Wear; Artificial Joints; CoCrMo; Hardness; Roughness - Articles

The role of hardness and roughness on the wear of different CoCrMo counterfaces on UHMWPE for artificial joints (Articles)

Victor A. González-Mora, Michael Hoffmann, Rien Stroosnijder, F. Javier Gil

Journal of Biomedical Science and Engineering Vol.4 No.10, October 17, 2011

DOI: 10.4236/jbise.2011.410081 5,187 Downloads 10,333 Views Citations
Influence of different CoCrMo counterfaces on wear in UHMWPE for artificial joints (Articles)

Victor A. González-Mora, Michael Hoffmann, Rien Stroosnijder, Eduardo Espinar, José Maria Llamas, Mariano Fernández-Fairén, Francisco Javier Gil

Journal of Biomedical Science and Engineering Vol.4 No.5, May 17, 2011

DOI: 10.4236/jbise.2011.45047 5,336 Downloads 11,261 Views Citations
Uni- and multidirectional wear resistance of different crosslinking degrees in UHMWPE for artificial joints (Articles)

V.A. González-Mora, M. Hoffmann, R. Stroosnijder, E. Espinar, J.M. Llamas, M. Fernández-Fairén, F.J. Gil

Journal of Biomedical Science and Engineering Vol.4 No.4, April 20, 2011

DOI: 10.4236/jbise.2011.44035 4,790 Downloads 10,093 Views Citations
Microstructure, Mechanical Properties (Strength and Hardness) and Wear Behavior of Chilled Aluminum Alloy (LM-13) Reinforced with Titanium Carbide (TiC) Metal Matrix Composites (Articles)

Joel Hemanth, K. Arasukumar

Journal of Materials Science and Chemical Engineering Vol.7 No.7, July 23, 2019

DOI: 10.4236/msce.2019.77007 764 Downloads 2,478 Views Citations
The Effect of Detergents on the Appearance of Automotive Clearcoat Systems Studied in an Outdoor Weathering Test (Articles)

Mohammad S. Alsoufi, Tahani M. Bawazeer, Mohammed W. Alhazmi, Sufyan Azam

Materials Sciences and Applications Vol.8 No.7, July 3, 2017

DOI: 10.4236/msa.2017.87036 1,371 Downloads 4,398 Views Citations
Studies on Mechanical and Wear Properties of Al6061/Beryl Composites (Articles)

Reddappa Hosur Reddappa, Kitakanur Ramareddy Suresh, Hollakere Basavaraj Niranjan, Kestur Gundappa Satyanarayana

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.7, July 25, 2012

DOI: 10.4236/jmmce.2012.117056 6,748 Downloads 9,852 Views Citations
Effect of Silicon Additions on the Wear Properties of Grey Cast Iron (Articles)

Johnson O. Agunsoye, Talabi S. Isaac, Olumuyiwa I. Awe, Afemefuna T. Onwuegbuzie

Journal of Minerals and Materials Characterization and Engineering Vol.1 No.2, March 29, 2013

DOI: 10.4236/jmmce.2013.12012 9,191 Downloads 14,121 Views Citations
Comparative Study of the Impact of Corundum Particle Contaminants Size on Wear and Fatigue Life of Grease Lubricated Ball Bearings (Articles)

D. Koulocheris, A. Stathis, Th. Costopoulos, G. Gyparakis

Modern Mechanical Engineering Vol.3 No.4, November 5, 2013

DOI: 10.4236/mme.2013.34023 9,783 Downloads 29,663 Views Citations
A Study of Porosity Effect on Tribological Behavior of Cast Al A380M and Sintered Al 6061 Alloys (Articles)

Avijit Sinha, Zoheir Farhat

Journal of Surface Engineered Materials and Advanced Technology Vol.5 No.1, December 26, 2014

DOI: 10.4236/jsemat.2015.51001 6,044 Downloads 8,084 Views Citations
This article belongs to the Special Issue on Surface and Interface of Materials
Metallurgical Analysis of Brake Blocks (Articles)

Mathioro Fall, Fadel Niang, Olivier Hubert, Mamadou Babacar Ndiaye

Open Journal of Metal Vol.7 No.1, March 29, 2017

DOI: 10.4236/ojmetal.2017.71001 1,638 Downloads 3,182 Views Citations
Appraisal of Surface Modified AISI 316 L Stainless Steels by Plasma and Solid Nitriding Techniques (Articles)

R. Guardian, I. Rosales-Cadena, J. L. Valle-Mata, J. Pereyra-Hernández, O. Ocampo

Materials Sciences and Applications Vol.11 No.7, July 17, 2020

DOI: 10.4236/msa.2020.117032 735 Downloads 2,135 Views Citations
Property Comparison of Golden Adornments with Different Characteristics Based on XRD (Articles)

Yijie Zhu, Danjing Hu, Qianyun Lu, Xuejun Yan, Qiujin Peng, Xu Zhang

Open Access Library Journal Vol.10 No.3, March 17, 2023

DOI: 10.4236/oalib.1109874 83 Downloads 824 Views Citations
Synthesis and Characterization of Cu-Co-Mn Alloys for Aeronautic Applications: Microstructural and Mechanical Performance (Articles)

Rene Guardia-Tapia, Juan Antonio Ruiz-Ochoa, Isai Rosales-Cadena

Materials Sciences and Applications Vol.17 No.4, April 2, 2026

DOI: 10.4236/msa.2026.174007 31 Downloads 241 Views Citations
Dry Sliding Wear Behavior of Aluminum 6063 Composites Reinforced with TiB₂ Particles (Articles)

K. Krishnamurthy, Mengistu Ashebre, J. Venkatesh, B. Suresha

Journal of Minerals and Materials Characterization and Engineering Vol.5 No.2, March 31, 2017

DOI: 10.4236/jmmce.2017.52007 1,892 Downloads 4,325 Views Citations
Evaluate the Effects of Various Surface Roughness on the Tribological Characteristics under Dry and Lubricated Conditions for Al-Si Alloy (Articles)

Riyadh A. Al-Samarai, Haftirman, Khairel Rafezi Ahmad, Y. Al-Douri

Journal of Surface Engineered Materials and Advanced Technology Vol.2 No.3, July 25, 2012

DOI: 10.4236/jsemat.2012.23027 8,152 Downloads 13,235 Views Citations
Machinability Study of Al-5Cu-TiB₂ In-situ Metal Matrix Composites Fabricated by Flux-assisted Synthesis (Articles)

A. Mahamani

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.13, November 1, 2011

DOI: 10.4236/jmmce.2011.1013097 4,143 Downloads 6,672 Views Citations
A Contact Model for Establishment of Hip Joint Implant Wear Metrics (Articles)

Mohammad Hodaei, Kambiz Farhang, Nazanin Maani

Journal of Biomedical Science and Engineering Vol.7 No.4, March 20, 2014

DOI: 10.4236/jbise.2014.74026 5,441 Downloads 8,590 Views Citations
Experimentation on Tool Wear and Surface Roughness in AISI D2 Steel Turning with WC Insert (Articles)

N. López-Luiz, O. Jiménez Alemán, F. Alvarado Hernández, M. Montoya Dávila, V. H. Baltazar-Hernández

Modern Mechanical Engineering Vol.8 No.3, August 29, 2018

DOI: 10.4236/mme.2018.83014 1,475 Downloads 3,902 Views Citations
Numerical and Experimental Study of the Roughness Effects on Mechanical Properties of AISI316L by Nanoindentation (Articles)

Ling Chen, Aylin Ahadi, Jinming Zhou, Jan-Eric Ståhl

Modeling and Numerical Simulation of Material Science Vol.4 No.4, October 10, 2014

DOI: 10.4236/mnsms.2014.44017 5,608 Downloads 7,412 Views Citations
Influence of Abrasive Waterjet Machining Parameters on the Surface Texture Quality of Carrara Marble (Articles)

Mohammad S. Alsoufi, Dhia K. Suker, Mohammed W. Alhazmi, Sufyan Azam

Journal of Surface Engineered Materials and Advanced Technology Vol.7 No.2, April 20, 2017

DOI: 10.4236/jsemat.2017.72003 2,576 Downloads 5,679 Views Citations

First <12 3 ...>Last

	customer@scirp.org
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies