Finish Rolling - Articles - Scientific Research Publishing

Formation of X-120 M Line Pipe through J-C-O-E Technique (Articles)

Jai Dev Chandel, Nand Lal Singh

Engineering Vol.3 No.4，April 8, 2011

DOI: 10.4236/eng.2011.34046 12,109 Downloads 21,886 Views Citations
Effect of Special Finishes on the Functional Properties of Cotton Fabrics (Articles)

Kawser Parveen Chowdhury

Journal of Textile Science and Technology Vol.4 No.2，May 9, 2018

DOI: 10.4236/jtst.2018.42003 1,612 Downloads 6,255 Views Citations
Assessment of undergraduate students’ tooth preparation for full veneer cast restorations (Articles)

Nuha El-Mubarak, Neamat Abu-Bakr, Osama Omer, Yahia Ibrahim

Open Journal of Stomatology Vol.4 No.2，February 6, 2014

DOI: 10.4236/ojst.2014.42008 5,844 Downloads 8,907 Views Citations
Finite Element Simulation on the Roller Pressure during the Rolling of Glass (Articles)

Geng Tie, Hujin Zhong

Journal of Materials Science and Chemical Engineering Vol.5 No.1，January 24, 2017

DOI: 10.4236/msce.2017.51020 2,929 Downloads 3,688 Views Citations
The Safety of Water Supplied at Njala University, Njala Campus (Articles)

Abubakarr S. Mansaray, Josephus F. Borsuah, Alhaji B. Gogra, Binty P. Fofana, Bashiru M. Koroma

Natural Resources Vol.8 No.2，February 8, 2017

DOI: 10.4236/nr.2017.82006 1,596 Downloads 2,725 Views Citations
Impact of Different Water Repellent Finishes on Cotton Double Jersey Fabrics (Articles)

Kawser Parveen Chowdhury

Journal of Textile Science and Technology Vol.4 No.3，August 9, 2018

DOI: 10.4236/jtst.2018.43006 1,650 Downloads 4,489 Views Citations
Rolling Deformations and Residual Stresses of Large Circular Saw Body (Articles)

Bolesław Porankiewicz, Jari Parantainen, Karolina Ostrowska

Engineering Vol.2 No.9，October 15, 2010

DOI: 10.4236/eng.2010.29094 4,532 Downloads 9,330 Views Citations
Comprehensive Study on Machinability of Titanium Composite (Articles)

Basim A. Khidhir

Journal of Materials Science and Chemical Engineering Vol.4 No.2，February 1, 2016

DOI: 10.4236/msce.2016.42001 3,724 Downloads 4,718 Views Citations
Micro Crack of Aluminum Sheet During Cold Rolling (Articles)

Chaohui Zhang, Sisi Liu, Chenhui Zhang

World Journal of Mechanics Vol.1 No.4，September 7, 2011

DOI: 10.4236/wjm.2011.14022 8,048 Downloads 17,500 Views Citations
High Temperature Oxidation and Hot Corrosion Behaviour of 9Cr 1Mo Ferritic Cold Rolled Steel in Air at 900°C under Cyclic Condition (Articles)

Amarish K. Shukla, Dinesh Gond, M. Bharadwaj, D. Puri

J. of Minerals and Materials Characterization and Eng. Vol.10 No.11，September 12, 2011

DOI: 10.4236/jmmce.2011.1011081 5,438 Downloads 7,646 Views Citations
Integrating Strategic and Tactical Rolling Stock Models with Cyclical Demand (Articles)

Michael F. Gorman

Journal of Transportation Technologies Vol.3 No.2，April 29, 2013

DOI: 10.4236/jtts.2013.32016 3,576 Downloads 5,477 Views Citations
Numerical Simulation of Fluid-Structure Interaction Method on Dynamic Movement of Leukocyte in Flow Chamber (Articles)

Wenjiao Li

Advances in Pure Mathematics Vol.3 No.9，December 17, 2013

DOI: 10.4236/apm.2013.39094 2,669 Downloads 4,242 Views Citations
Mechanical and Microstructural Evaluation of Plastically Deformed Brass (Articles)

Muideen Adebayo Bodude, Ibrahim Momohjimoh, Ruth Nkiruka Nnaji

Materials Sciences and Applications Vol.6 No.12，December 21, 2015

DOI: 10.4236/msa.2015.612112 5,709 Downloads 7,461 Views Citations
Designing of Hot Strip Rolling Mill Control System (Articles)

Yajun Wu

World Journal of Engineering and Technology Vol.4 No.3，August 5, 2016

DOI: 10.4236/wjet.2016.43040 2,912 Downloads 4,741 Views Citations
The Rolling Wheel Equations without Magic: A Combined Slip-Stiction Approach by the Udwadia-Kalaba Formulation with Constraints Relaxation for a Smooth Simulation (Articles)

Bukoko Ikoki

Journal of Transportation Technologies Vol.11 No.3，June 24, 2021

DOI: 10.4236/jtts.2021.113024 136 Downloads 529 Views Citations
CFD Simulation of Particles Mixing and Segregation in a Rotary Coating Disk: Influence of Drag Models and Restitution Coefficient (Articles)

Salma Awad Nouh, Ku Zilati Bt Ku Shaari, Lau Kok Keong, Shafirah Bt Samsuri, Tigabwa Yosef Ahmed

Open Journal of Applied Sciences Vol.12 No.3，March 14, 2022

DOI: 10.4236/ojapps.2022.123020 147 Downloads 603 Views Citations
The Longitudinal Dynamics of a Road Vehicle: A New Multibody Approach for the Equations of the Rolling Wheel with Constraints Relaxation and Traction Reaction Saturation (Articles)

Bukoko Ikoki

Open Access Library Journal Vol.9 No.10，October 31, 2022

DOI: 10.4236/oalib.1109420 13 Downloads 140 Views Citations
Comparative Analysis of Technical Parameters of Different Knitted Structures (Jersey, Pique and Lacoste) with or without Lycra/Spandex (Articles)

Faridul Islam Ovi, Rownak Jahan Shova

Journal of Textile Science and Technology Vol.8 No.1，February 28, 2022

DOI: 10.4236/jtst.2022.81007 113 Downloads 2,410 Views Citations
Thermal Model of High-Speed Spindle Units (Articles)

Jeong-Du Kim, Igor Zverv, Keon-Beom Lee

Intelligent Information Management Vol.2 No.5，June 1, 2010

DOI: 10.4236/iim.2010.25036 5,836 Downloads 11,488 Views Citations
Modeling of Slab Induction Heating in Hot Rolling by FEM (Articles)

Ruibin Mei, Changsheng Li, Xianghua Liu, Bao Li, Bin Han

Engineering Vol.3 No.4，April 8, 2011

DOI: 10.4236/eng.2011.34041 6,042 Downloads 11,169 Views Citations

<12 3 ...>

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

	customer@scirp.org
	+86 18163351462(WhatsApp)
	1655362766

	Paper Publishing WeChat

Browse Subjects

Publish with us

Home

About SCIRP

Service

Policies