Modelling and Simulation - Articles - Scientific Research Publishing

Modelling and Simulation of Solidification Phenomena during Additive Manufacturing of Bulk Metallic Glass Matrix Composites (BMGMC)—A Brief Review and Introduction of Technique (Articles)

Muhammad Musaddique Ali Rafique

Journal of Encapsulation and Adsorption Sciences Vol.8 No.2，June 25, 2018

DOI: 10.4236/jeas.2018.82005 1,757 Downloads 4,613 Views Citations
A Guide to Population Modelling for Simulation (Articles)

Leif Gustafsson, Mikael Sternad

Open Journal of Modelling and Simulation Vol.4 No.2，April 27, 2016

DOI: 10.4236/ojmsi.2016.42007 3,552 Downloads 7,473 Views Citations
Guidelines for Optimization of the Absorber Layer Energy Gap for High Efficiency Cu(In,Ga)Se₂ Solar Cells (Articles)

N. Severino, N. Bednar, N. Adamovic

Journal of Materials Science and Chemical Engineering Vol.6 No.4，April 29, 2018

DOI: 10.4236/msce.2018.64015 1,195 Downloads 3,282 Views Citations
Experimental Testing and Validation of the Mathematical Model for a Self-Humidifying PEM Fuel Cell (Articles)

Ibrahim M. Saleh, Rashid Ali, Hongwei Zhang

Journal of Materials Science and Chemical Engineering Vol.6 No.4，April 30, 2018

DOI: 10.4236/msce.2018.64019 1,256 Downloads 3,262 Views Citations
An Agent Based Model to Analyze the Effects of Traffic Signal Timing on Vehicle Throughput in Inclement Weather (Articles)

Michael Duff, Robert D. McLeod

Open Access Library Journal Vol.5 No.5，May 24, 2018

DOI: 10.4236/oalib.1104523 511 Downloads 1,339 Views Citations
Modelling Impacts of Climate Change on Maize (Zea mays L.) Growth and Productivity: A Review of Models, Outputs and Limitations (Articles)

Benjamin Kipkemboi Kogo, Lalit Kumar, Richard Koech, Philip Langat

Journal of Geoscience and Environment Protection Vol.7 No.8，August 13, 2019

DOI: 10.4236/gep.2019.78006 1,270 Downloads 3,752 Views Citations
Off-Design Modelling of a Turbo Jet Engine with Operative Afterburner (Articles)

O. O. Ighodaro, E. I. Aburime, A. A. Erameh

Open Journal of Energy Efficiency Vol.11 No.3，September 19, 2022

DOI: 10.4236/ojee.2022.113007 353 Downloads 2,354 Views Citations
StochSD: A Full Potential CSS Language for Dynamic and Stochastic Modelling, Simulation and Statistical Analysis (Articles)

Leif Gustafsson, Erik Gustafsson, Magnus Gustafsson

Open Journal of Modelling and Simulation Vol.10 No.2，April 29, 2022

DOI: 10.4236/ojmsi.2022.102012 195 Downloads 1,237 Views Citations
The Full Potential of Continuous System Simulation Modelling (Articles)

Leif Gustafsson, Mikael Sternad, Erik Gustafsson

Open Journal of Modelling and Simulation Vol.5 No.4，October 31, 2017

DOI: 10.4236/ojmsi.2017.54019 1,980 Downloads 4,770 Views Citations
Artificial Intelligence in the Estimation of Patch Dimensions of Rectangular Microstrip Antennas (Articles)

Vandana Vikas Thakare, Pramod Singhal

Circuits and Systems Vol.2 No.4，October 24, 2011

DOI: 10.4236/cs.2011.24046 5,801 Downloads 10,873 Views Citations
A Simulation Study of the Steam Reforming of Methaneina Fixed-Bed Reactor (Articles)

Fernando Antôniode Araújo Silva, Kenia Carvalho Mendes, Jornandes Dias da Silva

Engineering Vol.8 No.4，April 29, 2016

DOI: 10.4236/eng.2016.84021 3,530 Downloads 6,812 Views Citations
Groundwater Utilisation for Energy Production in the Nordic Environment: An Energy Simulation and Hydrogeological Modelling Approach (Articles)

Teppo Arola, Jarkko Okkonen, Juha Jokisalo

Journal of Water Resource and Protection Vol.8 No.6，May 27, 2016

DOI: 10.4236/jwarp.2016.86053 2,389 Downloads 3,614 Views Citations
This article belongs to the Special Issue on Water Project Research
Reverse Engineering Based Methodology for Redesigning Contour Milling Tools (Articles)

A. P. Valerga, M. Batista, J. Salguero, A. Gomez-Parra, M. Marcos

World Journal of Engineering and Technology Vol.4 No.3D，October 20, 2016

DOI: 10.4236/wjet.2016.43D025 1,359 Downloads 2,403 Views Citations
Numerical Feasibility Study of a Wax Cold Flow Approach for Subsea Tie-In Flowlines Using a 1D Mechanistic Multiphase Flow Simulator (Articles)

Diana González, Milan Stanko, Michael Golan

Engineering Vol.10 No.3，March 29, 2018

DOI: 10.4236/eng.2018.103008 1,212 Downloads 2,461 Views Citations
The Development of a Simulated Sediment Dosing Apparatus for Deposition Research in Wastewater Collection Systems (Articles)

David Campbell, Sean Mushin, Craig Saunders

Journal of Water Resource and Protection Vol.10 No.5，May 16, 2018

DOI: 10.4236/jwarp.2018.105026 886 Downloads 1,572 Views Citations
Reduction of Environmental Impact of Drum Machine Washing (Articles)

Pieter Broer van der Weg (Peter)

Journal of Applied Mathematics and Physics Vol.8 No.1，January 8, 2020

DOI: 10.4236/jamp.2020.81011 749 Downloads 2,032 Views Citations
Simulation of a Laboratory Scale Ball Mill via Discrete Element Method Modelling (Articles)

Mohsen Mhadhbi

Advances in Materials Physics and Chemistry Vol.11 No.10，October 25, 2021

DOI: 10.4236/ampc.2021.1110016 546 Downloads 2,330 Views Citations
Performance Analysis of the Flywheel Assembly Design Using SolidWorks Modeling and Simulation Capabilities (Articles)

Abdelbaki Abdallah, Seif Eddine Bendaoudi, Houcine Naim, Samir Habibi

Smart Grid and Renewable Energy Vol.13 No.5，May 31, 2022

DOI: 10.4236/sgre.2022.135007 222 Downloads 1,259 Views Citations
Simulation of High Density Pedestrian Flow: A Microscopic Model (Articles)

Mohamed H. Dridi

Open Journal of Modelling and Simulation Vol.3 No.3，June 19, 2015

DOI: 10.4236/ojmsi.2015.33009 4,858 Downloads 6,426 Views Citations
Analytical solution of coupled non-linear second order differential equations in enzyme kinetics (Articles)

Govindhan Varadharajan, Lakshmanan Rajendran

Natural Science Vol.3 No.6，June 22, 2011

DOI: 10.4236/ns.2011.36063 8,613 Downloads 19,155 Views Citations

<12 3 ...>

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies