Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"Mechanical Properties of Epoxy Resin – Fly Ash Composite"
written by Manoj Singla, Vikas Chawla,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.3, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Performance for Fly Ash Reinforced HDPE Composites over the Ageing of Material Components
Polymers, 2022
[2] Influence of fillers on epoxy resins properties: a review
Journal of Materials …, 2022
[3] Valorization of MSW Incinerator Fly Ash for Epoxy-Based Composite for Interior Light Partition Application
Waste and Biomass …, 2022
[4] Electrical behavior of working electrodes derived from Fly ash enriched epoxy
Materials Today: Proceedings, 2022
[5] Chemical modification of epoxy prepolymers as anticorrosive materials: a review
Environmentally Sustainable …, 2022
[6] Comparative thermal analysis of coal fuels, biomass, fly ash and polyamide
Kleczkowska, M Szumera, A Gnatowski… - Energy, 2022
[7] Investigations on Tensile and Flexural Behaviours of Fly Ash/Coir Reinforced Polymer Matrix Composites
Brazilian Archives of …, 2022
[8] Plant waste reinforced epoxy composite: A short review on tensile and flexural strength
AIP Conference Proceedings, 2022
[9] ABS-Fly Ash Composite Filaments for Fused Deposition Modeling
Recent Advances in …, 2022
[10] Design and Analysis of Multi-Layered Composite Panels for In-Plane Loadings
Materials Science …, 2022
[11] The effects of salt concentration on the impact strength of composite material
AIP Conference …, 2022
[12] Fly Ash Epoxy Composites with Superior Fire Retardant Properties
Advanced Materials …, 2022
[13] The Effect of Barite Addition and Graphite Particle Size on The Specific Abrasion of Fly-Ash/Phenolic Composite for Brake Lining Application
… of Engineering and …, 2022
[14] Tribological Behavior of Coconut Shell-Fly Ash-Epoxy Hybrid Composites: An Investigation
… and Applications for …, 2022
[15] ANALISIS KUAT TEKAN, KEKAKUAN (STIFFNESS) DAN KEULETAN (TOUGHNESS) BETON RINGAN MENGGUNAKAN AGREGAT RINGAN
2022
[16] STRUCTURAL ANALYSIS AND MECHANICAL PROPERTIES OF LIGNITE FLY-ASH/HOLLOW GLASS MICROSPHERE/ACACIA NILOTICA INCORPORATED …
2021
[17] Effect of fly ash content and particle size on mechanical properties of polyester-based composites
International Journal of Engineering …, 2021
[18] Epoxy resins and their nanocomposites as anticorrosive materials
Organic corrosion …, 2021
[19] Investigation of the properties of composite materials based on epoxy resins with microsilica additives
Kompleksnoe …, 2021
[20] Impact of Water Particles on Fly Ash–Filled E-Glass Fiber–Reinforced Epoxy Composites
Advanced Materials and …, 2021
[21] Effect of Fly Ash content and particle size on physical properties of polyester-based composites
Int J Eng Res Current Trends (IJERCT), 2021
[22] TENSILE BEHAVIOUR OF SUGARCANE FIBRE/FLY ASH/CARBON NANO TUBES REINFORCED EPOXY COMPOSITES
U.P.B. Sci. Bull., 2021
[23] Permeability Investigation Using Self-healing Material: Case Study of Cement Filled with Encapsulated Epoxy and Amine Derivatives
2021
[24] Simulation of the thermal degradation and curing kinetics Of fly ash reinforced Diglycidyl ether bisphenol A composite
2021
[25] Mechanical Characterization of a Fly Ash and Glass Fibers Reinforced Hybrid Epoxy Composite
Advances in Engineering Materials, 2021
[26] Flexural Analysis of Epoxy Polymer Composite Reinforced With Sugarcane Fibre/Fly Ash/Carbon-Nanotube
2021
[27] Tribological Properties of Fly Ash Blended Polymer Composites
2021
[28] Tannin based polyphenolic bio-macromolecules: Creating a new era towards sustainable flame retardancy of polymers
2021
[29] Industrial waste filled polymer composites–A review
2021
[30] Investigation of thermo-mechanical characteristics of borax reinforced polyester composites
Journal of Building …, 2021
[31] Determination of the optical constants, nonlinear optical parameters and threshold limiting of methyl red-epoxy resin film
Physica B: Condensed …, 2021
[32] Modified Epoxy for Fibre Reinforced Polymer Strengthening of Concrete Structures
2020
[33] Influence of an electrically conductive constituent on mechanical properties of carbon black filled polymers under compressive deformation
2020
[34] Characterization of Chemical-Treated and Gamma Irradiated Pineapple Leaf Fabric/Epoxy Composites: Surface Structure and Physico-Mechanical Properties
2020
[35] ASSESSING SOUND-MUFFLING CHARACTERISTICS OF FLY-ASH NANO-PARTICLE REINFORCED EPOXY RESIN COMPOSITES
Eski?ehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering, 2020
[36] Investigation of Mechanical Properties of Coconut Shell Dust, Epoxy and Fly-Ash Composites.
2020
[37] Development and Characterization of Fly Ash Nanoparticles Reinforced Epoxy Resin Composite for Acoustic Applications
2020
[38] Performance of Modified Mortar Containing Epoxy
2020
[39] Epoxy/fly ash from thermal power plant/nanofiller nanocomposite: studies on mechanical and thermal properties: a review
2020
[40] Mechanical behavior on tamarind & dates seeds powder, prawn shells powder with Arundo donax L. Leaf reinforced epoxy composite
2020
[41] Multilayer Coatings Using Epoxy and Superabsorbent Polymer Composite Material with Self Healing Property
2020
[42] Analytical Approach in Materials Selection of Natural Fibre Reinforced Polymer Composites for Car Door Handle
2020
[43] Characterization and utilization of coal fly ash: a review
2020
[44] Epoxy resins as anticorrosive polymeric materials: A review
2020
[45] Gama Işını ve Kimyasal İşlem Uygulanmış Ananas Liflerinden Üretilen Kumaş/Epoksi Kompozitlerin Karakterizayonu: Yüzey Yapısı ve Fiziko-Mekanik Özellikleri
2020
[46] Effects of the Amount of Fly Ash Modified by Stearic Acid Compound on Mechanical Properties, Flame Retardant Ability, and Structure of the Composites
2020
[47] Characterization of Wear and Physical Properties of Pawpaw–Glass Fiber Hybrid Reinforced Epoxy Composites for Structural Application
2020
[48] Comparative Study of Fly Ash/Sugarcane Fiber Reinforced Polymer Composites Properties
2020
[49] Effect of production temperature on thermal and mechanical properties of polystyrene–fly ash composites
2020
[50] Epoxy/Fly ash from Indian soil Chulha/nano CaCO3 nanocomposite: Studies on mechanical and thermal properties
2020
[51] Synergistic influence of CaCO3 nanoparticle on the mechanical and thermal of fly ash reinforced epoxy polymer composites
2020
[52] STUDIES ON MECHANICAL AND THERMAL PROPERTIES OF EPOXY/FLY ASH/NANOFILLER NANOCOMPOSITE: A REVIEW
2020
[53] Determination of Fatigue Limit of Coir/CNT/Fly Ash Reinforced Epoxy Polymer Matrix Composite
2020
[54] Study on Synergies of Fly Ash with Multiwall Carbon Nanotubes in Manufacturing Fire Retardant Epoxy Nanocomposite
2020
[55] Effects of Aluminium Dross and Iron Filings Particulates on the Mechanical Properties of Hybrid Thermoplastic (Nylon) Matrix Composites
2019
[56] To refinement of the estimation of the electrical conductivity of filled polymers from texture pattern of the macrostructure image
2019
[57] AJ Csian OURNALOF HEMISTRY AJ Csian OURNALOF HEMISTRY
2019
[58] Effect of environmental aging conditions on the properties of fly ash filled epoxy composites
2019
[59] Feasibility Study of Fly Ash as Filler in Banana Fiber-Reinforced Hybrid Composites
2019
[60] Eco-friendly flame retardant additives for epoxy resin nanocomposites
2019
[61] Effect of Alkaline Treatment on Mechanical and Thermal Properties of Coconut Shell Particulates Reinforced Epoxy Composite
2019
[62] магистр кафедры инновационных материалов и защиты от коррозии Российский химико-технологический университет им. ДИ Менделеева (Россия, г …
2019
[63] Unsaturated polyester resin concrete: A review
2019
[64] Influence of curing condition on thermo-mechanical properties of fly ash reinforced epoxy composite
2019
[65] Effect of Silicon Coupling Grafted Ferric Oxide and E-Glass Fibre in Thermal Stability, Wear and Tensile Fatigue Behaviour of Epoxy Hybrid Composite
Silicon, 2019
[66] Enhancing Mechanical Properties of E-glass/Epoxy and Bagasse fiber/Epoxy Composites with Fly ash Filler
2019
[67] Computational modeling for cure process of carbon epoxy composite block
2019
[68] Mechanical and Three-body abrasive wear behaviour of Nano-Flyash/ZrO
Inernational Journal of Science Research, 2019
[69] Effect of Industrial Waste on Chemical and Water Absorption of Bamboo Fiber Reinforced Composites
2019
[70] Study on Fire Resistance Ability and Mechanical Properties of Composites Based on Epikote 240 Epoxy Resin and Thermoelectric Fly Ash: An Ecofriendly Additive
2019
[71] PENGARUH ARAH SERAT IJUK TERHADAP KEKUATAN TARIK DAN BENDING MATERIAL KOMPOSIT SERAT IJUK-EPOXY
2019
[72] Prevention of Environmental Degradation of Epoxy Resins Modified with the Addition of Different Fillers
2019
[73] Analisis Pengaruh Perlakuan Alkali Terhadap Kekuatan Sagging Plafon Komposit Serat Rumput Payung (Cyperus Alternifolius) Dengan Matrix Epoxy
2019
[74] Bor minerali atığı katkılı polipropilen kompozit malzemelerin mekanik ve tribolojik özelliklerinin incelenmesi
2018
[75] Experimental Investigation of Mechanical Properties of Reinforced Composite Using Titanium Alloy Powder
2018
[76] Nanoparçacık katkılı epoksi esaslı yapıştırıcıların mekanik ve termal özelliklerinin araştırılması
2018
[77] Surface activation of the reinforcing filler and polymer matrix modification as efficient ways to upgrade properties of polymer-matrix composites based on …
2018
[78] Studi Karakteristik Komposit Balistik Berbahan Filler Serat Rami Dan Serat Abaka Dengan Matriks Resin Epoksi
2018
[79] Nanoparçacık katkılı Epoksi esaslı Yapıştırıcıların Mekanik Ve Termal Ozelliklerinin Araştırılması
2018
[80] Characterization of graphene epoxy nanocomposite interface region by multiscale modelling
2018
[81] Mechanical Properties of Epoxy/Fly ash Composites
2018
[82] Estudo da resistência mecânica e análise térmica da resina epóxi
2018
[83] Estimation of the behavior of filled polymers in aggressive media based on the Minkovski dimension
2018
[84] Pengaruh Fraksi Massa Filler Terhadap Tensile dan Impact pada Komposit Partikel Abu Batubara Dengan Matrik Polyvinyl Chloride Grade K-65R
2018
[85] Enforcement of Epoxy with Silica Fume and Carbon Fiber
Tikrit Journal of Engineering Sciences, 2018
[86] An experimental investigation on mechanical properties of SiC particle and sisal fibre reinforced epoxy matrix composites
IOP Conference Series: Materials Science and Engineering, 2018
[87] filled E-glass fiberefly ash hybrid
2018
[88] Monitoring the long-term durability and microstructure of polymer concrete patching materials with high content of secondary raw materials using advanced methods
IOP Conference Series: Materials Science and Engineering, 2018
[89] Three point bending of hand laminated fiber composites
Composites Theory and Practice, 2018
[90] Mechanical Properties of Gamma-Irradiated Natural Fiber Reinforced Composites
2018
[91] SURFACE ACTIVATION OF THE REINFORCING FILLER AND POLYMER MATRIX MODIFICATION AS EFFICIENT WAYS TO UPGRADE PROPERTIES OF …
2018
[92] Photoresist: Fabrication, Characterization and Its Sensitivity on the Exposures of X-Ray and Ultraviolet
IOP Conference Series: Materials Science and Engineering, 2018
[93] Development of E-Glass Woven Fabric/Polyester Resin Polymer Matrix Composite and Study of Mechanical Properties
Materials Today: Proceedings, 2018
[94] Synthesis and Characterization of Epoxy based Hybrid Composite Reinforced with Glass Fiber and Milled Carbon
Materials Today: Proceedings, 2018
[95] Mechanical and Tribological Wear Behavior of Epoxy Hybrid Composites
Materials Today: Proceedings, 2018
[96] Synthesis and characterization of hybrid polypropylene matrix composites reinforced with carbonized Terminalia catappa shell particles and Turritela communis shell …
Journal of Taibah University for Science, 2018
[97] Design of Epoxy based Resin Composites for Automotive Applications: A Case Study on IC Engine Valve Guide
Journal of The Institution of Engineers (India): Series C, 2018
[98] Investigation on Mechanical and Physical Properties of Fly Ash Reinforced Epoxy Resin Composite
IOSR Journal of Mechanical and Civil Engineering, 2018
[99] PENGARUH FRAKSI MASSA FILLER TERHADAP TENSILE DAN IMPACT PADA KOMPOSIT PARTIKEL ABU BATUBARA DENGAN MATRIK POLYVINYL CHLORIDE …
2018
[100] Influence of surface-modified South African coal fly ash on the mechanical properties of cis-1 4-polyisoprene rubber vulcanizates
2018
[101] Analysis of Mechanical Properties of Polymer Based Nano Fly Ash
2018
[102] Tribological Behavior of Coconut Shell–Fly Ash–Epoxy Hybrid Composites: Investigation
2018
[103] Study on mechanical properties of glass wool/epoxy reinforced composite
International Journal of Computer Aided Engineering and Technology, 2018
[104] Mechanical and thermal properties of coal gasification fine slag reinforced low density polyethylene composites
Journal of Applied Polymer Science, 2018
[105] Effect of NaOH soaking time on kenaf/glass fiber hybrid epoxy composites
AIP Conference Proceedings, 2017
[106] A Brief Review on Fly Ash Utilization
2017
[107] Odun Külü ve Mikrokristalin Selüloz İle Doldurulmuş Poliester Kompozitler
Kastamonu University Journal of Forestry Faculty, 2017
[108] Mechanical Properties of Cocconut Shell Dust, Epoxy-Fly Ash Hybrid Composites
American Journal of Engineering Research, 2017
[109] Experimental Correlation between Varying Cassava Cortex and Dielectric Properties in Epoxy/Cassava Cortex Dielectric Particulates Composites
Particulate Science And Technology, 2017
[110] Microstructure and Mechanical properties of Epoxy–Rice Husk Ash Composite
2017
[111] FABRICATION AND CHARECTERIZATION OF MULTILAYER GFRP COMPOSITES WITH DIFFERENT ORIENTATIONS
2017
[112] A review on application of structural adhesives in concrete and steel–concrete composite and factors influencing the performance of composite connections
International Journal of Adhesion and Adhesives, 2017
[113] High-performance SPEEK/SWCNT/fly ash polymer electrolyte nanocomposite membranes for fuel cell applications
2017
[114] Influence of MWCNTs addition on mechanical and thermal behaviour of epoxy/kenaf multi-scale nanocomposite
IOP Conference Series: Materials Science and Engineering, 2017
[115] POTENSI NANOSISAL SEBAGAI FILLER PADA MATERIAL TUMPATAN (TAMBALAN GIGI) RESIN KOMPOSIT
2017
[116] Composites based on high-molecular weigh epoxy resin modified with polysulfide rubber
Composites Theory and Practice, 2017
[117] Usage of industrial wastes as particulate composite for environment management: Hardness, Tensile and Impact studies
Journal of Environmental Chemical Engineering, 2017
[118] Modal Stress Analysis of Bottom Ash/Epoxy Composites
2017
[119] Effect of Surfactants on the Rheological Properties and Microstructure of MWCNT/Epoxy Resin Suspensions
2017
[120] PHOTORESIST: FABRIKASI, KARAKTERISASI DAN SENSITIVITASNYA PAPARAN SINAR ULTRAVIOLET DAN SINAR-X
2017
[121] Preparation Nano Composite Material Used in Oil and Gas Pipelines
Engineering and Technology Journal, 2017
[122] MACHINABILITY ANALYSIS OF DRILLINGINDUCED DAMAGE ON FIBRE-REINFORCED POLYMER COMPOSITES
Thesis, 2017
[123] ENHANCED MECHANICAL PROPERTIES OF EPOXY/GRAPHITE COMPOSITES
2017
[124] A review of the structure–property research on hybrid-reinforced polymer composites
Hybrid Polymer Composite Materials, Volume 1, 2017
[125] FRICTION AND WEAR PERFORMANCE OF CENOSPHERE FILLED CARBON-EPOXY COMPOSITES UNDER DRY AND WATER LUBRICATED CONDITIONS: A …
Journal of Manufacturing Technology Research, 2017
[126] CARACTERIZAREA TRIBOLOGICĂ A MODIFICĂRILOR DE SUPRAFAŢĂ DUPĂ TRATAMENTE TERMICE APLICATE COMPOZITELOR HEMATIT-EPOXIDICE
Revista Romana de Materiale, 2017
[127] Study the Effect of Different Reinforcements on the Damping Properties of the Polymer Matrix Composite
2017
[128] Special features of large-size resistors for high-voltage pulsed installations
AIP Conference Proceedings, 2017
[129] Wood ash and microcrystalline cellulose (MCC) filled unsaturated polyester composites
2017
[130] Mechanical properties of coconut shell dust, epoxy-fly ash hybrid composite
2017
[131] Investigation of the mechanical performance of metal-composite joints
2017
[132] Tensile properties of composite laminates due to fuel attack
2017
[133] Developing Short Milled Carbon Fibre Modified Toughened Epoxy Matrix for Superior and Inexpensive infrastructural CFRP Laminates
2016
[134] Modification of Epoxy Resin with Silicone Rubber and In-situ Generated Alumina Silicates.
Journal of Polymer Materials, 2016
[135] Deformación y fractura de una resina epóxica reforzada con fibras de algodón
2016
[136] Fabrication and testing of PVC composites with flyash and mica as hybrid reinforcements
2016
[137] Effect of various fillers on mechanical properties of Glass Fibre Reinforced Polymer Composites: A review
2016
[138] Development and Comparison of Mechanical Properties of Uni-Directional E-Glass/Epoxy Composite with Coal Ash as Filler
2016
[139] Fabrication and Surface Characterization of Spherical Fly Ash Particle–Reinforced Epoxy Resin
2016
[140] General model for comparative tensile mechanical properties of composites fabricated from fly ash and virgin/recycled high‐density polyethylene
Polymer Engineering & Science, 2016
[141] CHARACTERIZATION OF SHORT E-GLASS FIBER REINFORCEDGRAPHITE AND BRONZE FILLED EPOXY MATRIX COMPOSITES
2016
[142] Study of Mechanical properties & chemical testing of Glass/Epoxy composite-a Review
South - Asian Journal of Multidisciplinary Studies (SAJMS), 2016
[143] Epoxy resin characterization for imaging phantom: X-ray, textural, and mechanical properties
2016
[144] Two-Step Procedure of Fly Ash Modification as an Alternative Method for Creation of Functional Composite
Journal of Polymers and the Environment, 2016
[145] Fabrication and characterization of masterbatches made from poly (vinyl chloride) and modified fly ash
2016
[146] Modification of Epoxy Resin with Silicone Rubber and In-situ Generated Alumina Silicates
Journal of Polymer Materials, 2016
[147] The Impact of Crude Oil Contaminated Natural Sand on Polymer Concrete
2016
[148] An Investigation into the Influence of Filler Silanization Conditions on Mechanical and Thermal Parameters of Epoxy Resin-Fly Ash Composites
Journal of Polymers and the Environment, 2016
[149] Effect of Fly-Ash on Thermal & Mechanical Properties of Polystyrene Fly-Ash Composites
IJSRD -International Journal for Scientific Research & Development, 2016
[150] Effect of Various Fillers on Mechanical Properties of Glass Fiber Reinforced Polymer Composites: A Review
International Journal of Emerging Trends in Science and Technology, 2016
[151] Development of Wood-Ash/Resin Polymer Matrix Composite for Body Armour Application
2016
[152] Improvements in fatigue life of amine-functionalized multi-walled carbon nanotube-reinforced epoxy composites: Effect of functionalization degree and microwave …
Journal of Composite Materials, 2015
[153] Tensile and Compressive Properties of Kaolin Rienforced Epoxy
Al-Khwarizmi Engineering Journal, 2015
[154] PENGARUH KOMPOSISI DAN UKURAN SERBUK KULIT KERANG DARAH (ANADORA GRANOSA) TERHADAP KEKUATAN TARIK DAN KEKUATAN BENTUR …
2015
[155] A Review on Potential of Development New Weave Pattern Design using Glass Fiber and Kenaf Fiber for Intraply Composite
2015
[156] Improvements in fatigue life of amine-functionalized multi-walled carbon nanotube-reinforced epoxy composites: Effect of functionalization degree and microwave-assisted precuring
Journal of Composite Materials, 2015
[157] Evaluation of Oil Fly Ash as a Light Stabilizer for Epoxy Composites: Accelerated Weathering Study
Polymer Degradation and Stability, 2015
[158] FABRICATION AND EVALUATION OF MECHANICAL PROPERTIES OF FE2O3 PARTICULATE FILLED HYBRID COMPOSITES
Journal of The International Association of Advanced Technology and Science, 2015
[159] Electrical and di electrical properties of carbon reinforced epoxy composites with different types of carbon reinforcements
2015
[160] Effect of Graphite and Bronze on Strength of Chopped E-Glass Fiber Reinforced Epoxy Composites
American Journal of Materials Science, 2015
[161] Micro-Damage Initiation and Evolution in GF/EP Cross-Ply Laminates
2015
[162] Advances in Industrial Prospective of Cellulosic Macromolecules Enriched Banana biofibre resources: A Review
International journal of biological macromolecules, 2015
[163] Use of Secondary Ion Mass Spectrometry (SIMS) to identify fly ash mineral spatial and particulate distribution in epoxy polymer
International Journal of Mineral Processing, 2015
[164] Studies on Physical and Mechanical Properties of Silica Fume-Filled Nylon 66 Polymer Composites for Mechanical Components
Polymers & Polymer Composites, 2015
[165] Experimental Analysis Of Mechanical Properties Of Alkaline Treated Coconut Shell Powder-Polymer Matrix Composites
Int. J. Adv. Eng, 2015
[166] Physical and Mechanical Properties of Polymer Composites with High Content of Wastes Including Boron
Materials Research, 2015
[167] Surface treated fly ash filled modified epoxy composites
Polímeros, 2015
[168] Preparasi dan Karakterisasi Komposit Resin Dgeba (Diglycidyl Ether of Bisphenol A) Secara In-Situ dengan Pengisi Serat Sabut Kelapa
2015
[169] PENGARUH KOMPOSISI DAN UKURAN SERBUK KULIT KERANG DARAH (ANADORA GRANOSA) TERHADAP KEKUATAN TARIK DAN KEKUATAN BENTUR …
2015
[170] EVALUATING THE INFLUENCE OF FIBER ORIENTATION AND FILLER CONTENT ON TENSILE, HARDNESS, AND IMPACT STRENGTH OF HYBRID …
2015
[171] Effects of Polyaniline Filler on the Shear Strength of Silver-Polyaniline-Epoxy Adhesive
2015
[172] EVALUATING THE INFLUENCE OF FIBER ORIENTATION AND FILLER CONTENT ON TENSILE, HARDNESS, AND IMPACT STRENGTH OF HYBRID LAMINATED COMPOSITES
INTERNATIONAL JOURNAL OF RESEARCH IN AERONAUTICAL AND MECHANICAL ENGINEERING, 2015
[173] Fabrication & Wear Analysis of GFRP Composite Using DOE
2015
[174] STUDY OF MECHANICAL PROPERTIES OF GLASS FIBRE REINFORCED EPOXY COMPOSITE
2015
[175] PENGARUH KOMPOSISI DAN UKURAN SERBUK KULIT KERANG DARAH (ANADORA GRANOSA) TERHADAP KEKUATAN TARIK DAN KEKUATAN …
2015
[176] Epoxy/oil fly ash composites prepared through in situ polymerization: Enhancement of thermal and mechanical properties
Polymer Composites, 2014
[177] Polymer Blended (Epoxy/Vinylester) Nanocomposites Resistance against Pulling & Sliding Wear Loads
International Letters of Chemistry, Physics and Astronomy, 2014
[178] TENSILE AND FLEXURAL STRENGTH OF GLASS FIBER EPOXY COMPOSITES
International Conference on Advanced Materials and manufacturing Technologies (AMMT), 2014
[179] Analysis of Mechanical Properties of Glass/Orthophthalic Polyster Resin with Hematite Ore Filled Composites
International Journal of Research, 2014
[180] Improvement of Impact Absorbed Energy of CFRPs on Adding the Nanoparticles into Epoxy Resins
J. Chem, 2014
[181] Effect of Particle Loading, Temperature and Surface Treatment on Moisture Absorption of CFB Fly Ash Reinforced Thermoset Composite
SE Onishi - ijcea.org, 2014
[182] MECHANICAL PROPERTIES OF MICRO TUNGSTEN DISULPHIDE PARTICLES FILLED EPOXY COMPOSITE AND ITS RESISTANCE AGAINST SLIDING WEAR
Malaysian Polymer Journal, 2014
[183] Frictional characterization of teak wood dust-filled epoxy composites
Advances in Production Engineering & Management, 2014
[184] Evaluation of Mechanical Properties and Morphological Studies of Bagasse Fibre (Chemically Treated/Untreated)-CaCO3 Epoxy Hybrid Composites
Journal of The Institution of Engineers (India): Series D, 2014
[185] Structural and Mechanical Characterization of Sustainable Composites Based on Recycled and Stabilized Fly Ash
Materials, 2014
[186] Development of a novel hybrid polymer composite with coir dust and fly ash reinforcements and investigation of its dielectric nature
S Tripathy - nhsjs.com, 2014
[187] DEVELOPMENT AND EVALUATION OF MECHANICAL PROPERTIES ASBESTOS FILLED E-GLASS/EPOXY COMPOSITES
2014
[188] Mechanical strength of unsaturated polyester resin filled with CFB fly ash and lignocellulosic waste
2014
[189] Evaluation of mechanical properties and morphological studies of bagasse fibre (chemically treated/untreated)-CaCO 3 epoxy hybrid composites
2014
[190] Effect of fly ash on thermal stability, flammability, oil resistance and transport properties of chlorinated styrene butadiene rubber composites
Journal of Elastomers and Plastics, 2013
[191] Mechanical and Three-body abrasive wear behaviour of Nano-Flyash/ZrO2 filled Polyimide Composites
International Journal of Science Research, 2013
[192] Effect of Hematite Filler Material on Mechanical Properties of Glass/Epoxy Composites
MN Channapagoudra, AG Joshi, S Thaned, M Patil - ijirset.com, 2013
[193] Tensile Properties of Long Untreated and Alkali Treated Napier Grass Fiber Strands/Epoxy Composites
VP Kommula, OR Kanchireddy, M Shukla, T Marwala - psrcentre.org, 2013
[194] Desenvolvimento e automação de um sistema de encapsulamento de OLEDs
2013
[195] PENGARUH UKURAN BUTIR SERBUK FLY ASH TERHADAP KEKUATAN IMPACT BAHAN KOMPOSIT BERMATRIKS EPOXY
Jurnal Ilmiah Teknik Mesin, 2013
[196] Pengaruh Fraksi Volume Serat Pelepah Gebang (Corypha Utan Lamarck) Terhadap Sifat Mekanik Pada Komposit Bermatrik Epoksi
Rekayasa Mesin, 2013
[197] Strength Characterization of E-glass Fiber Reinforced Epoxy Composites with Filler Materials
Journal of Minerals and Materials Characterization and Engineering, 2013
[198] Advanced Materials Manufacturing & Characterization
G Rajesh, AVR Prasad - ijammc-griet.com, 2013
[199] Influence of wood ash on the mechanical properties of polymer matrix composite developed from fibre glass and epoxy resin
2013
[200] Strength and corrosion testing of jute/glass-epoxy hybrid composite laminates
2013
[201] Characterization of woven fabric composites
2012
[202] Ultrasonically assisted drilling of carbon fibre reinforced plastics
Solid State Phenomena, 2012
[203] HARDNESS AND MORPHOLOGICAL STUDY OF FLY ASH-BAGASSE COMPOSITES
PC Gope, V Deepak, RK Sharma, MK Maheshwari - euroasiapub.org, 2012
[204] Tensile Properties of Iron Ore Tailings Filled Epoxy Composites
SM Adedayoa, MA Onitirib - uwi.tt, 2012
[205] Evaluation of Flexural Properties of Fly Ash Filled Polypropylene Composites
J Gummadi, GV Kumar, G Rajesh - ijmer.com, 2012
[206] Effects of Caeser weed (Urena lobata L) fibre, Afara (Terminalia superba) and Mahogany (khaya senegalensis) dusts on some Physical and Mechanical properties of Epoxy resin
International Journal of Engineering Research in Africa, 2012
[207] New materials from maleated castor oil/epoxy resin blend reinforced with fly ash
Industrial & Engineering Chemistry Research, 2012
[208] Mechanical properties and morphological study of fly-ash–bagasse composites
Journal of The Institution of Engineers (India): Series D, 2012
[209] Effective Utilization of Industrial Waste (Flyash) to Enhance the Properties of Polymer Composites for Mechanical Components
Journal of Industrial Pollution Control, 2012
[210] دراسة تاثير بعض المساحيق البوليمرية عاى السلوك الميكانيكي للايبوكسي‎
2012
[211] Effects of Caeser weed (Urena lobata L) fibre, Afara (Terminalia superba) and Mahogany (khaya senegalensis) dusts on some Physical and Mechanical properties of …
International Journal of Engineering Research in Africa, 2012
[212] Mechanical properties of composite materials based on epoxy resin reinforced low carbon steel
Iraqi journal of mechanical and material engineering, 2011
[213] INFLUENCE OF HEMATITE FILLER ON MECHANICAL BEHAVIOR OF GLASS/EPOXY COMPOSITES
2010
[214] Deformación y fractura de una resina epóxica reforzada con fibra de algodón
[215] Effects of Particle Size and Particle Loading on the Tensile Properties of Iron-Ore-Tailing-Filled Epoxy and Polypropylene Composites
Mechanics of Composite Materials
[216] Development of Epoxy Based Composites Filled With Boron Carbide (B4C), Tungsten Disulphide (WS2) and Evaluation of its Mechanical Properties
International Journal of Mechanical Engineering and Research [IJMER]
[217] Mechanical Properties of Geopolymer Filler in Polymer Composites
[218] Partikül dolgulu fiber takviyeli polimer esaslı kompozit malzemelerin düşük hızlı darbe davranışlarının incelenmesi
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top