Biography

Dr. Smith Eiamsa-ard

Department of Mechanical Engineering

Mahanakorn University of Technology, Thailand


Emial: smith@mut.ac.th


Qualifications
2006 D.Eng., King Mongkut’s Institute of Technology Ladkrabang, Mechanical Engineering

2000 M.Eng., King Mongkut’s Institute of Technology Ladkrabang, Mechanical Engineering

1996 B.Eng., Mahanakorn University of Technology, Mechanical Engineering


Publications (Selected)

  1. Teerapat Chompookham, Smith Eiamsa-ard and Pongjet Promvonge, Heat transfer enhancement of turbulent channel flow by baffles with rectangular, triangular and trapezoidal upper edges, Journal of Engineering Thermophysics, accepted for publication, 2014.
  2. Smith Eiamsa-ard, Kwanchai Nanan, Khwanchit Wongcharee, Kittisak Yongsiri and Chinaruk Thianpong, Thermohydraulic performance of heat exchanger tube equipped with single, double and triple helical twisted-tapes, Chemical Engineering Communications, accepted for publication, 2014.
  3. Smith Eiamsa-ard, Monsak Pimsarn and Chinaruk Thianpong, Performance assessment in a heat exchanger tube with opposite/parallel wing twisted-tapes, Advances in Mechanical Engineering, accepted for publication, 2014.
  4. Kwanchai Nanan, Monsak Pimsarn, Chinaruk Thianpong and Smith Eiamsa-ard, Heat transfer enhancement by helical screw tape coupled with rib turbulators, Journal of Mechanical Science and Technology, accepted for publication, 2014.
  5. Makatar Wae-hayee, Perapong Tekasakul, Smith Eiamsa-ard and Chayut Nuntadusit, Flow and heat transfer characteristics of in-line impinging jets with cross-flow at short jet-to-plate distance, Experimental Heat Transfer: A Journal of Thermal Energy Generation, Transport, Storage, and Conversion, accepted for publication, 2014.
  6. Makatar Wae-hayee, Perapong Tekasakul, Smith Eiamsa-ard and Chayut Nuntadusit, Effect of Cross-flow Velocity on Flow and Heat Transfer Characteristics of Impinging Jet with Low Jet-to-Plate Distance, Journal of Mechanical Science and Technology, accepted for publication, 2014.
  7. Smith Eiamsa-ard and Kunlanan Kiatkittipong, Heat transfer enhancement by multiple twisted tape inserts and TiO2/water nanofluid, Applied Thermal Engineering, Volume 70, Number 1, pp. 896-924, 2014.
  8. Suriya Cho Petpices Eiamsa-ard, Niwat Piriyarungroj, Chinaruk Thianpong and Smith Eiamsa-ard, A case study on thermal performance assessment of a heat exchanger tube equipped with regularly-spaced twisted tapes as swirl generators, Case Studies in Thermal Engineering, Volume 3, pp. 86-102, 2014.
  9. Suriya Chokphoemphun, Chayodom Hinthao, Smith Eiamsa-ard, Pongjet Promvonge and Chinaruk Thianpong, Thermal performance in circular tube with co/counter-twisted tapes, Advanced Materials Research, Volumes 931-932, pp. 1198-1202, 2014.
  10. Kwanchai Nanan, Chinaruk Thianpong, Pongjet Promvonge and Smith Eiamsa-ard, Investigation of heat transfer enhancement by perforated helical twisted-tapes, International Communications in Heat and Mass Transfer, Volume 52, pp. 106-112, 2014.
  11. Kittisak Yongsiri, Petpices Eiamsa-ard, Khwanchit Wongcharee and Smith Eiamsa-ard, Augmented heat transfer in a turbulent channel flow with inclined detached-ribs, Case Studies in Thermal Engineering, Volume 3, pp. 1-10, 2014.
  12. Masoud Bovand, Mohammad Sadegh Valipour, Kevser Dincer, Smith Eiamsa-ard, Application of Response Surface Methodology to optimization of a standard Ranque-Hilsch vortex tube refrigerator, Applied Thermal Engineering, Volume 67, number 1-2, pp. 545-553, 2014.
  13. Reza Beigzadeh, Masoud Rahimi, Mehdi Parvizi, Smith Eiamsa-ard, Application of ANN and GA for the prediction and optimization of thermal and flow characteristics in a rectangular channel fitted with twisted tape vortex generators, Numerical Heat Transfer, Part A: Applications An International Journal of Computation and Methodology, Volume 65, Number 1, pp. 186-199, 2014.
  14. Masoud Bovand, Mohammad Sadegh Valipour, Smith Eiamsa-ard and Ali Tamayol, Numerical analysis for curved vortex tube optimization, International Communications in Heat and Mass Transfer, Volume 50, pp. 98-107, 2014.
  15. Kwanchai Nanan, Monsak Pimsarn, Withada Jedsadaratanachai and Smith Eiamsa-ard, Heat transfer augmentation through the use of wire-rod bundles under constant wall heat flux condition, International Communications in Heat and Mass Transfer, Volume 48, pp. 133-140, 2013.
  16. Smith Eiamsa-ard, Vichan Kongkaitpaiboon, Kwanchai Nanan, Thermohydraulics of turbulent flow through heat exchanger tubes fitted with circular-rings and twisted tapes, Chinese Journal of Chemical Engineering, Volume 21, Number 6, pp. 585-593, 2013.
  17. Smith Eiamsa-ard, Somchai Sripattanapipat and Pongjet Promvonge, Influence of triangular wavy baffles on heat and fluid flow characteristics in a channel, Journal of Mechanical Science and Technology, Volume 27, Number 7, pp. 2199-2208, 2013.
  18. Kwanchai Nanan, Kittisak Yongsiri, Khwanchit Wongcharee, Chinaruk Thianpong and Smith Eiamsa-ard, Heat transfer enhancement by inserting helically-twisted tapes inducing co and counter swirl flows, International Communications in Heat and Mass Transfer, Volume 46, pp. 67-73, 2013.
  19. Smith Eiamsa-ard, Chayut Nuntadusit and Pongjet Promvonge, Effect of Twin Delta-Winged Twisted-Tape on Thermal Performance of Heat Exchanger Tube, Heat Transfer Engineering, An International Journal, Volume 34, Number 15, pp. 1278-1288, 2013.
  20. Smith Eiamsa-ard, Kwanchai Nanan, Chinaruk Thianpong and Petpices Eiamsa-ard, Thermal performance evaluation of heat exchanger tubes equipped with coupling twisted-tapes, Experimental Heat Transfer: A Journal of Thermal Energy Generation, Transport, Storage, and Conversion, Volume 26, Number 6, pp. 413-430, 2013.
  21. Smith Eiamsa-ard, Puwanat Somklieng, and Chinaruk Thianpong, Heat transfer enhancement in tube by inserting uniform/non-uniform twisted-tapes with alternate axes: Effect of rotated-axis length, Applied Thermal Engineering, Volume 54, pp. 289-309, 2013.
  22. Smith Eiamsa-ard and Khwanchit Wongcharee, Heat transfer characteristics of micro-fin tube equipped with double twisted tapes: effect of twisted tape and micro-fin tube arrangements, Journal of Hydrodynamics: Series B, Volume 25, Number 2, pp. 205-214, 2013.
  23. Smith Eiamsa-ard, Kittisak Yongsiri, Kwanchai Nanan and, Chinaruk Thianpong, Studies on thermohydraulic characteristics of co/counter swirl flow through a round tube fitted with helical-screw tape and twisted-tape, Indian Journal of Chemical Technology, Volume 20, Number 2, pp. 145-155, 2013.
  24. Smith Eiamsa-ard and Khwanchit Wongcharee, Single-phase heat transfer of CuO/water nanofluids in micro-fin tube equipped with dual twisted-tapes, International Communications in Heat and Mass Transfer, Volume 39, Number 9, pp. 1453-1459, 2012.
  25. Smith Eiamsa-ard, Kittisak Yongsiri, Kwanchai Nanan and Chinaruk Thianpong, Heat transfer augmentation by helically twisted tapes as swirl and turbulence promoters, Chemical Engineering and Processing: Process Intensification, Volume 60, pp. 42-48, 2012.

Profile Details

Null

Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top