Thin-Wall Injection Molding - Articles - Scientific Research Publishing

Effect of Molecular Weight and Molecular Distribution on Skin Structure and Shear Strength Distribution near the Surface of Thin-Wall Injection Molded Polypropylene (Articles)

Keisuke Maeda, Koji Yamada, Kazushi Yamada, Masaya Kotaki, Hiroyuki Nishimura

Open Journal of Organic Polymer Materials Vol.6 No.1，January 7, 2016

DOI: 10.4236/ojopm.2016.61001 4,280 Downloads 5,580 Views Citations
The Relationship between Bulk Property and Property Distribution in Thin-Wall Injection Molded PP at Different Molecular Weight and Molecular Weight Distribution (Articles)

Keisuke Maeda, Koji Yamada, Kazushi Yamada, Masaya Kotaki, Hiroyuki Nishimura

Advances in Materials Physics and Chemistry Vol.6 No.1，January 19, 2016

DOI: 10.4236/ampc.2016.61001 4,454 Downloads 5,494 Views Citations
Processed Low NO_x Fly Ash as a Filler in Plastics (Articles)

X. Huang, J.Y. Hwang, J.M. Gillis

J. of Minerals and Materials Characterization and Eng. Vol.2 No.1，June 12, 2003

DOI: 10.4236/jmmce.2003.21002 7,416 Downloads 9,946 Views Citations
Withdraw: Improvement on Adhesion Properties of Insert Injection Molding Composites: Effect of Inserted Parts, Adhesive Lengths and Injection Conditions (Articles)

Badin Pinpathomrat, Hiroyuki Hamada

Open Journal of Composite Materials Vol.7 No.4，July 27, 2017

DOI: 10.4236/ojcm.2017.74013 1,280 Downloads 2,713 Views Citations
This article belongs to the Special Issue on Composite Interface and Damages
The Comparison of the Mechanical Characteristics of ABS Using Three Different Plastic Production Techniques (Articles)

Yousuf Pasha Shaik, Naresh Kumar Naidu, Venkat Reddy Yadavalli, Manish Reddy Muthyala

Open Access Library Journal Vol.10 No.5，May 24, 2023

DOI: 10.4236/oalib.1110097 301 Downloads 4,951 Views Citations
Simulation and Injection Molding of Ring-Shaped Polymer Bonded Nickel Braze Metal Composite Preforms Based on Rheological and Thermal Analyses (Articles)

Stefan Kirchberg

Open Journal of Composite Materials Vol.3 No.2，April 15, 2013

DOI: 10.4236/ojcm.2013.32004 5,754 Downloads 9,425 Views Citations
A Novel Statistical Analysis for Residual Stress in Injection Molding (Articles)

Faisal Alkaabneh, Mahmoud Barghash, Yousef Abdullat

American Journal of Operations Research Vol.6 No.1，January 29, 2016

DOI: 10.4236/ajor.2016.61012 4,518 Downloads 6,074 Views Citations
The Determination of Interfacial Shear Strength in Short Fiber Reinforced Poly Ethylene Terephthalate by Kelly-Tyson Theory (Articles)

Wiranphat Thodsaratpreeyakul, Putinun Uawongsuwan, Akio Kataoka, Takanori Negoro, Hiroyuki Hamada

Open Journal of Composite Materials Vol.7 No.4，July 27, 2017

DOI: 10.4236/ojcm.2017.74015 2,264 Downloads 4,219 Views Citations
This article belongs to the Special Issue on Composite Interface and Damages
Properties of Recycled-Polyethylene Terephthalate/Polycarbonate Blend Fabricated by Vented Barrel Injection Molding (Articles)

Wiranphat Thodsaratpreeyakul, Putinun Uawongsuwan, Takanori Negoro

Materials Sciences and Applications Vol.9 No.1，January 26, 2018

DOI: 10.4236/msa.2018.91012 1,600 Downloads 4,553 Views Citations
Comparison of DOE Programs (Articles)

Mani Bharadwaj Tirupathi, Yousuf Pasha Shaik, Jens Schuster

Open Access Library Journal Vol.11 No.3，March 29, 2024

DOI: 10.4236/oalib.1111200 74 Downloads 438 Views Citations
Strength Characteristics of Inoculated and Nodularised Thin Wall Ductile Iron Castings (Articles)

Ezenwanyi Fidelia Ochulor, Samson Oluropo Adeosun, Mohammed Olawale Hakeem Amuda, Sanmbo Adewale Balogun

J. of Minerals and Materials Characterization and Eng. Vol.3 No.2，March 16, 2015

DOI: 10.4236/jmmce.2015.32012 4,839 Downloads 6,355 Views Citations
A Study on Release Property through Self Coating in LSR Injection Process (Articles)

Sang-Gweon Kim, Hyung-Pil Park, Jeong-Won Lee, Yong-Jun Jeon, Baeg-Soon Cha

Advances in Materials Physics and Chemistry Vol.5 No.7，July 31, 2015

DOI: 10.4236/ampc.2015.57024 3,944 Downloads 5,011 Views Citations
Development of Eco-Friendly Composite Material for Pinewood Replacement Using Agricultural Waste (Articles)

Praveen Kumar Tammali, Jens Schuster, Yousuf Pasha Shaik

Open Access Library Journal Vol.11 No.12，December 11, 2024

DOI: 10.4236/oalib.1112619 51 Downloads 340 Views Citations
Dependence of Lower Molding Temperature Limit and Molding Time on Molding Mechanism in Dental Thermoforming (Articles)

Mutsumi Takahashi, Masatoshi Takeuchi

Materials Sciences and Applications Vol.15 No.9，September 18, 2024

DOI: 10.4236/msa.2024.159024 27 Downloads 138 Views Citations
Theory of Flexural Shear, Bending and Torsion for a Thin-Walled Beam of Open Section (Articles)

David W. A. Rees, Abdelraouf M. Sami Alsheikh

World Journal of Mechanics Vol.14 No.3，March 29, 2024

DOI: 10.4236/wjm.2024.143003 56 Downloads 464 Views Citations
Research Progress of the Modification in Sulfur Concrete (Articles)

Xuemin You

Materials Sciences and Applications Vol.12 No.7，July 16, 2021

DOI: 10.4236/msa.2021.127024 608 Downloads 2,336 Views Citations
Effect of Thermal Shrinkage of Extruded Sheet on Mouthguard Thickness: Influence of Model Undercut (Articles)

Mutsumi Takahashi, Yogetsu Bando

Materials Sciences and Applications Vol.13 No.1，January 29, 2022

DOI: 10.4236/msa.2022.131004 186 Downloads 765 Views Citations
Effect of Molding Technique That Move Model Position Just before Formation in Production of Laminated Mouthguard (Articles)

Mutsumi Takahashi, Yogetsu Bando

Materials Sciences and Applications Vol.14 No.6，June 15, 2023

DOI: 10.4236/msa.2023.146020 156 Downloads 568 Views Citations
Appropriate Needle Lengths Determined Using Ultrasonic Echograms for Intramuscular Injections in Japanese Infants (Articles)

Tetsuo Nakayama, Urara Kohdera, Motoko Fujino, Toshihiro Tanaka, Keitaro Yatabe, Tomoyuki Hashiguchi, Tomohide Sato, Minoru Kino

Open Journal of Pediatrics Vol.6 No.2，June 6, 2016

DOI: 10.4236/ojped.2016.62024 5,790 Downloads 9,197 Views Citations
Mg/Al complex oxides-A new type of solid basic catalyst for epoxidation (Articles)

Heng Miao, Shi-Chao Xu, Hai-Nan Wang, Wen-Xia Qin, Lin Lin Zhang, Ji-Mei Zhang, Juan Yang, Zhao Dai, Guo Zheng, En-Qi Tang

Journal of Biomedical Science and Engineering Vol.3 No.2，March 1, 2010

DOI: 10.4236/jbise.2010.32028 4,953 Downloads 9,502 Views Citations

<12 3 ...>

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies