Preparation & Characterization of Al-5083 Alloy Composites

Journals Menu

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org

Google-based Impact Factor: 1
Citations h5-index & Ranking*

Journals Menu

"Preparation & Characterization of Al-5083 Alloy Composites"
written by Sourabh Gargatte, Rahul R. Upadhye, Venkatesh S. Dandagi, Srikanth R. Desai, Bhimappa S. Waghamode,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.1 No.1, 2013

has been cited by the following article(s):

Google Scholar
CrossRef

[1]	Experimental investigation on tribological performance and development of wear prediction equation of aluminium composite at elevated temperatures
	International Journal on …, 2022

[2]	Study of mechanical and wear behaviour of AA5083 graphene reinforced composites
	KOVOVE MATERIALY …, 2022

[3]	Investigación del comportamiento al desgaste por deslizamiento en seco de materiales compuestos de matriz metálica AA5083/NANO-Al2O3
	Revista de …, 2022

[4]	Comparative investigation of corrosion rate on A-36 steel with different coatings include ZnO and TiO2 nanoparticles using linear polarization resistance …
	Revista de …, 2021

[5]	Microstructural and Tribological Behavior of 5083-TiB2 Cast Composites Fabricated by a Flux-Assisted Synthesis Technique
	Advanced Materials …, 2021

[6]	Investigations on tensile fractography and wear characteristics of Al7075-Al2O3-SiC Hybrid Metal Matrix Composites routed through liquid metallurgical techniques
	2021

[7]	Development and characterization of aluminum matrix composite reinforced with continuous stainless-steel fibers
	2021

[8]	Investigations on tensile fractography and wear characteristics of Al7O75-Al2O3-SiC Hybrid Metal Matrix Composites routed through liquid metallurgical techniques.
	2021

[9]	The investigation of the effect of nano particles on dry sliding wear and corrosion behavior of Al-Mg/Al2O3 composites
	surface topography …, 2021

[10]	Effect of tungsten carbide on Al6061/SiC hybrid metal matrix composites
	Compos. Theory …, 2021

[11]	A Critical Review on Synthesis of Aluminum Metallic Composites through Stir Casting: Challenges and Opportunities
	2020

[12]	VAKUMLU İNFİLTRASYONYA ÜRETİLEN AA 1050 ESASLI GNP+ TiB2 TAKVİYELİ HİBRİT KOMPOZİTLERİN ABRASİF AŞINMA DAVRANIŞLARININ İNCELENMESİ
	2020

[13]	Dry sliding wear characteristics of aluminium metal matrix composites: a brief overview
	2019

[14]	A comprehensive review on material selection, processing, characterization and applications of aluminium metal matrix composites
	2019

[15]	A review on the production of metal matrix composites through stir casting–Furnace design, properties, challenges, and research opportunities
	2019

[16]	Conventional stir casting versus ultrasonic assisted stir casting process: Mechanical and physical characteristics of AMCs
	2019

[17]	Wear Performance Analysis of Aluminum Matrix Composites and Optimization of Process Parameters Using Statistical Techniques
	2019

[18]	Nanocomposites of Al5083/SiC; strength and wear behaviors
	2019

[19]	Investigation on Microstructure, Mechanical Properties and Fracture Mechanism of Trimodal SiC Reinforced Al5083/Al2024 Aluminum Alloy Based Nanocomposites Fabricated by Mechanical Milling and Hot Extrusion Processes
	Transactions of the Indian Institute of Metals, 2018

[20]	Investigations on Wear Behaviour of Micro B4C Particulates Reinforced Al7010 Alloy Composites
	IOP Conference Series: Materials Science and Engineering, 2018

[21]	Dry Sliding Wear Behaviour of Aluminium 6061-SiC-Graphite Particulates Reinforced Hybrid Composites
	IOP Conference Series: Materials Science and Engineering, 2018

[22]	Wear behavior of AA 5083/SiC nano-particle metal matrix composite: Statistical analysis
	IOP Conference Series: Materials Science and Engineering, 2018

[23]	Investigation on Hardness of Al 7075/Al2O3/SiCp Hybrid Composite Using Taguchi Technique
	Materials Today: Proceedings, 2018

[24]	Wear behavior of AA 5083/SiC nanoparticle metal matrix composite: Statistical analysis
	2018

[25]	Investigations on Wear Behaviour of Micro B 4 C Particulates Reinforced Al7010 Alloy Composites
	2018

[26]	A survey on effects of reinforcement on aluminium metal matrix composites
	2017

[27]	Fabrication and Wear Analysis of Aluminium Matrix Composite Reinforced by SiC Micro and Nano Particles
	2017

[28]	Influence of tool pin in friction stir welding on activated carbon reinforced aluminium metal matrix composite
	IOP Conference Series: Materials Science and Engineering, 2017

[29]	Fabrication of A359 Alloy Reinforced With B4C Particulates & Characterization of Mechanical Properties
	International Conference on Computational nad Experimental Methods in Mechanical Engineering, 2017

[30]	A REVIEW ON PROCESSING AND TRIBOLOGICAL PROPERTIES OF METAL MATRIX COMPOSITES
	International Journal of Advancement in Engineering Technology Management & Applied Science, 2016

[31]	Dry Sliding Wear Behaviour of Aluminium Alloy 6061-Redmud Metal Matrix Composites by Stir Casting Method
	IJCTA, 2016

[32]	Fabrication, Synthesis and Characterization of Particle Reinforced Aluminium Matrix Composite
	2015

[33]	Effect of ruthenium complex dye sensitizer on photo-conversion efficiency of ZnO nanoparticles based dye sensitized solar cells
	2015

[34]	Assessment of Tensile and Hardness Property of AA5083/Nano-Al2O3 Metal Matrix Composites
	International Journal of Composite Materials and Matrices, 2015

[35]	Fabrication and Characterisation of Aluminium Metal Matrix Composite and its Buckling Analysis through FEM
	ADVANCES IN MECHANICAL, AUTOMOBILE AND PRODUCTION ENGINEERING, 2015

[36]	A Review on Fabrication and Characterization of Aluminium Metal Matrix Composite (AMMC)
	International Journal, 2014

[37]	Study of Abrasive Wear of Al-Zn-Mg Alloy by Taguchi Method
	International Journal of Engineering Research and Technology, 2013

[38]	Optimization Of Process Parameters Using Failure Mode And Effect Analysis (Fmea) And Taguchi Method
	2013

[1]	Mechano-tribological investigations of Al-%Wt. of boron nitride as metal-ceramic composites INTERNATIONAL CONFERENCE ON RECENT TRENDS IN COMPOSITE SCIENCES WITH COMPUTATIONAL ANALYSIS, 2024 DOI:10.1063/5.0182965

[2]	FE simulation of uniaxial tensile behavior of SiC reinforced AA5083 alloy Matéria (Rio de Janeiro), 2024 DOI:10.1590/1517-7076-rmat-2023-0173

[3]	Effect of Control Factors on Wear Rate of the Ceramic Particulate Filled Metal Alloy Composites: A Comparative Analysis Arabian Journal for Science and Engineering, 2023 DOI:10.1007/s13369-022-07576-w

[4]	Dry sliding wear response of aluminium matrix composites (AMCs): a critical review Materials Research Express, 2023 DOI:10.1088/2053-1591/acb63c

[5]	Study of various types of aluminium alloy grade series and their effect on mechanical performance Materials Today: Proceedings, 2023 DOI:10.1016/j.matpr.2023.04.635

[6]	Experimental investigation on tribological performance and development of wear prediction equation of aluminium composite at elevated temperatures International Journal on Interactive Design and Manufacturing (IJIDeM), 2022 DOI:10.1007/s12008-022-00911-3

[7]	Investigación del comportamiento al desgaste por deslizamiento en seco de materiales compuestos de matriz metálica AA5083/NANO-Al2O3 Revista de Metalurgia, 2022 DOI:10.3989/revmetalm.213

[8]	Influence of fillers on mechanical behaviour of carbon fiber/vinyl ester hybrid composites Materials Today: Proceedings, 2021 DOI:10.1016/j.matpr.2020.09.165

[9]	The investigation of the effect of nano particles on dry sliding wear and corrosion behavior of Al-Mg/Al2O3 composites Surface Topography: Metrology and Properties, 2021 DOI:10.1088/2051-672X/ac41ff

[10]	VAKUMLU İNFİLTRASYONYA ÜRETİLEN AA 1050 ESASLI GNP+TiB2 TAKVİYELİ HİBRİT KOMPOZİTLERİN ABRASİF AŞINMA DAVRANIŞLARININ İNCELENMESİ Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, 2020 DOI:10.28948/ngumuh.669072

[11]	Nanocomposites of Al5083/SiC; strength and wear behaviors Materials Research Express, 2019 DOI:10.1088/2053-1591/ab3b91

[12]	Wear Characteristics Comparison of Cast and Powder Metallurgy Based Al and Al-Si Alloy [LM6] Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2017.11.501

[13]	Dry Sliding Wear Behaviour of Aluminium 6061-SiC-Graphite Particulates Reinforced Hybrid Composites IOP Conference Series: Materials Science and Engineering, 2018 DOI:10.1088/1757-899X/310/1/012156

[14]	Investigations on Wear Behaviour of Micro B4C Particulates Reinforced Al7010 Alloy Composites IOP Conference Series: Materials Science and Engineering, 2018 DOI:10.1088/1757-899X/310/1/012155

[15]	Wear behavior of AA 5083/SiC nano-particle metal matrix composite: Statistical analysis IOP Conference Series: Materials Science and Engineering, 2018 DOI:10.1088/1757-899X/324/1/012087

[16]	Investigation on Hardness of Al 7075/Al2O3/SiCp Hybrid Composite Using Taguchi Technique Materials Today: Proceedings, 2018 DOI:10.1016/j.matpr.2018.06.614

[17]	Influence of tool pin in friction stir welding on activated carbon reinforced aluminium metal matrix composite IOP Conference Series: Materials Science and Engineering, 2017 DOI:10.1088/1757-899X/247/1/012015

Follow SCIRP

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

Journals Menu

Home

About SCIRP

Service

Policies