Biography

Raj Das

School of Engineering

RMIT University, Australia


Email: raj.das@rmit.edu.au


Qualifications

2002-2005 Ph.D., Monash University, Applied Mechanics

1995-1999 B.E., Jadavpur University, Engineering


Publications (selected)


  1. Davey, S., Das, R., Kalyanasundaram, S., and Cantwell, W.J., 2013. Forming studies of carbon fibre composite sheets in dome forming processes, Composite Structures, vol. 97, pp. 310-316. Impact factor (5 year): 2.281.
  2. Das, R. and Cleary, P.W., 2013. A mesh-free approach for fracture modelling of gravity dams under earthquake, International Journal of Fracture, vol. 179(1), pp. 9-33. DOI: 10.1007/s10704-012-9766-3. Impact factor (5 year): 1.271.
  3. Rao, S., Das, R., and Bhattacharyya, D., 2013. Investigation of bond strength and energy absorption capabilities in recyclable sandwich panels. Composites Part A: Applied Science and Manufacturing, vol. 45(1), pp. 6-13. Impact factor (5 year): 3.160.
  4. Fernandez, J.W., Das, R., Cleary, P.W., Hunter, P., Thomas, C.D.L., Clement, J., 2013. Using Smooth Particle Hydrodynamics to investigate Femoral Cortical bone remodelling at the Haversian level, International Journal for Numerical Methods in Biomedical Engineering, vol. 29(1), pp. 129-143, DOI: 10.1002/cnm.2503, Impact factor (5 year): 2.031.
  5. Das, R., and Jones, R., 2012. Characteristics of the design surface of damage tolerance parameters and their relation to shape optimisation. International Journal of Fatigue (in press, accepted on 25 April, 2012). Impact factor (5 year): 1.822.
  6. Das, R., Bhattacharjee, K.S., and Rao, S., 2012. Welding heat transfer analysis using Element Free Galerkin Method. Advanced Materials Research, Trans Tech Publications, Switzerland, vol. 410, pp. 298-301 (DOI: 10.4028/www.scientific.net/AMR.410.298).
  7. Fagan, T., Das, R., Lemiale, V., and Estrin, Y., 2012. Modelling of Equal Channel Angular Pressing using a Mesh-free Method, Journal of Materials Science, vol. 47(11), pp. 4514-4519. Impact factor (5 year): 1.723.
  8. Islam, S., Ibrahim, R.N., Das, R. and Fagan, T., 2012. Novel approach for modelling of nanomachining using a mesh-less method, Applied Mathematical Modelling (accepted on 4 January, 2012). DOI: 10.1016/j.apm.2012.01.005. Impact factor (5 year): 1.502.
  9. Chai, M.W., Bickerton, S., Bhattacharyya, D. and Das, R., 2012. Influence of Natural Fibres on the Flammability of Composites from Bio-derived Materials, Composites Part B: Engineering, (accepted on 14 November, 2011). Impact factor (5 year): 2.235.
  10. Cleary, P.W., Prakash, M., Das, R. and Ha, J., 2012. Modelling of Metal Forging using SPH. Applied Mathematical Modelling, vol. 36(8), pp. 3836–3855. DOI: 10.1016/j.apm.2011.11.019. Impact factor (5 year): 1.502.
  11. Elambasseril, J., Ibrahim, R.N. and Das, R., 2011. Evaluation of fracture characteristics of ceramic coatings on stainless steel substrates using circumferentially notched tensile specimens, Composites Part B: Engineering, vol. 42(6), pp. 1596-1602, DOI: 10.1016/j.compositesb.2011.04.007. Impact factor (5 year): 2.235.
  12. Karekal, S., Das, R., Losse, L. and Cleary, P.W., 2011. Application of a mesh-free continuum method for simulation of rock caving processes. International Journal of Rock Mechanics and Mining Sciences, vol. 48(5), pp. 703-711. Impact factor (5 year): 1.688.
  13. Das, R., and Jones, R., 2011. Optimal topology design of industrial structures using an evolutionary algorithm. Optimization and Engineering, vol. 12(4), pp. 681-717 (DOI: 10.1007/s11081-010-9132-0). Impact factor (5 year): 1.414.
  14. Das, R., and Jones, R., 2011. Residual strength optimisation of a vent hole in an aircraft component using a heuristic method. Advanced Materials Research, vol. 275, pp. 105-108 (DOI:10.4028/www.scientific.net/AMR.275.105).
  15. Islam, S. Ibrahim, R.N. and Das, R., 2011. Study of abrasive wear mechanism through nano machining. Key Engineering Materials, vol. 462-463, pp. 931–936.
  16. Das, R. and Cleary, P.W., 2010. Effect of rock shapes on brittle fracture using Smoothed Particle Hydrodynamics. Theoretical and Applied Fracture Mechanics, vol. 53, pp. 47-60 (DOI: 10.1016/j.tafmec.2009.12.004). Impact factor (5 year): 1.267.
  17. Das, R. and Cleary, P.W., 2010. Application of SPH for modelling heat transfer and residual stress generation in arc welding, Materials Science Forum, Trans Tech Publications, Switzerland, vol. 654-656, pp. 2751-2754.
  18. Elambasseril, J., Ibrahim, R.N. and Das, R., 2010. Determination of mechanical properties of TiN coating using a notched cylindrical stainless steel substrate. Materials Science Forum, Trans Tech Publications, Switzerland, vol. 654-656, pp. 1860-1863.
  19. Das, R., and Jones, R., 2009. Fatigue life enhancement of structures using shape optimisation. Theoretical and Applied Fracture Mechanics, vol. 52, pp. 165–179 (DOI: 10.1016/j.tafmec.2009.09.006). Impact factor (5 year): 1.267.
  20. Wu, F.W., Ibrahim, R.N., Das, R. and Singh Raman, R.K., 2009. Fracture toughness for CNT specimens from numerically obtained critical CTOD values. Theoretical and Applied Fracture Mechanics, vol. 52, pp. 50-54 (DOI: 10.1016/j.tafmec.2009.06.003). Impact factor (5 year): 1.267.
  21. Das, R., and Jones, R., 2009. Designing cutouts for optimum residual strength in plane structural elements. International Journal of Fracture, vol. 156(2), pp. 129-153 (DOI 10.1007/s10704-009-9352-5). Impact factor (5 year): 1.271.
  22. Wu, F.W., Ibrahim, R.N., Singh Raman, R.K., and Das, R., 2009. Using thermo-mechanical conditioning cycles to improve fracture toughness of low carbon steel. Metallurgical and Materials Transactions A, vol. 40(5), pp. 1118-1125. Impact factor (5 year): 1.948.
  23. Das, R., and Jones, R., 2009. Damage tolerance based design optimisation of a Fuel Flow Vent Hole in an aircraft structure. Structural and Multidisciplinary Optimization, vol. 38(3): pp. 245-265. Impact factor (5 year): 1.715.
  24. Das, R., and Jones, R., 2008. Development of a 3D Biological Method for Fatigue Life based Optimisation and its Application to Structural Shape Design. International Journal of Fatigue, vol. 31(2), pp. 309-321. Impact factor (5 year): 2.031.
  25. Ibrahim, R.N., Das, R., Wu, F.W., and Singh Raman, R.K., 2008. Two-step linear elastic finite element analysis: A new approach for evaluating fracture toughness for CNT specimens. International Journal of Materials and Structural Integrity, vol. 2(4), pp. 319-331. ISSN: 1745-0055.
  26. Das, R., Jones, R. and Chandra, S., 2007. Damage tolerance based shape design of a stringer cutout using Evolutionary Structural Optimisation. Engineering Failure Analysis, vol. 14(3), pp. 118-137. ISSN: 1350-6307. Impact factor (5 year): 0.817.
  27. Das, R., Jones, R. and Peng, D., 2006. Optimisation of damage tolerant structures using 3D biological algorithm. Engineering Failure Analysis, vol. 13(3), pp. 362-379. ISSN: 1350-6307. Impact factor (5 year): 0.817.
  28. Das, R., Jones, R. and Xie, Y. M., 2005. Design of structures for optimal static strength using ESO. Engineering Failure Analysis, vol. 12(1), pp. 61-80. ISSN: 1350-6307. Impact factor (5 year): 0.817.


Free SCIRP Newsletters
Copyright © 2006-2024 Scientific Research Publishing Inc. All Rights Reserved.
Top