"Simulation and Experimental Study on the Atomization Character of the Pressure-Swirl Nozzle"
written by Jianbo Zhao, Lijun Yang,
published by Open Journal of Fluid Dynamics, Vol.2 No.4A, 2012
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Numerical investigation of the full-cone spray structure and characteristics provided by a jet-swirl atomizer
2019
[2] Relative Deviation of Mass Flow Rate in Swirl Injectors due to the Engineering Tolerances: Experimental Study
International Journal of Aeronautical and Space Sciences, 2018
[3] 背压差影响下压力旋流式喷嘴喷雾性能的实验研究
2018
[4] Numerical Study on Swirl Coaxial Injectors with Different Recess Lengths
2018
[5] ANSYS FLUENT 를 이용한 동축 와류형 분사기 유동특성 연구
Proceedings of the 2017 KSPE Spring Conference, 2017
[6] Development of an electronic aerosol atomisation system for generating three-dimensional (3D) cells in microencapsulations and microtissues characterisation
2017
[7] DEVELOPMENT OF AN ELECTRONIC AEROSOL ATOMISATION SYSTEM FOR GENERATING THREE-DIMENSIONAL (3D) CELLS IN …
2016
[8] Modeling of Effervescent Spray with Secondary Atomization within a Furnace
2016
[9] Optimization study on pin tip diameter of an impact-pin nozzle at high pressure ratio
Journal of Mechanical Science and Technology, 2016
[10] A study of the probability distribution of pool fire extinguishing times using water mist
Process Safety and Environmental Protection, 2015
[11] ОСОБЕННОСТИ ИСПОЛЬЗОВАНИЯ ЦЕНТРОБЕЖНЫХ ДВУХСТУПЕНЧАТЫХ ФОРСУНОК В КОНСТРУКЦИИ ГИБРИДНЫХ РАКЕТНЫХ ДВИГАТЕЛЕЙ ГЛУБОКОГО РЕГУЛИРОВАНИЯ ТЯГИ
Вестник Южно-Уральского государственного университета. Серия: Машиностроение, 2015
[12] OPTIMIZATION STUDY OF AN IMPACT-PIN SPRAY NOZZLE AT HIGH PRESSURE RATIOS
Abstract of the ASME-JSME-KSME Joint Fluids Engineering Conference, 2015