Reduction of the Additives Migration from Poly Vinyl Chloride Films by the Use of Permanent Plasticizers

M. O. Boussoum, N. Belhaneche-Bensemra

1Faculté des Sciences de la Nature et de la Vie, Université de Tiaret, Algérie 2Ecole Nationale Polytechnique, BP 182, El-Harrach, Alger, Algérie.
Ecole Nationale Polytechnique, BP 182, El-Harrach, Alger, Algérie.

DOI: 10.4236/gep.2014.24008                

Abstract

This aim of this work is to study the partial replacement of the plasticizer ordinarily used di-octyl phtalate (DOP) by the permanent plasticizers ethylene-vinyl-acetate (EVA) and acrylonytrile-bu- tadiene-styrene (ABS) in order to reduce migration of additives initially contents in polyvinyl chloride (PVC) stabilized with expoxidized sunflower oil (ESO). Migration tests with agitation to 40°C in sunflower oil and ethanol at 15% were made. Migration phenomenon was studied on the basis of the PVC samples mass variations, Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM) analysis. The results showed the effectiveness of the approach consisting in the partial substitution of DOP by plasticizers of polymeric nature. The following order concerning the migration of additives was found: DOP (40) > DOP:EVA > (30/10) DOP:ABS (30/10). Furthermore, all the measured values of overall migrations were lower than the maximum allowable overall migration: 10 mg-dm^-2.

Keywords

PVC, Migration, DOP, Permanent Plasticizers, Mass Variation, FTIR Spectroscopy, SEM

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1]	Atek, D., & Belhaneche-Bensemra, N. (2005). FTIR Investigation of the Specific Migration of Additives from Rigid Poly (Vinyl Chloride). European Polymer Journal, 41, 707-714. http://dx.doi.org/10.1016/j.eurpolymj.2004.10.043 [Google Scholar] [CrossRef]
[2]	Atek, D., Belhaneche-Bensemra, N., & Turki, M. (2010). Migration of Epoxidized Sunflower Oil and Dioctyl Phthalate from Rigid and Plasticized Poly(Vinyl Chloride). International Journal of Polymeric Materials, 59, 342-352. http://dx.doi.org/10.1080/00914030903478909 [Google Scholar] [CrossRef]
[3]	Audic, J. L., Reyx, D., Brosse, J. C., & Poncin-Epaillard, F. (2000). Nouvelles approches pour controler la migration des aditifs dans les emballages alimentaires a base de PVC. Annales des Falsifications, de L’Expertise Chimique, 93, 201-214.
[4]	Belhaneche-Bensemra, N., Zeddam, C., & Ouahmed, S. (2002). Study of the Migration of Additives from Plasticized PVC. Macromolecular Symposia, 180, 191-202. http://dx.doi.org/10.1002/1521-3900(200203)180:1<191::AID-MASY191>3.0.CO;2-U [Google Scholar] [CrossRef]
[5]	Benaniba, M. T., Belhan-eche-Bensemra, N., & Gelbard, G. (2001). Stabilizing Effect of Epoxidized Sunflower Oil on the Thermal Degradation of Poly (Vinyl Chloride). Polymer Degradation and Stability, 74, 501-505. http://dx.doi.org/10.1016/S0141-3910(01)00170-7 [Google Scholar] [CrossRef]
[6]	Boussoum, M. O., Atek, D., & Belhaneche-Bensemra, N. (2006). Interactions between PVC Stabilised with Epoxidized Sunflower Oil and Food Simulants. Polymer Degradation and Stability, 91, 579-584. http://dx.doi.org/10.1016/j.polymdegradstab.2005.05.036 [Google Scholar] [CrossRef]
[7]	Cadogan, D. (2002). Health and Environmental Impact of Phthalates. Plastics Additives Compounding, 4, 28-29. http://dx.doi.org/10.1016/S1464-391X(02)80091-5 [Google Scholar] [CrossRef]
[8]	Conseil Oléicole International (2008). Norme commerciale applicable aux huiles d’olive et aux huiles de grignons.
[9]	Earls, A. O., Axord, I. P., & Braybrook, J. H. (2003). Gas Chromatography Mass Spectrometry Determination of the Migra- tion of Phthalate Plasticizers from Poly Vinyl Chloride Toys and Chilcare Articles. Journal of Chromatography A, 983, 237-246. http://dx.doi.org/10.1016/S0021-9673(02)01736-3 [Google Scholar] [CrossRef]
[10]	Figge, K. (1972). Migration of Additives from Plastics Films into Edible Oils and Fat Simulants. Food and Cosmetics Toxicology, 10, 815-823. http://dx.doi.org/10.1016/S0015-6264(72)80008-7 [Google Scholar] [CrossRef]
[11]	Ito, R., Sechimi, F., Miura, N., Kawagushi, M., Saito, K., & Na-kazawa, H. (2006). Effect of Sterilisation Process on the For- mation of Mono (2-Ethylhexyl) Phthalate from Di (2-Ethylhexyl) Phthalate. Journal of Pharmaceutcal and Biomedical Analysis, 41, 455-460. http://dx.doi.org/10.1016/j.jpba.2005.12.021 [Google Scholar] [CrossRef] [PubMed]
[12]	Krimm, S., Folt, V. L., Shipman, J. J., & Berens, A. R. (1963). Infrared Spectroscopy and Assignment for Polyvinyl Chlo- ride and Deuterated Analogs. Journal of Polymer Science: Part A, 1, 2621-2635.
[13]	Marcilla, A., Garcia, S., & Garcia-Quesada, G.-C. (2004). Study of the Migration of PVC Plasticizers. Journal of Analytical and Applied Pyrolysis, 71, 457-463. http://dx.doi.org/10.1016/S0165-2370(03)00131-1 [Google Scholar] [CrossRef]
[14]	Marcilla, A., Garcia, S., & Garcia-Quesada, G.-C. (2007). Migrability for PVC Plasticizers. Polymer Testing, 27, 221-233. http://dx.doi.org/10.1016/j.polymertesting.2007.10.007 [Google Scholar] [CrossRef]
[15]	Marin, M., Lopez, J., Sanchez, A., Vilaplana, J., & Jimenez, A. (1998). Analysis of Potentially Toxic Plasticizers Used in Toy Manufacturing. Bulletin of Environmental Contamination and Toxicology, 60, 68-73. http://dx.doi.org/10.1007/s001289900592 [Google Scholar] [CrossRef] [PubMed]
[16]	Mersiowsky, J. (2002). Long Term Fate of PVC Products and Their Addi-tives in Landfills. Progress in Polymer Science, 27, 2227-2277. http://dx.doi.org/10.1016/S0079-6700(02)00037-0 [Google Scholar] [CrossRef]
[17]	Murphy, J. (2003). Additives for Plastics Handbook (2nd ed.). Oxford: Elsevier Advanced Technology.
[18]	Oil, L., Hersong, L. S., & Madsen, J. O. (1997). Residential Exposure to Plasticizers and Its Possible Role in the Pathogenesis Asthma. Environmental Health Perspectives, 105, 972-978. http://dx.doi.org/10.1289/ehp.97105972 [Google Scholar] [CrossRef] [PubMed]
[19]	Rahman, M., & Brazel, C. S. (2004). The Plasticizer Market: An Assessment of Traditional Plasticizers and Research Trends to Meet New Challenges. Progress in Polymer Science, 29, 1223-1248. http://dx.doi.org/10.1016/j.progpolymsci.2004.10.001 [Google Scholar] [CrossRef]
[20]	Wang, Q., & Storm, B. K. (2005). Separation and Analysis of Low Molecular Weight Plasticizers, Poly (Vinyl Chloride) Tubes. Polymer Testing, 24, 290-300. http://dx.doi.org/10.1016/j.polymertesting.2004.12.002 [Google Scholar] [CrossRef]
[21]	Wilkinson, C., & Lamb, J.C. (1990). The Potential Health Effects of Phthalates Esters in Children’s Toys: A Review and Risk Assessment. Regulatory Toxicology and Pharmacology, 30, 140-155. http://dx.doi.org/10.1006/rtph.1999.1338 [Google Scholar] [CrossRef] [PubMed]
[22]	Zeddam, C., & Belhaneche-Bensemra, N. (2010). Kinetic Study of the Specific Migration of an Oganotin Heat Stabilizer from Rigid Poly (Vinyl Chloride) into Food Simulants by FTIR Spectroscopy. International Journal of Polymeric Materials, 59, 318-329. http://dx.doi.org/10.1080/00914030903478867 [Google Scholar] [CrossRef]