Machining - Articles - Scientific Research Publishing

The Extremely Efficient New Model in Milling of Complicated Surfaces in 5-Axis Machining for 3-Dimensional Contact (Articles)

Yi Lou, Huran Liu, Bo Tan

World Journal of Engineering and Technology Vol.6 No.3，July 31, 2018

DOI: 10.4236/wjet.2018.63038 907 Downloads 1,458 Views Citations
This article belongs to the Special Issue on Machine Tool and Manufacturing
Development Trend of NC Machining Accuracy Control Technology for Aeronautical Structural Parts (Articles)

Qingchun Xiong, Qinghua Zhou

World Journal of Engineering and Technology Vol.8 No.3，July 17, 2020

DOI: 10.4236/wjet.2020.83022 814 Downloads 2,092 Views Citations
Taguchi Full Factorial Design of Experiments Optimisation of Cutting Parameters for Energy Efficiency and Surface Roughness during the Dry Turning of EN19 Material (Articles)

Nicholas Tayisepi, Albert Nkulumo Mnkandla, Godfrey Tigere, Oscar Gwatidzo, Winnie Mutenhabundo, Emmanuel Ndala, Lovelace Makakatanwa Wagoneka

World Journal of Engineering and Technology Vol.12 No.2，May 30, 2024

DOI: 10.4236/wjet.2024.122028 170 Downloads 611 Views Citations
This article belongs to the Special Issue on Modern Manufacturing Technology
The P40 Cutting Tool Wear Modelization Machining Fk20MnCr5 (Articles)

Idriss Amara, Embarek Ferkous, Fayçal Bentaleb, Razika Aouad

Engineering Vol.3 No.9，September 23, 2011

DOI: 10.4236/eng.2011.39114 5,286 Downloads 9,163 Views Citations
Synthesis and Characterization of Ultrafine Grained 304 Stainless Steel through Machining (Articles)

V. Senthilkumar, K. Lenin

J. of Minerals and Materials Characterization and Eng. Vol.10 No.5，April 20, 2011

DOI: 10.4236/jmmce.2011.105034 6,435 Downloads 7,839 Views Citations
Forgeability and Machinability of Stir Cast Aluminum Alloy Metal Matrix Composites (Articles)

Rabindra Behera, S. Das, D. Chatterjee, G. Sutradhar

J. of Minerals and Materials Characterization and Eng. Vol.10 No.10，August 10, 2011

DOI: 10.4236/jmmce.2011.1010072 8,122 Downloads 11,896 Views Citations
Application and Analysis of Force Control Strategies to Deburring and Grinding (Articles)

Frank Domroes, Carsten Krewet, Bernd Kuhlenkoetter

Modern Mechanical Engineering Vol.3 No.2A，June 21, 2013

DOI: 10.4236/mme.2013.32A002 6,204 Downloads 10,172 Views Citations
This article belongs to the Special Issue on Machinery Manufacturing and Its Automation
Research on the Deformation of Turbine Blades at Machining (Articles)

Masu Yamada, Keiji Sonoya, Takahito Sobayashi, Hiroshi Satoh

Energy and Power Engineering Vol.8 No.1，January 29, 2016

DOI: 10.4236/epe.2016.81001 5,371 Downloads 6,520 Views Citations
Fixture Design to Supplement Machining and Fuel Cell Education (Articles)

Yeong Ryu, Hazem Tawfik

Engineering Vol.9 No.5，May 27, 2017

DOI: 10.4236/eng.2017.95022 1,786 Downloads 2,932 Views Citations
Error Prediction in Industrial Robot Machining: Optimization Based on Stiffness and Accuracy Limit (Articles)

Yair Shneor, Vladimir Chapsky

Engineering Vol.13 No.6，June 30, 2021

DOI: 10.4236/eng.2021.136024 561 Downloads 1,531 Views Citations
Prediction of Wearing of Cutting Tools Using Real Time Machining Parameters and Temperature Using Rayleigh-Ham Method (Articles)

Jean Nyatte Nyatte, Fabrice Alban Epee, Wilba Christophe Kikmo, Samuel Batambock, Claude Valéry Ngayihi Abbe, Robert Nzengwa

Modern Mechanical Engineering Vol.13 No.2，May 31, 2023

DOI: 10.4236/mme.2023.132003 208 Downloads 686 Views Citations
Grey Relational Optimization of Turning Parameters in Dry Machining of Austenitic Stainless Steel Using Zr Based Coated Tools (Articles)

Kaushik Vijaya Prasad, Kishore Triambak Kashyap, Madapat Job Richard, Posina Gerard Prabhu Rao, Abhishek Rajole, Rabara Hiren

Open Journal of Applied Sciences Vol.7 No.7，July 14, 2017

DOI: 10.4236/ojapps.2017.77027 1,118 Downloads 2,148 Views Citations
Influence of Laser-Induced Bubble Formation on Laser Chemical Machining (Articles)

Marcel Simons, Tim Radel, Raj Shanta Kajsaravally, Frank Vollertsen

J. of Surface Engineered Materials and Advanced Technology Vol.10 No.2，March 20, 2020

DOI: 10.4236/jsemat.2020.102002 584 Downloads 1,485 Views Citations
Process Window Expansion of Laser Chemical Machining by Using High Pressure (Articles)

Marcel Simons, Tim Radel, Frank Vollertsen

Materials Sciences and Applications Vol.11 No.5，May 8, 2020

DOI: 10.4236/msa.2020.115020 423 Downloads 1,062 Views Citations
Study of Stability and Vibration Reduction in Multi-Tool Ultrasonic Machining under Simultaneous Primary and Internal Resonance (Articles)

Yaser Salah Hamed, Mohamed Syed Abd Elkader, Hamdi Mahmoud Genedi

Applied Mathematics Vol.3 No.1，January 4, 2012

DOI: 10.4236/am.2012.31001 5,888 Downloads 11,069 Views Citations
Multi-Objective Optimization Using Genetic Algorithms of Multi-Pass Turning Process (Articles)

Abdelouahhab Jabri, Abdellah El Barkany, Ahmed El Khalfi

Engineering Vol.5 No.7，July 15, 2013

DOI: 10.4236/eng.2013.57072 5,769 Downloads 9,555 Views Citations
A Branch-and-Bound Based Heuristic Algorithm for Minimizing Makespan in Machining-Assembly Flowshop Scheduling (Articles)

Kazuko Morizawa

Engineering Vol.6 No.13，December 8, 2014

DOI: 10.4236/eng.2014.613081 2,856 Downloads 3,815 Views Citations
Neural Network Modeling and Prediction of Surface Roughness in Machining Aluminum Alloys (Articles)

N. Fang, N. Fang, P. Srinivasa Pai, N. Edwards

Journal of Computer and Communications Vol.4 No.5，May 13, 2016

DOI: 10.4236/jcc.2016.45001 2,893 Downloads 4,413 Views Citations
Fabrication of Micro Structures by Ultrashort Voltage Pulse Electrical Discharge Machining (Articles)

Chenxue Wang, Weiyu He, Yan Xiao

J. of Minerals and Materials Characterization and Eng. Vol.6 No.2，March 26, 2018

DOI: 10.4236/jmmce.2018.62017 1,267 Downloads 2,878 Views Citations
Simulation Analysis of Surface Roughness for Milling Process (Articles)

Bai Liu, Jixuan Yuan, Zhenjiu Zhang

Natural Science Vol.11 No.5，May 9, 2019

DOI: 10.4236/ns.2019.115014 1,062 Downloads 2,349 Views Citations

<12 >

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies