"Effect of Welding on Microstructure and Mechanical Properties of an Industrial Low Carbon Steel"
written by Zakaria Boumerzoug, Chemseddine Derfouf, Thierry Baudin,
published by Engineering, Vol.2 No.7, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Thermal Transport Phenomena in Multi-layer Deposition Using Arc Welding Process
3D Printing and Additive Manufacturing Technologies, 2019
[2] Welding effect on tensile strength of grade S690Q steel butt joint
Journal of Constructional Steel Research, 2019
[3] Modelling and prediction of the mechanical properties of TIG welded joint for AISI 4130 low carbon steel plates using Artificial Neural Network (ANN) approach
2019
[4] Microstructure and strain rate sensitivity behavior of SM490 structural steel weld zone investigated using indentation
2019
[5] Influence of Welding Sequence on Residual Stresses Induced in As-Welded Plug Weld of Low-Carbon Steel Plate
2019
[6] Experimental investigation on CO2 laser butt welding of AISI 304 stainless steel and mild steel thin sheets
2019
[7] Influence of Operating Parameters on CO2 Laser Welded Butt Joints of AISI 304 Stainless Steel Thin Sheets
2019
[8] Effect of fusion and friction stir welding techniques on the microstructure, crystallographic texture and mechanical properties of mild steel
2019
[9] A review of weldability of carbon steel in arc-based welding processes
2019
[10] Regolith-Based Construction Materials for Lunar and Martian Colonies
2018
[11] ISOLATION, SENSITIVITY PATTERNS AND MOLECULAR CHARACTERISATION OF BACTERIAL ISOLATES FROM INFECTED DIABETIC FOOT ULCERS IN …
2018
[12] Investigation of Microstructure and Mechanical Properties of Heat Affected Zone in Manual Arc Welded Mild Steel
2018
[13] ISOLATION, SENSITIVITY PATTERNS AND MOLECULAR CHARACTERISATION OF BACTERIAL ISOLATES FROM INFECTED DIABETIC FOOT …
2018
[14] Effect of Welding Parameters on the Corrosion Behavior of Dissimilar Alloy Welds of T6 AA6061 Al-Galvanized Mild Steel
Journal of Materials Engineering and Performance, 2018
[15] Mechanical Characterization of Welded API X70 Steel Exposed to Air and Seawater: A review
IOP Conference Series: Materials Science and Engineering, 2018
[16] The methods for determining the CTOD at crack initiation
In?ynieria Materia?owa, 2018
[17] Investigation of fracture process of S355JR steel in transition region using metallographic and fractographic tests and numerical analysis
2018
[18] Failure Analysis of the Screw Connection Rod of A Hoisting Machine
2018
[19] INVESTIGATION OF FRACTURE PROCESS OF S355JR STEEL IN TRANSITION REGION USING METALLOGRAPHIC AND FRACTOGRAPHIC TESTS AND …
2018
[20] Microstructure-sensitive estimation of small fatigue crack growth in bridge steel welds
International Journal of Fatigue, 2018
[21] Adoptability Analysis of Water Plasma ARC Welding For Mild Steel Pieces
International Journal of Engineering Computational Research and Technology, 2018
[22] CHARACTERIZATION OF MICROSTRUCTURE AND MECHANICAL PROPERTIES IN THE HAZ OF EN24 STEEL AFTER POST WELD HEAT TREATMENT
Thesis, 2018
[23] Influences of process parameters on weld strength of low carbon alloy steel in purged SAW
Materials Today: Proceedings, 2018
[24] A COMPARATIVE STUDY OF RESIDUAL STRESS AND MECHANICAL PROPERTIES FOR FSW AND TIG WELD ON STRUCTURAL STEEL
Archives of Metallurgy and Materials, 2018
[25] Study the Change of Current Weld on Mechanical Properties and Microstructure of Low Carbon Steel Welded by Electric Arc Welding
Journal of University of Babylon, 2017
[26] ANALYTICAL AND PRACTICAL ASSESSMENT OF HIGHER STRENGTH HOT-ROLLED PLATE WELDABILITY
2017
[27] Evaluation of Tensile Strength of a Butt-Welded Joint Considering the Effect of Welding Parameters Using Response Surface Methodology
Materials Today: Proceedings, 2017
[28] Determination of Hardness and Tensile Properties of Dissimilar Phase Structured Steel Weld
2017
[29] Kajian Kekuatan Tarik dan Struktur Mikro Hasil Pengelasan Shield Metal Arc Welding dan Friction Stir Welding Baja Karbon St 37
2017
[30] THE EFFECT OF MICROSTRUCTURAL CHANGES ON THE CORROSION RESISTANCE OF WELDED AISI 1036 STEEL IN CHLORIDE ENVIRONMENT
2017
[31] Modelling and experimental validation of moving tilted volumetric heat source in gas metal arc welding process
Journal of Materials Processing Technology, 2017
[32] Impact of welding on the strength of high performance steel T-stub joints
Journal of Constructional Steel Research, 2017
[33] The effect on deflection of steel diaphragm of pressure sensor due to change in boundary condition in the welded region
Journal of Mechanical Science and Technology, 2017
[34] INFLUENCE OF HEAT TREATMENTS ON THE MICROSTRUCTURE OF WELDED API X70 PIPELINE STEEL
2017
[35] IDENTIFICATION OF DISLOCATIONS, GRAIN BOUNDARY SLIDING AND POINT DEFECTS WITH THE AID OF SEM ANALYSIS
2017
[36] Characteristics of microstructural phases relevant to the mechanical properties in structural steel weld zone studied by using indentation
Construction and Building Materials, 2017
[37] Theoretical and Experimental Study of the Fatigue Behavior of Large Passenger Transport Vehicles under Dynamic Operationg Loads
Thesis, 2017
[38] Theoretical and experimental study of the fatigue behavior of large passenger transport vehicles under dynamic operating loads
2017
[39] Parametric Design for Purged Submerged Arc Welding on Strength of Low Carbon Steel
2016
[40] Testing the mechanical properties of S355JR steel with different types of microstructure
Problemy Eksploatacji, 2016
[41] SEM/DRX/EBSD charaterization of electricsubmerged arc welded of an industrial mow carbonsteel
2016
[42] An investigation on co-axial water-jet assisted fiber laser cutting of metal sheets
Optics and Lasers in Engineering, 2016
[43] MICROSTRUCTURE AND MECHANICAL PROPERTIES OF WELDS IN PIPELINE STEEL
2016
[44] Assessment of health consequences of steel industry welders' occupational exposure to ultraviolet radiation
International Journal of Preventive Medicine, 2015
[45] Determination of mechanical properties in SM490 steel weld zone using nanoindentation and FE analysis
Journal of Constructional Steel Research, 2015
[46] Effect of initial microstructure on austenite formation kinetics in high-strength experimental microalloyed steels
International Journal of Minerals, Metallurgy, and Materials, 2015
[47] Influence of temperature and alloying on the apparent diffusivity of hydrogen in high strength steel
International Journal of Hydrogen Energy, 2015
[48] Nanoindentation for investigation of microstructural compositions in SM490 steel weld zone
Journal of Constructional Steel Research, 2015
[49] Characterization of Residual Stress and Plastic Strain in Austenitic Stainless Steel 316L (N) Weldments
2015
[50] Estimation of microstructural compositions in the weld zone of structural steel using nanoindentation
Journal of Constructional Steel Research, Elsevier, 2014
[51] Failure of a Concentric Pipe for a Controllable Pitch Propeller System
Journal of Failure Analysis and Prevention?, 2014
[52] Comparative study and characterization of AISI 1020 steel subjected to three different hardfacing processes
2014
[53] FINITE ELEMENT ANALYSIS OF A WELDING TRANSFORMER
AFL Nogueira - arpapress.com, 2014
[54] X-Ray Analysis of Residual Stress in Weld Region of X70 Pipeline Steel
Advanced Materials Research, 2014
[55] EFFET DE SOUDAGE A L'ARC ELECTRIQUE SUR L'ACIER 0.05% C
E Raouache, Z Boumerzoug, 2014
[56] The face bending behaviour of blind-bolted connections to concrete-filled hollow sections
2014
[57] Effect of Welding Heat on Ferritic Stainless Steel
INTERNATIONAL JOURNAL OF PURE AND APPLIED RESEARCH IN ENGINEERING AND TECHNOLOGY, 2014
[58] ارزيابی پيامدهای بهداشتی مواجهه شغلی جوشکاران صنعت فولاد با پرتوهای ماوراء بنفش‎
ارمغان دانش, 2014
[59] Assessment of health consequences of occupational exposure to ultraviolet radiation in steel industry welders
2014
[60] MULTI-SCALE CHARACTERIZATIONS (SEM/DRX/EBSD) OF ELECTRIC ARC WELDED OF AN INDUSTRIAL LOW CARBON STEEL
2014
[61] ارزیابی پیامدهای بهداشتی مواجهه شغلی جوشکاران صنعت فولاد با پرتوهای ماوراء بنفش‎
2014
[62] EFFECTS OF WELDING PASSES ON PROPERTIES OF FERRITIC STAINLESS STEEL
Engineering Sciences International Research Journal, 2014
[63] Mechanical Properties of Dissimilar Welds between Stainless Steel and Mild Steel
Advanced Materials Research?, 2013
[64] Optimization of Bead Geometry in CO2 Laser Welding of Ti 6Al 4V Using Response Surface Methodology
Engineering, 2011