"Effect of Particulate Reinforcements on the Mechanical Properties of Al6061-WC and Al6061-Gr MMCs"
written by A. R. K. Swamy, A. Ramesha, G.B. Veeresh Kumar, J. N. Prakash,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.10 No.12, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Application of the Full Factorial Design to Modelling of Dual Ceramic Particles (Al2O3/SiCp) Reinforced Aluminium Matrix Composites
Advances in Materials Science and Engineering
[2] INVESTIGATION OF MECHANICAL & METALLURGICAL PROPERTIES OF HYBRID METAL MATRIX COMPOSITES
International Journal of Mechanical and Production Engineering Research and Development, 2019
[3] Prediction of mechanical properties of Al6061 metal matrix composites reinforced with zircon sand and boron carbide
2019
[4] Physical, Mechanical, and Tribological Properties of Al6061-B4C Composites
2019
[5] EFFECT OF DATE SEED PARTICULATES ON MECHANICAL PROPERTIES OF ALUMINIUM ALLOY.
Acta Technica Corvininesis - Bulletin of Engineering, 2018
[6] Aluminium Composites Fabrication Technique and Effect of Improvement in Their Mechanical Properties–A Review
2018
[7] EFFECT OF DATE SEED PARTICULATES ON MECHANICAL PROPERTIES OF ALUMINIUM ALLOY
2018
[8] EDM machinability and parametric optimisation of 2014Al/Al2O3 composite by RSM
2018
[9] Influence of Titanium Diboride and Graphite Reinforcement on Al6061 Alloy
2018
[10] Characterization of pine needle ash particulates reinforced surface composite fabricated by friction stir process
2018
[11] An Investigation On The Mechanical And Tribological Properties Of Alloy A356 On The Addition Of WC
Materials Today: Proceedings, 2018
[12] MECHANICAL AND TRIBOLOGICAL BEHAVIOUR OF STIR CAST ALUMINIUM/BORON CARBIDE/FLY ASH COMPOSITES
2018
[13] A Comparative Study of Mechanical Properties Of As Cast And Heat Treated Al6063-MWCNT Composite Fabricated By Stir Casting Process
IOP Conference Series: Materials Science and Engineering, 2018
[14] Optimization of wear parameters and their relative effects on stir cast AA6063-Si3N4 Composite
Materials Research Express, 2018
[15] Effect of Tungsten Carbide Reinforcement on the Aluminum 6061 Alloy
2018
[16] Processing and characterization of nanoclays reinforced metal (aluminium) matrix composites
2018
[17] A STUDY ON MICROSTRUCTURE AND CHARACTERIZATION OF ALUMINUM 7075 METAL MATRIX REINFORCED WITH SILICON CARBIDE PARTICLES USING STIR CASTING METHOD
International Journal of Research in Engineering and Technology , 2017
[18] Development and Characterization of Al7075 Alloy Reinforced with Tungsten Carbide (WC) and E glass fiber
2017
[19] Investigation of Effect of Stirring Speed on Mechanical and Corrosive Properties of AMMC
2017
[20] Mechanical, electrical, and corrosion behavior of AA6063/TiC composites synthesized via stir casting route
Journal of Materials Research, 2017
[21] Effect of tungsten carbide on mechanical and tribological properties of jute/sisal/E-glass fabrics reinforced natural rubber/epoxy composites
Journal of Industrial Textiles, 2017
[22] تأثير إضافة Graphite/WC على الخواص الفيزيائية والميكانيكية والبلى للألمنيوم‎
2017
[23] Effect of Wetting Agent and Carbide Volume Fraction on the Wear Response of Aluminum Matrix Composites Reinforced by WC Nanoparticles and Aluminide …
2017
[24] Wear testing on heat treated al6061 with reinforcements
International Journal of Intellectual Advancements and Research in Engineering Computations, 2017
[25] Compressive Strength of EN AC-44200 Based Composite Materials Strengthened with α-Al2O3 Particles
Archives of Foundry Engineering, 2017
[26] A study on tensile and tribological properties of aluminum 7075 metal matrix with boron carbide reinforced composite material by using computer interface tensile and …
2017
[27] An Experimental Investigation on mechanical and wear properties of Al7075/SiCp composites: effect of SiC content and particle size
2017
[28] Artificial Neural Networks for the Prediction of Wear Properties of Al6061-TiO2 Composites
IOP Conference Series: Materials Science and Engineering, 2017
[29] Effect of Wetting Agent and Carbide Volume Fraction on the Wear Response of Aluminum Matrix Composites Reinforced by WC Nanoparticles and Aluminide …
Archives of Metallurgy and Materials, 2017
[30] Investigations on mechanical and machinability behavior of aluminum/flyash cenosphere/Gr hybrid composites processed through compocasting
Journal of Applied Research and Technology, 2017
[31] Influence of B 4 C particle reinforcement on mechanical and machining properties of Al6061/B 4 C composites
Composites Part B: Engineering, 2016
[32] INVESTIGATION OF GRAPHITE NANO PARTICLE ADDITION ON THE PHYSICAL AND ME-CHANICAL PROPERTIES OF ZA27 COMPOSITES
2016
[33] Application of the full factorial design to modelling of Al2O3/SiC particle reinforced al-matrix composites
2016
[34] Latest Research Development in Aluminum Matrix with Particulate Reinforcement Composites–A Review
2016
[35] Comparison of Micro Al6061-12% TiB2 with Nano Al6061-12% TiB2 Composite
2016
[36] Effect of Heating Method on Microstructure and Mechanical Properties of Zircon Reinforced Aluminum Composites
2016
[37] Effect of tool material on machinability of TiCp reinforced Al-1100 composite
IOP Conference Series: Materials Science and Engineering, 2016
[38] Effect of granite particulate on Tensile Properties & Hardness of Aluminium 6061 based Metal Matrix Composite
2016
[39] Effect of The Reinforcing by WC on Microhardness, Roughness and Corrosion Behavior of Al-12Si Alloy
2016
[40] Investigation of graphite nano particle addition on the physical and mechanical properties of Za27 composites
2016
[41] Effect of Rice Husk ash and Fly ash Reinforcements on Microstructure and Mechanical properties of Aluminium alloy (AlSi10Mg) Matrix Composites
International Journal of Advanced Science and Technology, 2015
[42] MICRO-COMPUTED TOMOGRAPHY CHARACTERIZATION OF VOLCANIC ASH PARTICLES USED AS REINFORCEMENT IN POLYPHENYLENE SULFIDE COMPOSITES
4th International Conference of Engineering Against Failure, 2015
[43] Effect of particle size and concentration on the mechanical properties of polyester/date palm seed particulate composites
2015
[44] Design and Fabrication of a Stir Casting Furnace Set-Up
2015
[45] A review on the mechanical properties, tribological behavior and the microstructural characterization of Aluminium metal matrix composites (AMMCs).
International Journal of Scientific & Engineering Research, 2015
[46] Evaluation of the Taguchi Method for Wear Behavior of Al6061/Cu-SiC/Cu-Gr Hybrid Composite
Materials Today: Proceedings, 2015
[47] Mechanical and Morphological Studies of Al6061-Gr-SiC Hybrid Metal Matrix Composites
Applied Mechanics and Materials, 2015
[48] A STUDY ON MECHANICAL PROPERTIES OF REINFORCED AL6061 USING REINFORCING MATERIALS OF Al2O3 AND SiC COMPOSITE
Journal of Advanced Manufacturing Technology (JAMT), 2014
[49] Evaluation of mechanical characteristics for Aluminum-copper Metal matrix composite
Research Journal of Engineering Sciences, 2014
[50] An Investigation on the Mechanical Properties of Hybrid Metal Matrix Composites
Procedia Engineering, 2014
[51] Evaluation of aluminium metal matrix composites (AA 6061 and AA 7075) for tribological applications
2014
[52] Studies on mechanical and tribological behaviour of particulate Aluminium metal matrix composites
2014
[53] Mechanical and Wear Behaviour of Aluminium Metal Matrix Hybrid Composites
Procedia Materials Science, 2014
[54] Evaluation of Mechanical Properties of Aluminum Alloy 6061-Glass Particulates reinforced Metal Matrix Composites
MK Yc, U Shankar - academia.edu, 2014
[55] A Comparative Analysis of Transimpedance Amplifier in Giga-bit Optical Communication
Research Journal of Engineering Sciences, 2014
[56] Study of Mechanical Behaviour of Stir Cast Aluminium Based Composite Reinforced with Mechanically Ball Milled TiB2 Nano Particles
Advanced Materials Research, 2014
[57] Comparison of Mechanical Properties and Effect of Sliding Velocity on Wear Properties of Al 6061, Mg 4%, Fly Ash and Al 6061, Mg 4%, Graphite 4%, Fly Ash Hybrid Metal Matrix Composite.
Procedia Materials Science, 2014
[58] Preparation of 6061Al-Al 2 O 3 MMC's by Stir Casting and Evaluation of Mechanical and Wear Properties
Procedia Materials Science, 2014
[59] Studies on effect of heat treatment and water quench age hardening on microstructure, strength, abrasive wear behaviour of Al6061-MWCNT metal matrix composites
2013
[60] Preparation and evaluation of mechanical properties of Al-6061 reinforced with graphite and fly ash of seed husk (Honge) particulate metal matrix composite
2013
[61] Review on Effect of Silicon Carbide (SiC) on Stir Cast Aluminium Metal Matrix Composites
International Journal of Current Engineering and Technology, 2013
[62] INVESTIGATION OF TRIBOLOGICAL BEHAVIOR AND ITS RELATION WITH PROCESSING AND MICROSTRUCTURES OF AL6061 METAL MATRIX COMPOSITES
R SURESH, MP KUMAR - oaji.net, 2013
[63] Individual and Combined Effect of Reinforcements on Stir Cast Aluminium Metal Matrix Composites-A Review
International Journal of Current Engineering and Technology, 2013
[64] Investigation of tribological behavior and its relation with processing and microstructures of Al 6061 metal matrix composites
2013
[65] PREPARATION AND EVALUATION OF MECHANICAL AND WEAR PROPERTIES OF Al6061 REINFORCED WITH GRAPHITE AND SiC PARTICULATE METAL MATRIX COMPOSITES
International Journal of Mechanical Engineering and Robotics Research India, 2012
[66] Simulation on Mechanical Properties of Tungsten Carbide Thin Films Using Monte Carlo Model
Tecno Lógicas, 2012
[67] Preparation and evaluation of mechanical and wear properties of 6061Al reinforced with graphite particulate metal matrix composite
M NAGARAL, V AURADI - Materials Science and Engineering (IJMMSE), 2012
[68] Simulación de propiedades mecánicas de películas delgadas de carburo de tungsteno a partir del Modelo Monte Carlo
Tecno Lógicas, 2012