Ibrahim M. Alarifi
Majmaah University,
Saudi Arabia
Assistant
Professor
Email: i.alarifi@mu.edu.sa
Research fields
Materials Science
Biomaterials
Nanotechnology
Carbon Fibers
Polymers and
Composites
Qualifications
2017 Ph.D., Wichita State University, USA
2016 M.Sc., Southern
Methodist University, USA
2010 M.Sc., Eastern
Michigan University, USA
2008 B.Sc., University
of Toledo, USA
Publications (Selected)
-
Asadi, A. and Alarifi,
I.M., 2020. Effects of ultrasonication time on stability, dynamic viscosity,
and pumping power management of MWCNT-water nanofluid: an experimental
study. Scientific reports, 10(1), pp.1-10.
-
Butt, M.S., Maqbool, A., Umer,
M.A., Saleem, M., Malik, R.A., Alarifi, I.M. and Alrobei, H., 2020.
Enhanced Mechanical Properties of Surface Treated AZ31 Reinforced Polymer
Composites. Crystals, 10(5), p.381.
-
Asadi, A., Bakhtiyari, A.N.
and Alarifi, I.M., 2020. Predictability evaluation of support vector
regression methods for thermophysical properties, heat transfer performance,
and pumping power estimation of MWCNT/ZnO–engine oil hybrid nanofluid. Engineering
with Computers.
-
Alarifi, I.M., 2020.
Investigation into the morphological and mechanical properties of date palm
fiber‐reinforced epoxy structural
composites. Journal of Vinyl and Additive Technology.
-
Alshayji, A., Asadi, A.
and Alarifi, I.M., 2020. On the heat transfer effectiveness and pumping
power assessment of a diamond-water nanofluid based on thermophysical
properties: An experimental study. Powder Technology.
-
Asadi, A., Alarifi, I.M.
and Foong, L.K., 2020. An experimental study on characterization, stability and
dynamic viscosity of CuO-TiO2/water hybrid nanofluid. Journal of
Molecular Liquids, p.112987.
-
Abd-Elhady, A.A., Sallam,
H.E.D.M., Malik, R.A., Alarifi, I.M. and El-Bagory, T.M., 2020.
Investigation of fatigue crack propagation in steel pipeline repaired by glass
fiber reinforced polymer. Composite Structures, 242,
p.112189.
-
Lyu, Z., Asadi, A., Alarifi,
I.M., Ali, V. and Foong, L.K., 2020. Thermal and Fluid Dynamics Performance of
MWCNT-Water Nanofluid Based on Thermophysical Properties: An Experimental and
Theoretical Study. Scientific Reports, 10(1),
pp.1-14.
-
Alarifi, I.M., 2020.
Structural analysis of hexagonal and solid carbon fibers composite. Polymer
Testing, p.106392.
-
Abbas, N., Malik, M.Y.,
Nadeem, S. and Alarifi, I.M., 2020. On extended version of Yamada–Ota and
Xue models of hybrid nanofluid on moving needle. The European Physical
Journal Plus, 135(2), p.145. (IF = 2.612, R = Q2).
-
Alhajri, I.H., Alarifi,
I.M., Asadi, A., Nguyen, H.M. and Moayedi, H., 2020. A general model for
prediction of BaSO4 and SrSO4 solubility in aqueous electrolyte solutions over
a wide range of temperatures and pressures. Journal of Molecular
Liquids, 299, p.112142.
-
Asadi, A., Alarifi, I.M.,
Nguyen, H.M. and Moayedi, H., Feasibility of least-square support vector
machine in predicting the effects of shear rate on the rheological properties
and pumping power of MWCNT–MgO/oil hybrid nanofluid based on experimental
data. Journal of Thermal Analysis and Calorimetry, pp.1-16.
-
Asmatulu, R., Bollavaram,
P.K., Patlolla, V.R., Alarifi, I.M. and Khan, W.S., Investigating the
effects of metallic submicron and nanofilms on fiber-reinforced composites for
lightning strike protection and EMI shielding. Advanced Composites and
Hybrid Materials, pp.1-18.
-
Alamir, M.A., Alarifi,
I.M., Khan, W.A., Khan, W.S. and Asmatulu, R., 2019. Electrospun Nanofibers:
Preparation, Characterization and Atmospheric Fog Capturing Capabilities. Fibers
and Polymers, 20(10), pp.2090-2098.
-
Nadeem, S., Alblawi, A.,
Muhammad, N., Alarifi, I.M., Issakhov, A. and Mustafa, M.T., 2019. A
computational model for suspensions of motile micro-organisms in the flow of
ferrofluid. Journal of Molecular Liquids, p.112033.
-
Bayat, M., Alarifi, I.M.,
Khalili, A.A., El-Bagory, T.M., Nguyen, H.M. and Asadi, A., 2019.
Thermo-mechanical contact problems and elastic behaviour of single and double
sides functionally graded brake disks with temperature-dependent material
properties. Scientific Reports, 9(1), pp.1-16.
-
Asmatulu, R., Erukala, K.S.,
Shinde, M., Alarifi, I.M. and Gorji, M.R., 2019. Investigating the effects of
surface treatments on adhesion properties of protective coatings on carbon
fiber-reinforced composite laminates. Surface and Coatings Technology,
p.125006.
-
Alarifi, I.M., 2019.
Investigation the conductivity of carbon fiber composites focusing on
measurement techniques under dynamic and static loads. Journal of
Materials Research and Technology.
-
Tlili, I., Osman, M.,
Barhoumi, E.M., Alarifi, I.M, Abo-Khalil, A.G., Praveen, R.P. and Sayed,
K., 2019. Performance enhancement of a humidification–dehumidification
desalination system. Journal of Thermal Analysis and Calorimetry,
pp.1-11.
-
Tlili, I., Osman, M., Alarifi,
I., Belmabrouk, H., Shafee, A. and Li, Z., 2019. Performance enhancement of a
multi-effect desalination plant: A thermodynamic investigation. Physica
A: Statistical Mechanics and its Applications, p.122535.
-
Mahanthesh, B., Animasaun,
I.L., Rahimi-Gorji, M. and Alarifi, I.M., 2019. Quadratic convective
transport of dusty Casson and dusty Carreau fluids past a stretched surface
with nonlinear thermal radiation, convective condition and non-uniform heat
source/sink. Physica A: Statistical Mechanics and its Applications,
p.122471.
-
Kumar, K.G., Avinash, B.S.,
Rahimi-Gorji, M. and Alarifi, I.M., 2019. Optical and electrical
properties of Ti1-XSnXO2 nanoparticles. Journal of Molecular Liquids,
p.111556.
-
Adesanya, S.O., Onanaye, A.S.,
Adeyemi, O.G., Rahimi-Gorji, M. and Alarifi, I.M., 2019. Evaluation of
heat irreversibility in couple stress falling liquid films along heated inclined
substrate. Journal of Cleaner Production, p.117608.
-
Hajizadeh, A., Shah, N.A.,
Shah, S.I.A., Animasaun, I.L., Rahimi-Gorji, M. and Alarifi, I.M., 2019.
Free convection flow of nanofluids between two vertical plates with damped
thermal flux. Journal of Molecular Liquids, p.110964.
-
Asadi, A., Alarifi, I.M.,
Ali, V. and Nguyen, H.M., 2019. An Experimental Investigation on the Effects of
Ultrasonication Time on Stability and Thermal Conductivity of MWCNT-water
Nanofluid: Finding the Optimum Ultrasonication Time. Ultrasonics
Sonochemistry, p.104639.
-
Souayeh, B., Reddy, M.G.,
Sreenivasulu, P., Poornima, T., Rahimi-Gorji, M. and Alarifi, I.M., 2019.
Comparative analysis on non-linear radiative heat transfer on MHD Casson
nanofluid past a thin needle. Journal of Molecular Liquids, 284,
pp.163-174.
-
Chinni, G., Alarifi,
I.M., Rahimi-Gorji, M. and Asmatulu, R., 2019. Investigating the effects of
process parameters on microalgae growth, lipid extraction, and stable
nanoemulsion productions. Journal of Molecular Liquids,
p.111308.
-
EL-Bagory, T.M., Alarifi,
I.M. and Younan, M.Y., Prediction of Mechanical Properties for Curved Dumbbell
Shaped Specimen at Different Orientation Angles of Ring Hoop Tension
Test. Advanced Engineering Materials.
-
Alarifi, I.M., Alkouh, A.B.,
Ali, V., Nguyen, H.M. and Asadi, A., 2019. On the rheological properties of
MWCNT-TiO2/oil hybrid nanofluid: An experimental investigation on the effects
of shear rate, temperature, and solid concentration of nanoparticles. Powder
Technology.
-
Akermi, M., Jaballah,
N., Alarifi, I.M., Rahimi-Gorji, M., Chaabane, R.B., Ouada, H.B. and
Majdoub, M., 2019. Synthesis and characterization of a novel hydride polymer
P-DSBT/ZnO nano-composite for optoelectronic applications. Journal of
Molecular Liquids, 287, p.110963.
-
Alarifi, I.M., Abokhalil,
A.G., Osman, M., Lund, L.A., Ayed, M.B., Belmabrouk, H. and Tlili, I., 2019.
MHD Flow and Heat Transfer over Vertical Stretching Sheet with Heat Sink or
Source Effect. Symmetry, 11(3), p.297.
-
Swarna, V.S., Alarifi,
I.M., Khan, W.A. and Asmatulu, R., 2019. Enhancing fire and mechanical
strengths of epoxy nanocomposites for metal/metal bonding of aircraft aluminum
alloys. Polymer Composites.
-
Alarifi, I.M., Khan, W.S. and Asmatulu, R., 2018. Synthesis of electrospun
polyacrylonitrile-derived carbon fibers and comparison of properties with bulk
form. PloS one, 13(8), p.e0201345.
-
Alarifi, I.M., Alharbi, A.,
Khan, W.S, Swindle, A. and Asmatulu, R. “Thermal, Electrical and Surface
Properties of Electrospun Polyacrylonitrile Nanofibers for Structural Health
Monitoring,” Materials, 2015, Vol. 8, pp. 7017-7031.