Department of Production Engineering, National Institute of Technology,Tiruchirappalli - 15, India - Articles

Performance Enhancement of the Proton Exchange Membrane Fuel Cell Using Pin Type Flow Channel with Porous Inserts (Articles)

Vaibhav Pal, P. Karthikeyan, R. Anand

Journal of Power and Energy Engineering Vol.3 No.5，May 5, 2015

DOI: 10.4236/jpee.2015.35001 3,672 Downloads 5,171 Views Citations
Mechanically Alloyed Carbon Nanotubes (CNT) Reinforced Nanocrystalline AA 4032: Synthesis and Characterization (Articles)

M.S. Senthil Saravanan, S.P. Kumaresh Babu, K. Sivaprasad

J. of Minerals and Materials Characterization and Eng. Vol.9 No.11，November 20, 2010

DOI: 10.4236/jmmce.2010.911074 6,061 Downloads 8,160 Views Citations
Influence of Microstructure and Experimental Parameters on Mechanical and Wear Properties of Al-TiC Surface Composite by FSP Route (Articles)

S. Jerome, S. Govind Bhalchandra, S.P. Kumaresh Babu, B. Ravisankar

J. of Minerals and Materials Characterization and Eng. Vol.11 No.5，May 18, 2012

DOI: 10.4236/jmmce.2012.115035 5,552 Downloads 7,303 Views Citations
Resistivity Stability of Ga Doped ZnO Thin Films with Heat Treatment in Air and Oxygen Atmospheres (Articles)

T. Prasada Rao, M. C. Santhosh Kumar

Journal of Crystallization Process and Technology Vol.2 No.2，April 24, 2012

DOI: 10.4236/jcpt.2012.22010 6,903 Downloads 13,984 Views Citations
Synthesis, Characterization and Third Order Non Linear Optical Properties of Metallo Organic Chromophores (Articles)

Nallamuthu Ananthi, Umesh Balakrishnan, Sivan Velmathi, Krishna Balakrishna Manjunath, Govindarao Umesh

Optics and Photonics Journal Vol.2 No.1，March 28, 2012

DOI: 10.4236/opj.2012.21006 6,022 Downloads 11,164 Views Citations
Compact Metamaterial Antenna with High Directivity for Bio-Medical Systems (Articles)

Bose Anandhimeena, Palavesanadar Thiruvalar Selvan, Singaravelu Raghavan

Circuits and Systems Vol.7 No.12，October 31, 2016

DOI: 10.4236/cs.2016.712334 1,996 Downloads 3,621 Views Citations
A Hybrid Associative Classification Model for Software Development Effort Estimation (Articles)

S. Saraswathi, N. Kannan

Circuits and Systems Vol.7 No.6，May 17, 2016

DOI: 10.4236/cs.2016.76071 1,975 Downloads 2,833 Views Citations
Finite Element Analysis (FEA) for the Beam-Column Joint Subjected to Cyclic Loading Was Performed Using ANSYS (Articles)

B. Venkatesan, R. Ilangovan, P. Jayabalan, N. Mahendran, N. Sakthieswaran

Circuits and Systems Vol.7 No.8，June 15, 2016

DOI: 10.4236/cs.2016.78138 5,717 Downloads 10,119 Views Citations
Improvement of High Temperature Wear Resistance of AISI 316 ASS through NiCrBSiCFe Plasma Spray Coating (Articles)

N. L . Parthasarathi, Muthukannan Duraiselvam

J. of Minerals and Materials Characterization and Eng. Vol.9 No.7，July 20, 2010

DOI: 10.4236/jmmce.2010.97047 7,435 Downloads 9,753 Views Citations
A Comparative Study on the Milling Speed for the Synthesis of Nano-Structured Al 6063 Alloy Powder by Mechanical Alloying (Articles)

Hafeez Ahamed, V. Senthil Kumar

J. of Minerals and Materials Characterization and Eng. Vol.10 No.6，May 10, 2011

DOI: 10.4236/jmmce.2011.106038 6,608 Downloads 8,195 Views Citations
Effect of Secondary Processing and Nanoscale Reinforcement on the Mechanical Properties of Al-TiC Composites (Articles)

V. Senthilkumar, A. Balaji, Hafeez Ahamed

J. of Minerals and Materials Characterization and Eng. Vol.10 No.14，November 25, 2011

DOI: 10.4236/jmmce.2011.1014102 5,102 Downloads 7,778 Views Citations
Effect of Heat Treatment Processes on the Mechanical Properties of Medium Carbon Steel (Articles)

T. Senthilkumar, T. K. Ajiboye

J. of Minerals and Materials Characterization and Eng. Vol.11 No.2，February 20, 2012

DOI: 10.4236/jmmce.2012.112011 17,430 Downloads 26,639 Views Citations
Multiple Response Optimization of Three-Body Abrasive Wear Behaviour of Graphite Filled Carbon-Epoxy ComPosites Using Grey-Based Taguchi Approach (Articles)

K.M. Subbaya, N. Rajendra, Y.S. Varadarajan, B. Suresha

J. of Minerals and Materials Characterization and Eng. Vol.11 No.9，September 25, 2012

DOI: 10.4236/jmmce.2012.119082 5,905 Downloads 7,967 Views Citations
Synthesis and Characterization of Ultrafine Grained 304 Stainless Steel through Machining (Articles)

V. Senthilkumar, K. Lenin

J. of Minerals and Materials Characterization and Eng. Vol.10 No.5，April 20, 2011

DOI: 10.4236/jmmce.2011.105034 6,370 Downloads 7,740 Views Citations
Review to EDM by Using Water and Powder-Mixed Dielectric Fluid (Articles)

Sharanjit Singh, Arvind Bhardwaj

J. of Minerals and Materials Characterization and Eng. Vol.10 No.2，February 20, 2011

DOI: 10.4236/jmmce.2011.102014 16,330 Downloads 23,560 Views Citations
Parametric Optimization of PMEDM Process using Chromium Powder Mixed Dielectric and Triangular Shape Electrodes (Articles)

Kuldeep Ojha, R. K. Garg, K. K. Singh

J. of Minerals and Materials Characterization and Eng. Vol.10 No.11，September 12, 2011

DOI: 10.4236/jmmce.2011.1011083 8,692 Downloads 11,506 Views Citations
Experimental Methods of Determining Fracture Toughness of Fiber Reinforced Polymer Composites under Various Loading Conditions (Articles)

M.S. Sham Prasad, C.S. Venkatesha, T. Jayaraju

J. of Minerals and Materials Characterization and Eng. Vol.10 No.13，November 1, 2011

DOI: 10.4236/jmmce.2011.1013099 18,157 Downloads 24,226 Views Citations
Modeling a Controller for an Articulated Robotic Arm (Articles)

Rajeev Agrawal, Koushik Kabiraj, Ravi Singh

Intelligent Control and Automation Vol.3 No.3，August 30, 2012

DOI: 10.4236/ica.2012.33023 16,049 Downloads 21,177 Views Citations
Mechanical Properties of Potassium Titanate Whisker Reinforced Epoxy Resin Composites (Articles)

M. Sudheer, K. M. Subbaya, Dayananda Jawali, Thirumaleshwara Bhat

J. of Minerals and Materials Characterization and Eng. Vol.11 No.2，February 20, 2012

DOI: 10.4236/jmmce.2012.112016 6,985 Downloads 9,641 Views Citations
Modified NSGA-II for a Bi-Objective Job Sequencing Problem (Articles)

Susmita Bandyopadhyay

Intelligent Information Management Vol.4 No.6，November 20, 2012

DOI: 10.4236/iim.2012.46036 4,207 Downloads 6,981 Views Citations

<12 3 ...>

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies