"Powder Metallurgical Fabrication and Microstructural Investigations of Aluminum/Steel Functionally Graded Material"
written by Mahmoud M. Nemat-Alla, Moataz H. Ata, Mohamed R. Bayoumi, Wael Khair-Eldeen,
published by Materials Sciences and Applications, Vol.2 No.12, 2011
has been cited by the following article(s):
  • Google Scholar
  • CrossRef
[1] Experimental investigation on laser directed energy deposition of functionally graded layers of Ni-Cr-B-Si and SS316L
2020
[2] Influence of sine material gradients on delamination in multilayered beams
2019
[3] Elastic state of functionally graded curved beam on the plane stress state subject to thermal load
2019
[4] Powder metallurgy process towards functional gradation of Al-Al2O3 metal ceramic mixture samples
2019
[5] Effects of homogeneous and inhomogeneous heating on rotating shrink fits with annular inclusion and functionally graded hub
2019
[6] Additive manufacturing of functionally graded materials: a review
2019
[7] The effect of orthotropic material gradation on the plane sliding frictional contact mechanics problem
2019
[8] Novel approach for fabrication and characterisation of porosity-graded material
2019
[9] Experimental Investigation of Mechanical Properties of Al-Sic-Mgo2 FGM
2019
[10] Application of the Classical Beam Theory for Studying Lengthwise Fracture of Functionally Graded Beams
2019
[11] Lengthwise Cracks in Functionally Graded Beams Exhibiting Non-Linear Mechanical Behaviour of the Material
2019
[12] Fabrication of SS316L-IN625 functionally graded materials by powder-fed directed energy deposition
2019
[13] Laser deposition manufacturing of bimetallic structure from TA15 to inconel 718 via copper interlayer
2019
[14] Analysis of storage capacity and energy conversion on the performance of gradient and double-layered porous electrode in all-vanadium redox flow batteries
2019
[15] Synthesis Techniques of Functionally Graded Materials-A Review
2019
[16] Longitudinal Fracture Analysis of Nonlinear Elastic Circular Shafts Loaded in Torsion
2019
[17] On processing and flexural behaviour of functionally graded clads developed through microwave irradiation
2019
[18] Functionally Graded Materials: An Overview of Stability, Buckling, and Free Vibration Analysis
2019
[19] Development of Gradient Concentrated Single-Phase Fine Mg-Zn Particles and Effect on Structure and Mechanical Properties
2019
[20] On the design of rotating elastic shrink fits with annular inclusion and functionally graded hub
2019
[21] Non-linear elastic analysis of delamination in two-dimensional functionally graded multilayered beams
2019
[22] Influence of material inhomogeneity and non-linear mechanical behavior of the material on delamination in multilayered beams
2019
[23] Experimental study on mechanical and ballistic behaviours of silicon carbide reinforced functionally graded aluminum foam composites
2019
[24] Нелинейный анализ расслоения при кручении многослойного вала из функционально-градиентного материала
2018
[25] Mechanical and Wear Properties of Functionally Graded Cu-11Ni-4Si/Graphite Composite
2018
[26] Nonlinear Delamination Analysis of Mulyilayered Functionally Graded Circular Shafts in Torsion
2018
[27] A Review for Functionally Gradient Materials Processesand Useful Application
2018
[28] A Review For Functionally Gradient Materials Processes And Useful Application
2018
[29] Non-linear fracture in bi-directional graded shafts in torsion
Multidiscipline Modeling in Materials and Structures, 2018
[30] Fracture Analysis of a Three-Dimensional Functionally Graded Multilayered Beam
Strength of Materials, 2018
[31] Analysis of cylindrical delamination cracks in multilayered functionally graded non-linear elastic circular shafts under combined loads
2018
[32] Thermally assembled shrink fit with annular inclusion and FGM‐hub
2018
[33] Experimental analysis and thermodynamic calculations of an additively manufactured functionally graded material of V to Invar 36
Journal of Materials Research, 2018
[34] Fabrication of aluminum alloy functionally graded material using directional solidification under an axial static magnetic field
Scientific Reports, 2018
[35] Non-linear fracture analysis of multilayered two-dimensional graded beams
Multidiscipline Modeling in Materials and Structures, 2018
[36] Interactive geometric interpretation and static analysis of thin-walled bi-directional functionally graded beams
Composite Structures, 2018
[37] Numerical Investigation of Heat Transfer Enhancement Inside the Pipes Filled With Radial Pore-Size Gradient Porous Materials
2018
[38] Lengthwise fracture analyses of functionally graded beams by the Ramberg-Osgood equation
Engineering Review, 2018
[39] Fracture analysis of a three-dimensional functionally graded beam
International Journal of Structural Integrity, 2018
[40] Development of gradient concentrated single phase fine Mg-Zn particles and effect on structure and mechanical properties
2018
[41] Non-linear longitudinal fracture in a functionally graded beam
2018
[42] Toward the study of additively manufactured functionally graded materials: Experimental analysis of microstructure, phase composition, and mechanical properties
2017
[43] Analyses of Delamination in Functionally Graded Multilayered Beams.
2017
[44] Future Research Direction in Functionally Graded Materials and Summary
Functionally Graded Materials, 2017
[45] Functionally Graded Composites: Processing and Applications
Composite Materials, 2017
[46] Etude du comportement physique des nanostructures pour les matériaux graduée (FGM)
2017
[47] Fracture analysis of functionally graded beams with considering material non-linearity
2017
[48] Processing Methods of Functionally Graded Materials
Functionally Graded Materials, 2017
[49] Delamination fracture in a functionally graded multilayered beam with material nonlinearity
Archive of Applied Mechanics, 2017
[50] Additive Manufacturing of a Functionally Graded Material from Ti-6Al-4V to Invar: Experimental Characterization and Thermodynamic Calculations
Acta Materialia, 2017
[51] Types of Functionally Graded Materials and Their Areas of Application
Functionally Graded Materials, 2017
[52] Delamination fracture analysis of an elastic-plastic functionally graded multilayered beam
International Journal of Mechanical and Materials Engineering, 2017
[53] Analytical study of elastic-plastic longitudinal fracture in a functionally graded beam
Strength, Fracture and Complexity, 2017
[54] Design and characterization of isothermal chambers filled with gradient-porous materials
Journal of Thermal Science and Technology, 2017
[55] An analytical solution to the stain energy release rate of a crack in functionally graded nonlinear elastic beams
European Journal of Mechanics - A/Solids, 2017
[56] Study some mechanical properties of copper-alumina functionally graded materials
Advances in Natural and Applied Sciences, 2017
[57] Functionally Graded Materials
Topics in Mining, Metallurgy and Materials Engineering book series, 2017
[58] Design of Zirconia-Aluminum Functionally Graded Material for Buckling and Vibration Characteristics Enhancement of Beam/Column Structure
Key Engineering Materials, 2017
[59] Elastic–plastic design of a rotating shrink fit with functionally graded hub
Archive of Applied Mechanics, 2017
[60] Lengthwise Fractureof Two-Dimensional Functionally Graded Non-Linear Elastic Beam
2017
[61] Analysis of longitudinal cracked two-dimensional functionally graded beams exhibiting material non-linearity
Frattura ed Integrità Strutturale, 2017
[62] INFLUENCE OF PROCESS PARAMETERS ON THREE BODY ABRASIVE WEAR BEHAVIOUR OF FUNCTIONALLY GRADED ALUMINIUM ALLOY …
2017
[63] Longitudinal Fracture Analysis of a Two-Dimensional Functionally Graded Beam
IOP Conference Series: Materials Science and Engineering, 2017
[64] PROPERTIES OF AL/CU BIMETALLIC PLATE PREPARED BY P/M TECHNIQUE: SINTERING TEMPERATURE EFFECT
2017
[65] A brief review of functionally graded materials
2017
[66] Sıcak Presleme Yöntemiyle Üretilmiş B4C Takviyeli AA 7xxx Matrisli Fonksiyonel Derecelendirilmiş Malzemelerin Çapraz Kırılma Dayanımının Belirlenmesi
Mu? Alparslan üniversitesi Fen Bilimleri Dergisi [Mus Alparslan University Journal of Science], 2017
[67] Silindirik eksenli homojen ve heterojen panellerin ısıl yük altında elastik davranışları
2016
[68] Wave propagation in materials and structures
Wave Propagation in Materials and Structures, 2016
[69] Optimal design of process parameters during laser direct metal deposition of multi-material parts
ProQuest Dissertations Publishing, 2016
[70] Spark Plasma Sintering of Ultrafine YSZ Reinforced Cu Matrix Functionally Graded Composite
Acta Metallurgica Sinica (English Letters), 2016
[71] Numerical study of S1 zero group velocity Lamb modes for nonlinear functionally graded materials
Canadian Journal of Physics, 2016
[72] Functionally graded materials: A review of fabrication and properties
Applied Materials Today, 2016
[73] Thermally loaded thick‐walled cylindrically curved aluminum/steel‐FGM‐panel
PAMM, 2016
[74] Elastic-plastic fracture of functionally graded circular shafts in torsion
2016
[75] A Review For Functionally Gradient Materials Manufacturing And Useful Application
2016
[76] Radial heating of a thick‐walled cylindrically curved FGM‐panel
ZAMM‐Journal of Applied Mathematics and Mechanics/Zeitschrift für Angewandte Mathematik und Mechanik, 2016
[77] Nonlinear Fracture of Functionally Graded Beams Under Mode II Loading Conditions
Strength of Materials, 2016
[78] Numerical Simulation of Power, Movement Speed and Laser Beam Diameter in Forming Process of FGM Plates According to the Exponential Law
2015
[79] Eksenel yönde fonksiyonel derecelendirilmiş kısa kirişlerin burkulma ve serbest titreşim analizi
2015
[80] Characterization of Microscale Drilling Process for Functionally Graded M2-Cu Material Using Design of Experiments
2015
[81] 실험계획법을 이용한 M2-Cu 기능성 경사 재료의 마이크로 드릴링 특성 평가
2015
[82] Shrink fit with solid inclusion and functionally graded hub
Composite Structures, 2015
[83] FEM Simulation of the Bending Angle During the Laser Forming of FGM Plates
Journal of Thermal Stresses, 2015
[84] Numerical configuration design and investigation of heat transfer enhancement in pipes filled with gradient porous materials
Energy Conversion and Management, 2015
[85] Recent development in modeling and analysis of functionally graded materials and structures
Progress in Aerospace Sciences, 2015
[86] FUNCTIONALLY GRADED MATERIAL: ANOVERVIEW
International Journal of Advances in Engineering Science and Technology, 2015
[87] Shrink fit with FGM‐hub subject to heating and rotation
PAMM, 2015
[88] Property Estimation of Functionally Graded Materials Between M2 Tool Steel and Cu Fabricated by Powder Metallurgy
Transactions of the Korean Society of Mechanical Engineers - A, 2014
[89] Functionally Graded Materials: A Critical Review
International Journal of Research, 2014
[90] 분말야금으로 제작된 M2 공구강과 Cu 간 기능성 경사 복합재의 물성 평가
2014
[91] Failure of functionally graded materials
2014
[92] İşlevsel derecelendirilmiş bor karbür takviyeli AA7075 esaslı kompozitlerin 7, 62 mm'lik zırh delici mermiler karşısındaki balistik özelliklerinin incelenmesi
2013
[93] Functionally graded material: an overview
Proceedings of the World Congress on Engineering 2012 Vol III, 2012