Tensile strength and Ductility. - Articles - Scientific Research Publishing

Effects of Heat Treatment on the Mechanical Properties of Rolled Medium Carbon Steel (Articles)

O.O. Daramola, B.O. Adewuyi, I.O. Oladele

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.8, August 20, 2010

DOI: 10.4236/jmmce.2010.98050 20,315 Downloads 28,265 Views Citations
Rolling, Partial and Full Annealing of 6061 Characterization of Microstructure, Tensile Strengths and Ductility (Articles)

Wei Zhang

Materials Sciences and Applications Vol.7 No.9, September 1, 2016

DOI: 10.4236/msa.2016.79040 2,155 Downloads 5,356 Views Citations
Mechanical and Electrical Properties of Some Sn-Zn Based Lead-Free Quinary Alloys (Articles)

Shihab Uddin, Md. Abdul Gafur, Suraya Sabrin Soshi, Mohammad Obaidur Rahman

Materials Sciences and Applications Vol.15 No.7, July 22, 2024

DOI: 10.4236/msa.2024.157015 192 Downloads 879 Views Citations
A Talc-Based Cement-Poor Concrete for Sealing Boreholes in Rock (Articles)

Roland Pusch, Laurence Warr, Georg Grathoff, Alireza Pourbakhtiar, Sven Knutsson, Mohammed Hatem Mohammed

Engineering Vol.5 No.3, March 19, 2013

DOI: 10.4236/eng.2013.53036 5,852 Downloads 9,034 Views Citations
Effect of Secondary Processing and Nanoscale Reinforcement on the Mechanical Properties of Al-TiC Composites (Articles)

V. Senthilkumar, A. Balaji, Hafeez Ahamed

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.14, November 25, 2011

DOI: 10.4236/jmmce.2011.1014102 5,566 Downloads 8,686 Views Citations
Effect of Strain Rate on Tensile Behavior of Sn-9Zn-xAg-ySb; {(x, y) = (0.2, 0.6), (0.2, 0.8), (0.6, 0.2), (0.8, 0.2)} Lead-Free Solder Alloys (Articles)

Shihab Uddin, Md. Abdul Gafur, Mohammad Obaidur Rahman

Materials Sciences and Applications Vol.14 No.4, April 13, 2023

DOI: 10.4236/msa.2023.144016 302 Downloads 1,137 Views Citations
Computational Approach to Modelling Fracture Behaviour of Polypropylene/Talc Composites (Articles)

Chinedum Ogonna Mgbemena, ObuoraAnozie Okoye

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.8, August 20, 2012

DOI: 10.4236/jmmce.2012.118076 5,962 Downloads 7,896 Views Citations
Valorization of Pozzolans as Partial Additive of Portland Cement: A Case of Pozzolans from the Localities of Foumbot, Penja and Tombel (Cameroon) (Articles)

Mambou Ngueyep Luc Leroy, Njimboum Aboubakar Sidiki, Tchakouteu Mbakop Théophile, Mache Jacques Richard

Journal of Minerals and Materials Characterization and Engineering Vol.7 No.1, January 21, 2019

DOI: 10.4236/jmmce.2019.71002 1,625 Downloads 3,505 Views Citations
Assessment of Physical and Mechanical Properties of Concrete Produced from Various Portland Cement Brands (Articles)

Asal Soltani, Salim Khoso, Manthar Ali Keerio, Antonio Formisano

Open Journal of Composite Materials Vol.9 No.4, September 24, 2019

DOI: 10.4236/ojcm.2019.94020 1,894 Downloads 5,178 Views Citations
Botulinum Toxin A, Effect on Tensile Strength of Skin Wounds; Animal Study (Articles)

Carlos A. Gonzalez-Alvarado, Juan Garzon-Muvdi, Roxanna Perez-Garmendia, Victoria Ramirez, Luz Graciela Cervantes, Adriana Rodriguez-Gomez, Rodrigo Davila-Diaz, Cuahutemoc Marquez-Espriella

Journal of Biosciences and Medicines Vol.8 No.2, January 22, 2020

DOI: 10.4236/jbm.2020.82002 957 Downloads 1,948 Views Citations
Effects of Heat Treatment on Strength and Ductility of Rolled and Forged Aluminum 6063 Alloy (Articles)

S. O. Adeosun, S.A. Balogun, O.I. Sekunowo, M.A. Usman

Journal of Minerals and Materials Characterization and Engineering Vol.9 No.8, August 20, 2010

DOI: 10.4236/jmmce.2010.98054 10,331 Downloads 15,044 Views Citations
Effect of Heat Treatment on Mechanical Properties of Al-1.5Cu-9.5Zn-3Mg Rapidly Solidified Alloy (Articles)

El Said Gouda, Emad Makboul Ahmed, Nabih Lotfi Tawfik

Materials Sciences and Applications Vol.1 No.4, October 29, 2010

DOI: 10.4236/msa.2010.14031 5,770 Downloads 10,202 Views Citations
Tensile Strength of Squeeze Cast Carbon Fibers Reinforced Al-Si Matrix Composites (Articles)

Ahmed A. Moosa, Kahtan K. Al-Khazraji, Osama S. Muhammed

Journal of Minerals and Materials Characterization and Engineering Vol.10 No.2, February 20, 2011

DOI: 10.4236/jmmce.2011.102009 6,810 Downloads 9,621 Views Citations
Studies on Mechanical and Wear Properties of Al6061/Beryl Composites (Articles)

Reddappa Hosur Reddappa, Kitakanur Ramareddy Suresh, Hollakere Basavaraj Niranjan, Kestur Gundappa Satyanarayana

Journal of Minerals and Materials Characterization and Engineering Vol.11 No.7, July 25, 2012

DOI: 10.4236/jmmce.2012.117056 6,767 Downloads 9,907 Views Citations
Investigation of the Weldability of Austanitic Stainless Steel (Articles)

E. M. Anawa, M. F. Bograrah, S. B. Salem

Materials Sciences and Applications Vol.5 No.8, June 30, 2014

DOI: 10.4236/msa.2014.58066 4,163 Downloads 6,242 Views Citations
This article belongs to the Special Issue on Heat Treating of Materials
Development of Double Cloth Structure to Facilitate Versatile Application of Denim Fabric (Articles)

Rubel Alam, Tarikul Islam, Ahsan Haider, Nazmul Haque, Jahidul Islam, Mohammad Zakaria

Journal of Textile Science and Technology Vol.5 No.1, February 26, 2019

DOI: 10.4236/jtst.2019.51002 1,647 Downloads 3,850 Views Citations
Studies on the Effects of Bentonite (Nanoclay) on the Mechanical Properties of High-Density Polyethylene (Articles)

Jerome Anokwu

Journal of Minerals and Materials Characterization and Engineering Vol.7 No.6, November 18, 2019

DOI: 10.4236/jmmce.2019.76029 957 Downloads 2,592 Views Citations
Development and Characterization of Hybrid Film Made of Hydroxyapatite, Poly Vinyl Alcohol and Gelatin for Biomedical Application (Articles)

Farzana Rashid, Suraya Sabrin Soshi, Md. Abdul Gafur

Materials Sciences and Applications Vol.15 No.9, September 12, 2024

DOI: 10.4236/msa.2024.159022 132 Downloads 736 Views Citations
Effect of Al on Zn and Mg on Zn-Al as Pb Free Solder Alloy (Articles)

Safayet Rafid, Suraya Sabrin Soshi, Al Fahad Ahmed, Md. Abdul Gafur

Materials Sciences and Applications Vol.16 No.5, May 27, 2025

DOI: 10.4236/msa.2025.165015 112 Downloads 665 Views Citations
Influence of Degree of Cold-Drawing on the Mechanical Properties of Low Carbon Steel (Articles)

Nurudeen A. Raji, Oluleke O. Oluwole

Materials Sciences and Applications Vol.2 No.11, November 16, 2011

DOI: 10.4236/msa.2011.211208 9,715 Downloads 19,418 Views Citations

First <12 3 ...>Last

	customer@scirp.org
	+86 18163351462 (WhatsApp)
	1655362766
	SCIRP WeChat

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies