"Effect of Precipitation Hardening on Hardness and Microstructure of Austenitic Manganese Steel"
written by S. Aribo, K.K. Alaneme, D.O. Folorunso, F.O. Aramide,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.9 No.2, 2010
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Study on the effect of solution treatment soaking time on structure development of modified FeNiMn steels
2020
[2] Compression Deformation Behavior of a Fe–26Mn–7Al–1.3 C Austenitic Steel after Precipitation‐Hardened Treatment
2019
[3] Determinación de las variaciones físicas metalúrgicas de los martillos de la trituradora de mineral laterítico
2019
[4] The Effect of Heat Treatment Process Parameters on Mechanical Properties, Precipitation, Fatigue Life, and Fracture Mode of an Austenitic Mn Hadfield Steel
Journal of Materials Engineering and Performance, 2018
[5] The effect of solid solution treatment on the hardness and microstructure of 0.6%. wt C-10.8%. wt Mn-1.44%. wt Cr austenitic manganese steel
2017
[6] The effect of solid solution treatment on the hardness and microstructure of 0.6% wt C-10.8% wt Mn-1.44% wt Cr austenitic manganese steel
Journal of Physics: Conference Series, 2017
[7] The effect of shot peening and precipitation hardening on the wear behavior of high manganese austenitic steels
2017
[8] Comparison of three-body impact abrasive wear behaviors for quenching–partitioning–tempering and quenching–tempering 20Si2Ni3 steels
Wear, 2016
[9] Vliv zpevňování výbuchem na strukturu a vlastnosti Hadfieldovy oceli z hlediska užití v železniční dopravě
2015
[10] Wear characteristics of heat-treated Hadfield austenitic manganese steel for engineering application
Advances in Production Engineering & Management, 2015
[11] PROPERTIES OPTIMIZATION OF HADFIELD AUSTENITIC MANGANESE STEEL CASTING
ANNALS of Faculty Engineering Hunedoara–International journal of Engineering, 2015
[12] Wear characteristics of heat-treated Hadfield austenitic manganese steel for engineering application.
2015
[13] Challenges and Developments of Hadfield manganese steel castings based on service life
2014
[14] Impact–abrasion wear characteristics of in-situ VC-reinforced austenitic steel matrix composite
Materials Science and Engineering: A, 2013
[15] Effect of the Molybdenum on the Microstructural and Mechanical Properties of Hadfield Austenitic Manganese Steel
2013
[16] On the comparison of microstructural characteristics and mechanical properties of high-vanadium austenitic manganese steels with the Hadfield steel
Materials Science and Engineering: A, 2012