Journal of Minerals and Materials Characterization and Engineering

Journal of Minerals and Materials Characterization and Engineering

ISSN Print: 2327-4077
ISSN Online: 2327-4085
www.scirp.org/Journal/jmmce
E-mail: jmmce@scirp.org
"Effect Of Flyash On The Mechanical, Thermal, Dielectric,Rheological And Morphological Properties Of Filled Nylon 6"
written by Suryasarathi Bose, P.A. Mahanwar,
published by Journal of Minerals and Materials Characterization and Engineering, Vol.3 No.2, 2004
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Study some properties for UPS composites reinforced by sunflower husk ash
AIP Conference Proceedings, 2022
[2] Preparation and characterization of coal fly ash reinforced polymer composites: An overview.
Express Polymer …, 2022
[3] The Use of Copper Oxides as Cross-Linking Substances for Chloroprene Rubber and Study of the Vulcanizates Properties. Part II. The Effect of Filler Type on the …
Krzewicka, P Kobędza, K Strzelec… - Materials, 2021
[4] Fabrication and characterization of boron carbide/polymethyl methacrylate composites
Fullerenes, Nanotubes and …, 2021
[5] Fly ash-reinforced polyvinyl chloride composites
Handbook of Fly Ash, 2021
[6] Sustainable Use of Biomass Boiler Ash as a Reinforcement Filler for Polyamide 6 Composite
2021
[7] Prediction of Wear Characteristics of Polymer Composites by ANN Modified by GA
2021
[8] Study of Tribological Behavior of GFRP Hybrid Composite Using Fly-Ash and Graphite as Filler Material
2021
[9] A Study of Some Mechanical and Physical Properties for Palm Fiber/Polyester Composite
2020
[10] Studying the Influence of Nano ZnO and Nano ZrO2 Additives on Properties of PMMA Denture Base.
Indian Journal of Public …, 2020
[11] Influence of processing and particle morphology on final properties of polypropylene/talc nanocomposites
2020
[12] Studying the Influence of Nano ZnO and Nano ZrO2 Additives on Properties of PMMA Denture Base
2020
[13] Effect of Fly Ash on the Mechanical Properties of Polyvinyl Chloride-Fly Ash Composite
2020
[14] Studying the Influence of Nano ZnO and Nano ZrO
2020
[15] Study on the properties of epoxy composites using fly ash as an additive in the presence of nanoclay: mechanical properties, flame retardants, and dielectric …
2020
[16] Effect of fly ash and ball milling time on CNT-FA reinforced aluminium matrix hybrid composites
2019
[17] Experimental Investigation of Mechanical Properties of Impact Modified Polyvinyl Chloride-Fly Ash Composites
2019
[18] Structure and Properties of Epoxy/Fly Ash System: Influence of Filler Content and Surface Modification
2019
[19] Effect of addition of fly ash and carbon nanotubes in aluminium metal matrix produced by powder metallurgy
2019
[20] ASSESSMENT OF EXTRACT OF Musa paradisiaca Linn. IN PRODUCING NANOPARTICLES TO ENHANCE QUALITY OF NYLON FABRIC
Rasayan J. Chem, 2019
[21] Development of Rapid Tooling Using Fused Deposition Modeling
Additive Manufacturing of Emerging Materials, 2019
[22] Available online www. jsaer. com
2018
[23] Optimization of Machining Parameters for Nylon 6 Composite in CNC Lathe Using PCA-Based TOPSIS
2018
[24] On the applicability of composite PA6-TiO2 filaments for the rapid prototyping of innovative materials and structures
Composites Part B: Engineering, 2018
[25] Influence of Surface Treatment on Dynamic Mechanical, Rheological, Thermal and Morphological Properties of Fly Ash filled Epoxy Composites
International Journal On Recent & Innovative Trend In Technology, 2018
[26] The effect of particle size of fly ash (FA) on the interfacial interaction and performance of PVC/FA composites
Journal of Vinyl and Additive Technology, 2018
[27] Preparation and characterization of thermoplastic starch composites with fly ash modified by planetary ball milling
Carbohydrate Polymers, 2018
[28] Industrially viable technique for the preparation of HDPE/fly ash composites at high loading: Thermal, mechanical, and rheological interpretations
Journal of applied polymer science, 2018
[29] FRICTION AND WEAR PERFORMANCE OF CENOSPHERE FILLED CARBON-EPOXY COMPOSITES UNDER DRY AND WATER LUBRICATED CONDITIONS: A …
Journal of Manufacturing Technology Research, 2017
[30] Morphological, mechanical and thermo-kinetic characterization of coal ash incorporated high performance PEO/PMMA thin film electrolyte composites
Materials Research Express, 2017
[31] Aluminium trihydroxide: Novel reinforcing filler in Polychloroprene rubber
Polymer, 2017
[32] Study of mechanical and tribological properties of nylon 66‐titanium dioxide microcomposite
Polymers for advanced technologies, 2017
[33] Effect of Accelerated Weathering on the Compressive Strength for PMMA Nano Composites and PMMA Hybrids Nano Composites Used in Dental Applications
Engineering and Technology Journal, 2017
[34] Multi-response optimization of impact strength and elongation at break of nanocomposites based on polypropylene/polyethylene binary polymer matrix in the …
2017
[35] Design and analysis of reinforced ceramics with epoxy resin & graphite
2017
[36] Sustainable biocomposites from biobased polyamide 6, 10 and biocarbon from pyrolyzed miscanthus fibers
Journal of applied polymer science, 2017
[37] Design and Analysis of Reinforced Ceramic with Epoxy Resin and Graphite
2017
[38] Impact of Bis-(3-triethoxysilylpropyl) tetrasulphide on the properties of PMMA/Cellulose composite
Polymer, 2017
[39] Multi-response optimization of impact strength and elongation at break of nanocomposites based on polypropylene/polyethylene binary polymer matrix in the …
2016
[40] Experimental Investigation and Optimization of Machining Parameters in Drilling of Fly Ash Filled Carbon Fibre Reinforced Composites
The Engineering Economist, 2016
[41] Development of rapid tooling using fused deposition modeling: a review
Rapid Prototyping Journal, 2016
[42] Designing of LDPE/fly ash/expanded graphite sheet for electrostatic charge dissipation application
2016
[43] Development of a lightweight BMC material using fly ash
Advanced Composite Materials, 2016
[44] Synthesis, Structural and Optical Characterization of MgO Nanocrystalline Embedded in PVA Matrix
Journal of Inorganic and Organometallic Polymers and Materials, 2016
[45] Study on Strength of Innovative Mortar Synthesis with Epoxy Resin, Fly Ash and Quarry Dust
2016
[46] Experimental investigations for development of Nylon6-Al-Al2O3 alternative FDM filament
Rapid Prototyping Journal, 2016
[47] Properties of rigid polyvinyl chloride foam composites reinforced with different shape fillers
Journal of Thermoplastic Composite Materials, 2016
[48] Mechanical, dynamic mechanical, and thermal characterization of fly ash and nanostructured fly ash‐waste polyethylene/high‐density polyethylene blend composites
Polymer Composites, 2015
[49] Studies on Physical and Mechanical Properties of Silica Fume-Filled Nylon 66 Polymer Composites for Mechanical Components
Polymers & Polymer Composites, 2015
[50] EFFECTIVE UTILIZATION OF INDUSTRIAL WASTE (FLYASH) TO ENHANCE THE PROPERTIES OF POLYMER COMPOSITES FOR MECHANICAL COMPONENTS
I Control Pollution, 2015
[51] Mechanical and Three-Body Abrasive Wear Behaviour of Cenosphere Filled Epoxy Composites
International Journal of Material Science, 2015
[52] Structural and optical characterization of ZnO doped PC/PS blend nanocomposites
Optical Materials, 2015
[53] Effect of Particle Size and Concentration of Fly Ash on Properties of Polytrimethylene Terepthalate
2015
[54] Studies on Effect of a Silane Coupling Agent (TESPT) on the Properties of Fly Ash-Natural Rubber Composite
Journal of Polymer Materials, 2015
[55] Fly ash used as a reinforcing and flame-retardant filler in low-density polyethylene
Polimery, 2015
[56] LUẬN ÁN TIẾN SĨ HÓA HỌC
2015
[57] Evaluation of thermal and morphological properties of Nylon 6/cenosphere composites
2015
[58] Tensile and Compressive Properties of Kaolin Rienforced Epoxy
Al-Khwarizmi Engineering Journal, 2015
[59] STUDY THE EFFECT OF ADDITION OF NATURAL AND SYNTHETIC MATERIAL ON SOME OF MECHANICAL PROPERTIES OF UNSATURATED POLYESTER
Diyala Journal of Engineering Sciences, 2015
[60] Advances in Fused Deposition Modeling
2014
[61] Experimental Investigations for Development of Hybrid Feed Stock Filament of Fused Deposition Modeling
2014
[62] Development and Characterization of Fly Ash Reinforced Natural Rubber Composite
Journal of Polymer Materials, 2014
[63] Study of Some Mechanical Properties of Unsaturated Polyester Filled with the Seed Shells of Sunflower and Water-Melon
2014
[64] Properties and performance of a simulated consumer polymer waste—coal combustion byproduct composite material
Polymer Engineering & Science, 2014
[65] Effect of Filler Compositions on the Mechanical Properties of Bamboo Filled Polyester Composite
Advanced Materials Research, 2014
[66] Studies on effect of titanate-coupling agent (0.5, 1.5, and 2.5%) on the mechanical, thermal, and morphological properties of fly ash–filled polypropylene composites
Journal of Thermoplastic Composite Materials, 2014
[67] Fracture and thermal behaviour of biomass ash polypropylene composites
Journal of Thermoplastic Composite Materials, 2014
[68] Optimization of Cutting Parameters for Surface Roughness in Machining of gfrp Composites with Graphite/fly Ash Filler
Procedia Materials Science, 2014
[69] Effect of particle size of fly ash cenospheres on the properties of acrylonitrile butadiene styrene-filled composites
Journal of Thermoplastic Composite Materials, 2014
[70] Preparation of zinc and calcium hydroxide-modified fly ash and its utilization as filler in nylon 6
Journal of Thermoplastic Composite Materials, 2014
[71] HDPE‐Fly Ash/Nano Fly Ash Composites
Journal of Applied Polymer Science, 2013
[72] Tensile response and fracture and failure behavior of jute fabrics-flyash-vinylester hybrid composites
Fibers and Polymers, 2013
[73] Deformation and fracture behaviors of vinylester/fly ash composites
Journal of Applied Polymer Science, 2013
[74] Studies on the effect of maleic anhydride–grafted polypropylene with different MFI on mechanical, thermal and morphological properties of fly ash-filled PP composites
Journal of Thermoplastic Composite …, 2013
[75] Static mechanical properties of GFRP laminates with fly ash and graphite as filler material
2013
[76] Determination of the Influence of Fly Ash Particles on the Properties of Low-Density Polyethylene
2013
[77] The Effect of Addition Slag of Cast Iron and Cement to Unsaturated Polyester on Impact and Bending Properties
2013
[78] Melt molding polymer composite and method of making and using the same
US Patent 8,487,034, 2013
[79] Static mechanical properties of GFRP laminates with fly ashand graphite as filler material
2013
[80] Effect of methyl methacrylate–acrylonitrile-butadiene–styrene (MABS) on the mechanical and thermal properties of poly (Methyl Methacrylate)(PMMA)-fly ash …
2012
[81] Tribological Properties of Fly Ash-Based Green Friction Products
Green Tribology, 2012
[82] Evaluation of Flexural Properties of Fly Ash Filled Polypropylene Composites
J Gummadi, GV Kumar, G Rajesh - ijmer.com, 2012
[83] EFFECT OF KAOLIN ON THE MECHANICAL PROPERTIES OF POLYPROPYLENE/POLYETHYLENE COMPOSITE MATERIAL
polymer, 2012
[84] 粉煤灰填充热塑性树脂复合材料的力学性能研究进展
塑料包装, 2012
[85] Effect of Methyl Methacrylate–Acrylonitrile-Butadiene–Styrene (MABS) on the Mechanical and Thermal Properties of Poly (Methyl Methacrylate)(PMMA)-Fly Ash Cenospheres (FAC) Filled Composites
Journal of Minerals and Materials Characterization and Engineering, 2012
[86] HDPE‐ash nanocomposites
Journal of Applied Polymer Science, 2012
[87] PREPARATION AND CHARACTERIZATIONS OF ACRYLONITRILE BUTADIENE STYRENE (ABS)-CENOSPHERE COMPOSITES
JR DESAI, SC SHIT, MD SHAH, SK JAIN - ejournal.aessangli.in, 2012
[88] Preparation and Characterization of CaSiO3/Natural Rubber Composite
Advanced Materials Research, 2012
[89] Viscoelastic, mechanical, and thermal characterization of fly ash‐filled ABS composites and comparison of fly ash surface treatments
Polymer Composites, 2012
[90] Effects of particle type on thermal and mechanical properties of polyoxymethylene nanocomposites
Journal of Thermoplastic Composite Materials, 2012
[91] Rice husk ash–A valuable reinforcement for high density polyethylene
Materials & Design, 2012
[92] Contrast on tensile and flexural properties of glass powder reinforced epoxy composites: pilot study
Journal of applied polymer science, 2012
[93] Thermal and mechanical properties of polyethylene/doped-TiO 2 nanocomposites synthesized using in situ polymerization
Journal of Nanomaterials, 2011
[94] Chemical modification of waste oil fly ash for improved mechanical and thermal properties of low density polyethylene composites
Journal of Polymer Research, 2011
[95] Evaluation of coupling agents in poly (propylene)/fly ash composites: Effect on processing and mechanical properties
Macromolecular Materials and Engineering, 2011
[96] Effective thermal conductivity and coefficient of linear thermal expansion of high-density polyethylene—fly ash composites
Indian Journal of Physics, 2011
[97] Research of Preparation and Characterization of PP/EPDM/CaS Composites
Applied Mechanics and Materials, 2011
[98] Effects of mica and fly ash concentration on the properties of polyester thermoplastic elastomer composites
Journal of Thermoplastic Composite Materials, 2011
[99] Effect of chemical modification of oil fly ash and compatibilization on the rheological and morphological properties of low‐density polyethylene composites
Journal of Applied Polymer Science, 2011
[100] Thermal properties of sawdust reinforced vinyl ester composites post-cured in microwaves: A pilot study
Composites Part B: Engineering, 2011
[101] Deformation and fracture behavior of treated fly ash-filled polycarbonate-toughened epoxy resin composites
Journal of Reinforced Plastics and Composites, 2011
[102] Effect of vanadium pentoxide on the mechanical, thermal, and electrical properties of poly (vinyl alcohol)/vanadium pentoxide nanocomposites
Journal of Applied Polymer Science, 2011
[103] Characterization of Linear Low-Density Polyethylene/Poly (vinyl alcohol) Blends and Their Biodegradability by Vibrio sp. Isolated from Marine Benthic Environment
2011
[104] Characterization of Linear Low-Density Polyethylene/Poly (vinyl alcohol) Blends and Their Biodegradability by Vibrio sp. Isolated from Marine Benthic …
2011
[105] Thermal and mechanical properties of polyethylene/doped-TiO2 nanocomposites synthesized using in situ polymerization
2011
[106] Synthesis and Characterization of Hdpe Plastic Film for Herbicide Container Using Fly Ash Class F As Filler
2010
[107] Characterization of low density polyethylene/oil-fly ash composites and impact of surface modification of oil fly ash on composite properties
ProQuest Dissertations Publishing, 2010
[108] Mechanical properties of fly ash filled high density polyethylene
Journal of Minerals and Materials Characterization and Engineering, 2010
[109] Influence of secondary fillers on the behavior of translaminar failure in glass-epoxy composites
Polymer-Plastics Technology and Engineering, 2010
[110] Rheological, thermal, and mechanical characterization of fly ash‐thermoplastic composites with different coupling agents
Polymer Composites, 2010
[111] Effect of particle size of fly ash on recycled poly (ethylene terephthalate)/fly ash composites
International Journal of Plastics Technology, 2010
[112] Deformation and fracture behavior of PP/ash composites
Composite Interfaces, 2009
[113] Effect of mixing conditions and particle sizes of titanium dioxide on mechanical and morphological properties of polypropylene/titanium dioxide composites
Iranian Polymer Journal, 2009
[114] Effect of particle size and concentration of flyash on properties of polyester thermoplastic elastomer composites
Journal of Minerals and Materials Characterization and Engineering, 2009
[115] Effect of T-ZnOw on the mechanical properties and morphology of PC/T-ZnOw composites
2009
[116] Thermal and electrical behavior of vinylester resin matrix composites filled with fly ash particles
Polymer composites, 2008
[117] Effect of particle sizes of zinc oxide on mechanical, thermal and morphological properties of polyoxymethylene/zinc oxide nanocomposites
Polymer Testing, 2008
[118] Effect of zinc oxide on morphology and mechanical properties of polyoxymethylene/zinc oxide composites
Macromolecular symposia, 2008
[119] Friction and wear behavior of vinylester resin matrix composites filled with fly ash particles
Journal of reinforced plastics and composites, 2007
[120] The Study of Morphology and Mechanical Properties of Compatibilized Polypropylene/Zinc Oxide Composites
Journal of Solid Mechanics and Materials Engineering, 2007
[121] Studies on fly‐ash‐filled natural rubber modified with cardanol derivatives: Processability, mechanical properties, fracture morphology, and thermal decomposition characteristics
Journal of applied polymer science, 2006
[122] PROPIEDADES MECáNICAS DE NUEVOS MATERIALES COMPUESTOS DE POLIPROPILENO CON CENIZAS VOLáTILES COMO RELLENO
2006
[123] Static and dynamic mechanical properties of vinylester resin matrix composites filled with fly ash
Macromolecular Materials and Engineering, 2006
[124] Polyamide 6/calcium carbonate composites obtained by rotational molding via the anionic polymerization of epsilon-caprolactam
G Rusu - Materiale Plastice, 2005
[125] Thermal Diffusivity Nanocomposites of (UPE/Nanomagnisum Oxide)
Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top