has been cited by the following article(s):
|
[1]
|
Review of the Applications, Properties and Processing Parameters of Dual Phase Steels
|
|
2021 |
|
|
|
|
[2]
|
Microstructure authentication on mechanical property of medium carbon Low alloy duplex steels
|
|
2020 |
|
|
|
|
[3]
|
A QUENCHING MEDIA EFFECT ON THE MECHANICAL PROPERTIES OF MEDIUM CARBON DUAL PHASE STEEL
|
|
2020 |
|
|
|
|
[4]
|
Effect of martensite volume fraction on the mechanical behavior of an UNS S41003 dual-phase stainless steel
|
|
2020 |
|
|
|
|
[5]
|
Mechanical and microstructural evaluation of dual phase steel, quenched in bitumen and water at an intercritical temperature: effect of holding time
|
|
2019 |
|
|
|
|
[6]
|
The role of fibrous morphology on the Charpy impact properties of low carbon ferrite-bainite dual phase steel
|
|
Materials Science and Engineering: A,
2018 |
|
|
|
|
[7]
|
Effect of steel structure and defects on reliability of parts of impact mechanisms
|
|
IOP Conference Series: Earth and Environmental Science,
2018 |
|
|
|
|
[8]
|
AFECTACIÓN TÉRMICA DE LA MICROESTRUCTURA DE LOS ACEROS DE DOBLE FASE SOLDADOS CON LÁSER
|
|
2018 |
|
|
|
|
[9]
|
Effect of preheat treatment structure on mechanical characterization of AISI 4340 ferrite bainite dual phase steel
|
|
2018 |
|
|
|
|
[10]
|
Effect of Intermediate Quenching and Tempering on the Mechanical Behaviour of Low Carbon Steel
|
|
International Journal of Advanced Engineering Research and Science (IJAERS),
2017 |
|
|
|
|
[11]
|
Mechanical properties of bitumen quenched dual phase steel
|
|
2017 |
|
|
|
|
[12]
|
Mechanical Properties of Bitumen Quenched Dual Phase Steel (Sifat Mekanik Bitumen Lindap Keluli Dual Fasa)
|
|
2017 |
|
|
|
|
[13]
|
A Study on the Tensile Test Properties of Medium Carbon Steel Specimens Under Specific Manufacturing Conditions
|
|
2016 |
|
|
|
|
[14]
|
Fractographic Analysis of Tensile Failure in Dual Phase Medium Carbon Low Alloy Steels
|
|
Journal of Physical Science,
2016 |
|
|
|
|
[15]
|
COMPARISON OF MECHANICAL PROPERTIES OF MEDIUM CARBON STEEL WITH DUAL PHASE STEEL
|
|
2015 |
|
|
|
|
[16]
|
INFLUENCE OF INTERCRITICAL ANNEALING TEMPERATURE ON MECHANICAL PROPERTIES AND MICROSTRUCTURE OF 0.23% C LOW ALLOY STEEL
|
|
Nigerian Journal of Technology (NIJOTECH),
2015 |
|
|
|
|
[17]
|
Effect of tempering on the microstructure and mechanical properties of austenitic dual phase steel
|
|
International Journal of Physical Sciences,
2015 |
|
|
|
|
[18]
|
TENSILE PROPERTIES OF PRE-HEATED BITUMEN QUENCHED DUAL PHASE MEDIUM CARBON STEEL
|
|
UNILAG JOURNAL OF MEDICINE, SCIENCE AND TECHNOLOGY,
2015 |
|
|
|
|
[19]
|
Influence of different cyclic intercritical heat treatment schedules on the microstructure and mechanical behaviour of a medium carbon low alloy steel
|
|
Metallurgical and Materials Engineering,
2013 |
|
|
|
|
[20]
|
Influence of different cyclic intercritical heattreatment schedules on the microstructure and mechanical behaviour of a dual phase medium carbon low alloy steel
|
|
Metallurgical and Materials Engineering,
2013 |
|
|
|
|
[21]
|
Fracture Toughness (K1C) evaluation for dual phase medium carbon low alloy steels using circumferential notched tensile (CNT) specimens
|
|
Materials Research,
2011 |
|
|
|
|
[1]
|
Investigation on the effect of machining parameters on 42CrMo4 DPS steels
Cogent Engineering,
2023
DOI:10.1080/23311916.2022.2162954
|
|
|
|
|
[2]
|
Mechanical and microstructural evaluation of dual phase steel, quenched in bitumen and water at an intercritical temperature: effect of holding time
Materials Research Express,
2019
DOI:10.1088/2053-1591/ab4747
|
|
|
|
|
[3]
|
Effect of steel structure and defects on reliability of parts of impact mechanisms
IOP Conference Series: Earth and Environmental Science,
2018
DOI:10.1088/1755-1315/134/1/012045
|
|
|
|
|
[4]
|
Fracture Toughness (K1C) evaluation for dual phase medium carbon low alloy steels using circumferential notched tensile (CNT) specimens
Materials Research,
2011
DOI:10.1590/S1516-14392011005000028
|
|
|
|