Department of Mechanical Engineering, Siddaganga Institute of Technology, Tumkur, India - Articles

Corrosion Behavior of Cu-Zn-Ni Shape Memory Alloys (Articles)

S. Sathish, U. S. Mallik, T. N. Raju

J. of Minerals and Materials Characterization and Eng. Vol.1 No.2，March 28, 2013

DOI: 10.4236/jmmce.2013.12010 5,925 Downloads 8,658 Views Citations
Microstructure and Shape Memory Effect of Cu-Zn-Ni Shape Memory Alloys (Articles)

Sathish S, U. S. Mallik, T. N. Raju

J. of Minerals and Materials Characterization and Eng. Vol.2 No.2，March 14, 2014

DOI: 10.4236/jmmce.2014.22011 6,936 Downloads 9,758 Views Citations
Heat Transfer Analysis during External Chilling of Composite Material Castings through Experimental and Finite Element (FE) Modelling (Articles)

Joel Hemanth

Modeling and Numerical Simulation of Material Science Vol.4 No.1，January 2, 2014

DOI: 10.4236/mnsms.2014.41001 5,266 Downloads 8,331 Views Citations
Effect of Metallic, Nonmetallic, Water Cooled and Cryogenic Chills on Pearlite Content (PC), Eutectic Cell Count (ECC) and Grain Size (GS) of Hypo Eutectic Nickel Alloyed Cast Iron (Articles)

Joel Hemanth

Modeling and Numerical Simulation of Material Science Vol.7 No.1，February 28, 2017

DOI: 10.4236/mnsms.2017.71001 2,136 Downloads 3,315 Views Citations
Scanning Electron Microscopy (SEM) Analysis and Hardness of Diffusion Bonded Titanium-Titanium and Titanium-Copper Plates with Static Force and without Interlayers (Articles)

Joel Hemanth

Open Journal of Composite Materials Vol.7 No.2，April 30, 2017

DOI: 10.4236/ojcm.2017.72007 1,400 Downloads 3,315 Views Citations
Taguchi Technique for the Simultaneous Optimization of Tribological Parameters in Metal Matrix Composite (Articles)

Kumar.T.R. Hemanth, R.P. Swamy, T.K. Chandrashekar

J. of Minerals and Materials Characterization and Eng. Vol.10 No.12，October 10, 2011

DOI: 10.4236/jmmce.2011.1012090 6,256 Downloads 8,597 Views Citations
Development of Nickel Alloy Reinforced with Fused SiO2 Chilled Composites and Evaluation of Thermal Properties (Thermal Conductivity & Coefficient of Thermal Expansion) and Temperature Distribution by Finite Element Analysis (FEA) (Articles)

Joel Hemanth

Open Journal of Composite Materials Vol.7 No.5，September 15, 2017

DOI: 10.4236/ojcm.2017.75017 1,323 Downloads 2,691 Views Citations
Catalytic Synthesis of Salicylate Esters over Cordierite Honeycomb Coated with Mo (VI)/ZrO₂ (Articles)

Manjunatha Shyamsundar, Sathgatta Z. M. Shamshuddin, Nabisab Mujawar Mubarak, Srinivas R. Prathap

Modern Research in Catalysis Vol.2 No.2，April 24, 2013

DOI: 10.4236/mrc.2013.22006 3,721 Downloads 7,510 Views Citations
Experimental, Mathematical and Finite Element Analysis (FEA) of Temperature Distribution through Rectangular Fin with Circular Perforations (Articles)

Joel Hemanth

Modeling and Numerical Simulation of Material Science Vol.7 No.2，April 28, 2017

DOI: 10.4236/mnsms.2017.72002 1,873 Downloads 4,232 Views Citations
In Vitro Anti-HIV Activity of Partially Purified Coumarin(s) Isolated from Fungal Endophyte, Alternaria Species of Calophyllum inophyllum (Articles)

Melappa Govindappa, Kavya C. Hemmanur, S. Nithin, Chandrappa Chinna Poojari, Gopalakrishna Bhat, K. Channabasava

Pharmacology & Pharmacy Vol.6 No.7，July 29, 2015

DOI: 10.4236/pp.2015.67034 2,897 Downloads 4,074 Views Citations
[1-(4-Nitrobenzyl)-2-butyl-4-chloro-1H-imidazol-5-yl]-4, 5-dihydro-1-phenyl-1H-pyrazole: Synthesis, Anti-Inflammatory and Analgesic Activities (Articles)

S. Sreenivasa, B. J. Shankar

Open Journal of Medicinal Chemistry Vol.3 No.2，June 20, 2013

DOI: 10.4236/ojmc.2013.32007 5,055 Downloads 8,776 Views Citations
Influence of Boron Fiber Powder and Graphite Reinforcements on Physical and Mechanical Properties of Aluminum 2024 Alloy Fabricated by Stir Casting (Articles)

H. S. Kumaraswamy, Vinjamuri Bharat, T. Krishna Rao

J. of Minerals and Materials Characterization and Eng. Vol.7 No.3，April 19, 2019

DOI: 10.4236/jmmce.2019.73008 943 Downloads 2,013 Views Citations
Influence of Water Ageing on Mechanical Properties of CaCO₃ Filler Filled Epoxy Resin and Sansevieria/Carbon Fiber Reinforced Composites (Articles)

Naveed Anjum, Bheemappa Suresha, Somanahally Lingaiah Ajit Prasad

Open Journal of Composite Materials Vol.9 No.1，January 18, 2019

DOI: 10.4236/ojcm.2019.91001 1,287 Downloads 2,816 Views Citations
Comparative Residual Stress Analysis in Welded Joints Using Both Experimental and Numerical Techniques (Articles)

Rajshekhar B. Aloor, Ramakrishna H V, Nagabhushana Musalammagri

J. of Minerals and Materials Characterization and Eng. Vol.7 No.4，June 20, 2019

DOI: 10.4236/jmmce.2019.74011 1,000 Downloads 1,924 Views Citations
Modeling a Controller for an Articulated Robotic Arm (Articles)

Rajeev Agrawal, Koushik Kabiraj, Ravi Singh

Intelligent Control and Automation Vol.3 No.3，August 30, 2012

DOI: 10.4236/ica.2012.33023 16,193 Downloads 21,485 Views Citations
Energy Parameter Correlation of Failure Life Data between Cyclic Ball Indentation and Low Cycle Fatigue (Articles)

Aneesh Bangia, Raghu V. Prakash

Open Journal of Metal Vol.2 No.1，March 30, 2012

DOI: 10.4236/ojmetal.2012.21005 4,529 Downloads 9,583 Views Citations
Machinability Study of Al-5Cu-TiB₂ In-situ Metal Matrix Composites Fabricated by Flux-assisted Synthesis (Articles)

A. Mahamani

J. of Minerals and Materials Characterization and Eng. Vol.10 No.13，November 1, 2011

DOI: 10.4236/jmmce.2011.1013097 3,922 Downloads 6,192 Views Citations
Effect of Micro Size Cenosphere Particles Reinforcement on Tribological Characteristics of Vinylester Composites under Dry Sliding Conditions (Articles)

Santram Chauhan, Sunil Thakur

J. of Minerals and Materials Characterization and Eng. Vol.11 No.10，October 31, 2012

DOI: 10.4236/jmmce.2012.1110092 7,391 Downloads 9,848 Views Citations
Finite Element Modeling of Stress Strain Curve and Micro Stress and Micro Strain Distributions of Titanium Alloys— A Review (Articles)

Gangi Setti Srinivasu, Narasimha Rao Raja

J. of Minerals and Materials Characterization and Eng. Vol.11 No.10，October 31, 2012

DOI: 10.4236/jmmce.2012.1110094 7,149 Downloads 9,905 Views Citations
Study of various molar crown designs and their assessment (Articles)

Rashmi Uddanwadiker

Journal of Biomedical Science and Engineering Vol.5 No.11，November 26, 2012

DOI: 10.4236/jbise.2012.511077 3,934 Downloads 5,849 Views Citations

<12 3 ...>

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

	+1 323-425-8868
	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies