Tool Wear - Articles - Scientific Research Publishing

Simulation-Based Analysis and Intuitive Visualization of the Cutting Edge Load in Micromilling of Hardened Steel (Articles)

Petra Kersting, Dirk Biermann, Eugen Krebs

Engineering Vol.4 No.9, September 28, 2012

DOI: 10.4236/eng.2012.49068 5,318 Downloads 7,919 Views Citations
Influence of Deep Cryogenic Treatment (DCT) on Thermo Mechanical Performance of AISI H13 Tool Steel (Articles)

Valmik Bhawar, Shreyans Khot, Prakash Kattire, Mohan Mehta, Rajkumar Singh

Journal of Materials Science and Chemical Engineering Vol.5 No.1, January 16, 2017

DOI: 10.4236/msce.2017.51013 4,227 Downloads 6,569 Views Citations
Analysis of the Tool Condition Monitoring System Using Fuzzy Logic and Signal Processing (Articles)

Chidambaram Ramesh Kannan, Palani Padmanabhan

Circuits and Systems Vol.7 No.9, July 28, 2016

DOI: 10.4236/cs.2016.79232 1,794 Downloads 3,146 Views Citations
Prediction of Wearing of Cutting Tools Using Real Time Machining Parameters and Temperature Using Rayleigh-Ham Method (Articles)

Jean Nyatte Nyatte, Fabrice Alban Epee, Wilba Christophe Kikmo, Samuel Batambock, Claude Valéry Ngayihi Abbe, Robert Nzengwa

Modern Mechanical Engineering Vol.13 No.2, May 31, 2023

DOI: 10.4236/mme.2023.132003 329 Downloads 1,127 Views Citations
Tool Wear Classification Using Fuzzy Logic for Machining of Al/SiC Composite Material (Articles)

V. Kalaichelvi, R. Karthikeyan, D. Sivakumar, V. Srinivasan

Modeling and Numerical Simulation of Material Science Vol.2 No.2, April 16, 2012

DOI: 10.4236/mnsms.2012.22003 5,993 Downloads 13,512 Views Citations
Analysis of Tool Wear Rate in Drilling Operation using Scanning Electron Microscope (SEM) (Articles)

Anil Jindal

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.1, January 20, 2012

DOI: 10.4236/jmmce.2012.111004 10,252 Downloads 13,382 Views Citations
Effect of Machining Parameters on Tool Wear and Nodal Temperature in Hard Turning of AISI D3 Steel (Articles)

Varaprasad Bhemuni, Srinivasa Rao Chelamalasetti, Siva Prasad Kondapalli

Open Access Library Journal Vol.1 No.6, September 16, 2014

DOI: 10.4236/oalib.1100627 1,562 Downloads 2,824 Views Citations
Experimentation on Tool Wear and Surface Roughness in AISI D2 Steel Turning with WC Insert (Articles)

N. López-Luiz, O. Jiménez Alemán, F. Alvarado Hernández, M. Montoya Dávila, V. H. Baltazar-Hernández

Modern Mechanical Engineering Vol.8 No.3, August 29, 2018

DOI: 10.4236/mme.2018.83014 1,478 Downloads 3,911 Views Citations
Influence of Coolant in Machinability of Titanium Alloy (Ti-6Al-4V) (Articles)

Muthukrishnan Namb, Davim Paulo

Journal of Surface Engineered Materials and Advanced Technology Vol.1 No.1, March 17, 2011

DOI: 10.4236/jsemat.2011.11002 11,199 Downloads 23,652 Views Citations
Intelligent Tool Management Strategies for Automated Manufacturing Systems (Articles)

D. Ganeshwar Rao, C. Patvardhan, Ranjit Singh

Intelligent Control and Automation Vol.2 No.4, November 3, 2011

DOI: 10.4236/ica.2011.24046 6,643 Downloads 10,758 Views Citations
Design of Bibliographic Data Management Tool for Small Book Corners (Articles)

Yuhan Cai

Open Access Library Journal Vol.10 No.12, December 29, 2023

DOI: 10.4236/oalib.1110989 72 Downloads 480 Views Citations
Influence of different CoCrMo counterfaces on wear in UHMWPE for artificial joints (Articles)

Victor A. González-Mora, Michael Hoffmann, Rien Stroosnijder, Eduardo Espinar, José Maria Llamas, Mariano Fernández-Fairén, Francisco Javier Gil

Journal of Biomedical Science and Engineering Vol.4 No.5, May 17, 2011

DOI: 10.4236/jbise.2011.45047 5,341 Downloads 11,309 Views Citations
Effects of Gas Nitriding on the Mechanical and Corrosion Properties of SACM 645 Steel (Articles)

Shu-Hung Yeh, Liu-Ho Chiu, Heng Chang

Engineering Vol.3 No.9, September 23, 2011

DOI: 10.4236/eng.2011.39116 10,303 Downloads 17,554 Views Citations
Wear Characteristics in Al-SiC Particulate Composites and the Al-Si Piston Alloy (Articles)

Z. Hasan, R. K. Pandey, D.K. Sehgal

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.14, November 25, 2011

DOI: 10.4236/jmmce.2011.1014104 5,859 Downloads 8,821 Views Citations
Statistical Analysis for the Abrasive Wear Behavior of Al 6061 (Articles)

Mohd Shadab Khan, Zahir Hasan, Yaqoob Ali Ansari

Journal of Minerals and Materials Characterization and Engineering Vol.2 No.4, July 23, 2014

DOI: 10.4236/jmmce.2014.24034 3,671 Downloads 5,638 Views Citations
New Ways to Address Competition Challenges in Digital Markets: Reflections and Enlightenment of the EU’s Proposal for a New Competition Tool (Articles)

Qichao Dong

Beijing Law Review Vol.14 No.3, September 21, 2023

DOI: 10.4236/blr.2023.143075 302 Downloads 1,162 Views Citations
Influence of Material Condition on the Dry Sliding Wear Behavior of Spring Steels (Articles)

K. V. Arun, K.V. Swetha

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.4, March 28, 2011

DOI: 10.4236/jmmce.2011.104023 6,619 Downloads 8,995 Views Citations
Solid Particle Erosion Behaviour of TiN Coating on AISI 4140 Steel (Articles)

J. R. Laguna-Camacho, J. E. Escalante-Martínez, R. Cruz-Vicencio, J. V. Méndez-Méndez, I. Arzate-Vázquez, I. Hernández-Romero, M. Vite-Torres

Journal of Surface Engineered Materials and Advanced Technology Vol.4 No.1, January 16, 2014

DOI: 10.4236/jsemat.2014.41001 5,712 Downloads 9,169 Views Citations
Sliding Wear Study on the Valve-Seat Insert Contact (Articles)

Edgar E. Vera-Cardenas, Roger Lewis, Tom Slatter

Open Journal of Applied Sciences Vol.7 No.2, February 16, 2017

DOI: 10.4236/ojapps.2017.72004 2,232 Downloads 4,118 Views Citations
Role of Metallic Nanofillers on Mechanical and Tribological Behaviour of Carbon Fabric Reinforced Epoxy Composites (Articles)

G. S. Divya, B. Suresha

Materials Sciences and Applications Vol.9 No.9, August 17, 2018

DOI: 10.4236/msa.2018.99054 1,037 Downloads 2,656 Views Citations

First <12 3 ...>Last

	customer@scirp.org
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies