020
[9] Aplikasi asetaldehida melalui teknik perendaman terhadap karakteristik mutu teknis karet alam
2020
[10] Characterization on the Thermal Oxidation of Raw Natural Rubber Thin Film using Image and FT-IR Analysis
2020
[11] KARAKTERISTIK KARET SHEET DENGAN BAHAN PENGISI ARANG AKTIF BAMBU
2020
[12] PV Powered Rubber Sheet Dryer
2019
[13] THE EFFECT OF MICROWAVE ENERGY ON THE VULCANIZED SKELETON OF SBR
15th Brazilian Polymer Conference, 2019
[14] STUDY ON VULCANIZED RUBBER DEGRADATION AFTER EXPOSURE TO ULTRAVIOLET IRRADIATION
15th Brazilian Polymer Conference, 2019
[15] Effect of modified keratin from renewable sources on composites properties of synthetic isoprene rubber
2019
[16] A novel quality requirement design method for the quality characteristic of rubber products based on the reliability constraint
2018
[17] A Review-Production of Ribbed Smoked Sheet in Chattogram Hill Tracts of Bangladesh and Assessment of Heavy Metals in Itself.
IOSR Journal of Applied Chemistry, 2018
[18] Experimental and Numerical Study for Convective Drying of Deformable Rubber Sheet
2018
[19] A review-production of ribbed smoked sheet in Chattogram Hill Tracts of Bangladesh and assessment of heavy metals in itself
Journal of Applied …, 2018
[20] Karakteristik Karet Sheet dengan Bahan Baku Komposit Modifikasi Pati-Lateks
2017
[21] Peningkatan mutu blanket karet alam melalui proses predrying dan penyemprotan asap cair
2017
[22] Characteristics of Rubber Sheet with Raw Material of Composite Modifications-Latex
2017
[23] Rubber Processing is detrimental to environment: A case study
International Journal of Scientific & Engineering Research, 2016
[24] Adoption and Impact of The Implementation of Smallholders Rubber Post-Harvest Standard Operating Procedures in Dharmasraya District, West Sumatra
2016
[25] Adopsi dan Dampak Penerapan Standard Operating Procedure Pascapanen Karet Rakyat Di Kabupaten Dharmasraya, Sumatera Barat
2016
[26] WILLIAM DI SALVI
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top