Experimental Study on Latent Heat Storage Characteristics of W/O Emulsion by Ultrasonic Wave Impression

HTML  Download Download as PDF (Size: 404KB)  PP. 48-54  
DOI: 10.4236/ojfd.2013.32A008    2,966 Downloads   4,942 Views  Citations

ABSTRACT

The flowable latent heat storage material like Oil/Water type emulsion, microencapsulated latent heat material-water mixture or ice slurry, etc., is enabled to transport the latent heat in a pipe. Supercooling phenomenon of the dispersed latent heat storage material in continuous phase is obstructed by a latent heat storage. The latent heat storage rates of dispersed waterdrops in W/O (Water/Oil) emulsion are investigated experimentally in this study. The waterdrops in emulsion have the diameter within 3 - 25 μm, the averaged diameter of waterdrops is 7.3 μm and the standard deviation is 2.9 μm. Supercooling release of waterdrops in emulsion is examined by short time impressing of the ultrasonic. The direct contact heat exchange method is chosen as the phase change rate evaluation of waterdrops in W/O emulsion. The supercooled temperature is set as parameters of this study. The previous obtained experimental result, as the condition without impressing ultrasonic wave, showed that the 35 K or more degree from melting point brings 100% latent heat storage rate of W/O emulsion. It is clarified that it is possible to reduce 20 K of supercooling degree by impressing the ultrasonic.

Share and Cite:

S. Morita, Y. Hayamizu, A. Horibe, N. Haruki, H. Inaba and I. Higashi, "Experimental Study on Latent Heat Storage Characteristics of W/O Emulsion by Ultrasonic Wave Impression," Open Journal of Fluid Dynamics, Vol. 3 No. 2A, 2013, pp. 48-54. doi: 10.4236/ojfd.2013.32A008.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.