Volume 2, Number 10, October 2010 (Special Issue on )

Cover Page, Table of Contents and Others: PDF (size: 1909KB)

Effect of Periodic Variation of Sol-air Temperature on the Performance of Integrated Solar Collector Storage System ()

Nawaf H. Saeid, Tan Jun Wong

Abstract | References Full-Text HTML   Pub. Date: November 29, 2010

DOI: 10.4236/eng.2010.210106  5,417 Downloads  10,019 Views   Citations
This article belongs to the Special Issue on

A Fast Predicating of Nutrient Removal Efficiency in Five Steps Sequencing Batch Reactor System Using Fuzzy Logic Control Model ()

Saad Abualhail, Rusul Naseer, Ammar Ashor, Xi-Wu Lu

Abstract | References Full-Text HTML   Pub. Date: November 29, 2010

DOI: 10.4236/eng.2010.210105  4,078 Downloads  7,673 Views   Citations
This article belongs to the Special Issue on

Nonlinear Control of an Induction Motor Using a Reduced-Order Extended Sliding Mode Observer for Rotor Flux and Speed Sensorless Estimation ()

Olivier Asseu, Michel Abaka Kouacou, Theophile Roch Ori, Zié Yéo, Malandon Koffi, Xuefang Lin-Shi

Abstract | References Full-Text HTML   Pub. Date: November 29, 2010

DOI: 10.4236/eng.2010.210104  6,145 Downloads  11,162 Views   Citations
This article belongs to the Special Issue on

Using Image Analysis for Structural and Mechanical Cha-racterization of Nanoclay Reinforced Polypropylene Com-posites ()

Turup Pandurangan Mohan, Krishnan Kanny

Abstract | References Full-Text HTML   Pub. Date: November 29, 2010

DOI: 10.4236/eng.2010.210103  4,782 Downloads  8,645 Views   Citations
This article belongs to the Special Issue on

Optimization of Surface Milling of Hardened AISI4340 Steel with Minimal Fluid Application Using a High Velocity Narrow Pulsing Jet of Cutting Fluid ()

K. Leo Dev Wins, A. S. Varadarajan, B. Ramamoorthy

Abstract | References Full-Text HTML   Pub. Date: November 29, 2010

DOI: 10.4236/eng.2010.210102  4,482 Downloads  8,720 Views   Citations
This article belongs to the Special Issue on

Surface Roughness Evaluation in Dry-Cutting of Magnesium Alloy by Air Pressure Coolant ()

Jeong-Du Kim, Keon-Beom Lee

Abstract | References Full-Text HTML   Pub. Date: November 29, 2010

DOI: 10.4236/eng.2010.210101  5,536 Downloads  9,599 Views   Citations
This article belongs to the Special Issue on

Geometric Inversion of Two-Dimensional Stokes Flows – Application to the Flow between Parallel Planes ()

Mustapha Hellou

Abstract | References Full-Text HTML XML   Pub. Date: November 29, 2010

DOI: 10.4236/eng.2010.210100  5,158 Downloads  9,170 Views   Citations
This article belongs to the Special Issue on

Analysis of the Manufactured Tolerances with the Three-Dimensional Method of Angular Chains of Dimensions Applied to a Cylinder Head of Car Engine ()

Aida Mezghani, Alain Bellacicco, Jamel Louati, Alain Rivière, Mohamed Haddar

Abstract | References Full-Text HTML   Pub. Date: November 29, 2010

DOI: 10.4236/eng.2010.210099  4,744 Downloads  8,248 Views   Citations
This article belongs to the Special Issue on

Modelling and Optimisation of a Spring-Supported Diaphragm Capacitive MEMS Microphone ()

Norizan Mohamad, Pio Iovenitti, Thurai Vinay

Abstract | References Full-Text HTML   Pub. Date: November 29, 2010

DOI: 10.4236/eng.2010.210098  8,508 Downloads  15,299 Views   Citations
This article belongs to the Special Issue on

Influence of Cutting and Geometrical Parameters on the Cutting Force in Milling ()

Hedi Yangui, Bacem Zghal, Amir Kessentini, Gaël Chevallier, Alain Rivière, Mohamed Haddar, Chafik Karra

Abstract | References Full-Text HTML   Pub. Date: November 29, 2010

DOI: 10.4236/eng.2010.210097  6,623 Downloads  13,219 Views   Citations
This article belongs to the Special Issue on