On the Buckling of Euler Graphene Beams Subject to Axial Compressive Load ()

Mohamed B. M. Elgindi, Dongming Wei, Yeran Soukiassian, Yu Liu

Department of Electrical Engineering, University of New Orleans, Louisiana, USA.

Department of Mathematics, Texas A & M University-Qatar, Doha, Qatar.

Department of Mathematics, University of New Orleans, Louisiana, USA.

**DOI: **10.4236/wjet.2014.22016
PDF
HTML
3,478
Downloads
5,479
Views
Citations

Department of Electrical Engineering, University of New Orleans, Louisiana, USA.

Department of Mathematics, Texas A & M University-Qatar, Doha, Qatar.

Department of Mathematics, University of New Orleans, Louisiana, USA.

In this paper, we consider the buckling of an Euler-Bernoulli graphene beam due to an axial compressive load. We formulate the problem as a non-linear (eigenvalue) two-point boundary value problem, prove some properties of the eigenpairs and introduce a suitable numerical shooting method scheme for approximating them. We present the perturbation and the numerical approximations of the first and second buckling loads and the corresponding shapes.

Keywords

Critical Buckling Load, Graphene, Euler-Bernoulli Beam, Non-Linear Eigenvalue Problem, Shooting Method

Share and Cite:

Elgindi, M. , Wei, D. , Soukiassian, Y. and Liu, Y. (2014) On the Buckling of Euler Graphene Beams Subject to Axial Compressive Load. *World Journal of Engineering and Technology*, **2**, 149-158. doi: 10.4236/wjet.2014.22016.

1. Introduction

It is well-known from materials science, physics, and chemistry perspective, that intense interest in graphene material is developing at an accelerating pace and has recently generated numerous publications and research. Applications and the potential for graphene made structures are abundant. For instance, numerous engineering nanoscale devices that use graphene as basic components, like nanoscale resonators, switches, and valves, are being developed by many industries. Understanding the response of individual graphene structure elements to applied loads is crucially important (see [1] -[9] and the reference there in for a comprehensive list of appli- cations).

The Euler buckling load of simply supported straight elastics beam subject to an end axial compressive load can be modeled by the equation:

(1.1)

with boundary conditions

(1.2)

where is the length of the beam, the Young’s modulus, and the area moment of inertia.

Integrating (1.1) twice gives:

and applying boundary conditions (1.2), we get:.

The boundary value problem (1.1), (1.2), then reduces to:

(1.3)

The general solution of Equation (1.3) is

,

where and are arbitrary constants to be determined so that the boundary conditions are satisfied. This gives a sequence of non-zero (Eigenvalues/functions) solutions:

(1.4)

Furthermore, each eigenvalue of (1.3) is positive and simple, and satisfy. The first eigen- function is called the first buckling mode and the load corresponding to the first eigenvalue is called the critical buckling load. This buckling load is known as Euler’s Buckling load and is widely used in engineering applications.

The buckling analysis presented above is based on the Hooke’s law, relating the stress by: and strain by:, and the assumption that during the deformation, the cross-sections of the beam column remains perpendicular to its center line. These classical results are generalized for material that follow the Hollomon’s law, , with corresponding to Hook’s law. In this case the boundary value pro- blem (1.1), (1.2) is replaced by:

(1.5)

The first eigenvalue of (1.5) is found in [10] , and is given by:

which leads to the critical load:

where is a material constant,

is the generalized area moment of inertia, and

The first eigenfunction is defined in terms the of the generalized sine function, using the no- tation of the two parameter sine function developed in [11] . It is well known that the eigenvalues of (1.5) are all positive, simple and form an increasing sequence to infinity. These facts follow from some well-known results about the eigenvalue problem corresponding to the p-Laplace operator [12] .

The purpose of this paper is to consider the buckling of an Euler-Bernoulli beam made of graphene material acted upon by an axial compressive load, formulate the equilibrium equations and introduce a suitable numerical technique for solving them. We are also interested in examining the dependence of the critical buckling load on the graphene’s quadratic term parameter.

Graphene materialis are shown to be modeled by the following quadratic stress-strain constitutive law (see [2] and [7] ):

(1.6)

where is related to the Young’s modulus by the relation:

where is the material’s ultimate maximal axial stress. We notice that for small strain, the elastic stress dominates in (1.6), while the plastic stress, , becomes prominent with large deformation. The ratio:

is known as the elastoplastic parameter. When this parameter is small the material’s ultimate maximal shear stress is very large, and the elastic behavior dominates.

The eigenvalue problem corresponding to (1.5) for a beam made of graphene is given by:

(1.7)

where we used the following non-dimensional variables and parameters:

and

Note that in the above formulas the z-axis being in the off-plane direction and A is the cross sectional area.

In [13] , it was shown that the eigenvalues of (1.7) form a sequence of positive real numbers which tends to in- finity and that each eigenvalue is simple. In this paper we are concerned with perturbation and numerical ap- proximations of the eigenvalues and the eigen modes and in their dependence on the parameter.

In Section 2, we provide an asymptotic expansion of the first eigenpairs of (1.7) in terms of a perturbation parameter. In Section 3 we verify some properties of the solutions of (1.7). In Section 4 we present the nu- merical approximation of the first two eigen pairs for the grapheme Euler beam.

2. Buckling Analysis of the Graphene Beam

Integrating (1.7) twice, and applying the boundary conditions we obtain the nonlinear eigenvalue problem:

(2.1)

When, (2.1) is reduced to the eigenvalue problem for the Euler elastic beam:

(2.2)

whose first eigenpairs are given by:

(2.3)

We consider the expansions of the solutions of (2.1), and, in terms of in the forms:

(2.4)

We substitute (2.4) in (2.1) and compare the powers of. The zero’s order BVP is (2.2) whose solution is given by (2.3). The first order equation then reads:

(2.5)

whose solvability condition gives

This way we obtain an asymptotic expansion:

(2.6)

valid for small enough, where is the unique solution of the boundary value problem (2.5) given by:

3. Properties of the Eigenvalues and Eigenfunctions

In this section we examine some properties of the solutions of the eigenvalue problem:

(3.1)

We observe that if is an eigenpair of (3.1) for some, then is also an eigenpair of (3.1) corresponding to the same, while is an eigenpair of (3.1) corresponding to, for.

In order to prove some properties that satisfy, we write (3.1) in the equivalent form:

(3.2)

where. We prove the following results.

Theorem 3.1: For every, any eigenpair of of (3.2) satisfies.

Proof: Multiplying both sides of (3.2) by and integrating, we get:

(3.3)

where is a constant of integration. We consider two cases:

Case 1: Assume there is such that. In this case evaluating (3.3) at and

gives:

which implies that. However, implies that. Therefore,.

Case 2: Assume that for. Multiplying (3.2) by and integrating by parts, we get:

which in turn implies that.

Theorem 3.2: For any, any eigenpair of (3.2) must satisfy on.

Proof: Assume that the conclusion of the theorem is false. Then, without loss of generality we can assume that

u has a local maximum at with. Then, and. However, (3.2) gives

which upon evaluation at gives:

which is a contradiction.

Using Theorem 3.2, we will obtain an equivalent boundary value problem to (3.1) which we will use in the next section to construct the numerical solution. Integrating the differential equation in (3.1) two times, and us- ing the boundary conditions, we obtain the boundary value problem:

(3.4)

which we can write as:

(3.5)

where. Since is invertible for, and since any eigenpair of (3.1) satisfies, , it follows that the eigenvalue problems, (3.1) and (3.4) are equivalent. Furthermore,

by differentiating (3.4) we obtain:

(3.6)

Once again, using Theorem (3.2), it follows that the eigenvalue problem (3.6) is equivalent to (3.4) (and hence to (3.1)). In the next section we use the boundary value problem (3.6) to develop the numerical solutions of (3.1) that satisfy the additional constraint:

(3.7)

which in turn ensures that is non-zero.

4. The Numerical Solution

In this section we use the eigenvalue problem

(4.1)

to construct the eigenpairs of (3.1) as functions of the elastoplastic parameter. We do this by treating and as unknown parameters to be determined along with the solution. Therefore, for a given and we integrate the initial value problem:

(4.2)

for, and seek the values of and for which

(4.3)

We use Newton’s method to determine and which satisfy the algebraic system (4.3).

Remarks:

For the first eigenvalue, , we may assume that the corresponding eigenvector satisfies. This allows us to remove the absolute value from the boundary value problem (4.2).

For the second eigenvalue, , we may assume that the corresponding eigenfunction satisfies

for, , and is symmetric about the vertical line.

Therefore, in solving for and its corresponding eigenvector we will solve the systems (4.2), (4.3) over

instead of and use the symmetry property of to obain on.

5. Numerical Results

Our numerical results for are shown in Figures 1-3, while the results for are shown in Figures 4-6.

Figure 1. The first eigenfunction for different values of.

Figure 2. for the first eigenfunction for different values of.

Figure 3. The first eigenvalue for different values of.

Figure 4. The second eigenfunction for different values of.

Figure 5. for the second eigenfunction for different values of.

Figure 6. The second eigenvalue for different values of.

Below we present the numerical results for an example where the parameters have the units used in practice, [14] . We consider a beam of rectangular cross section with the dimensions: height, width b = 62.4

nm, and length L = 1000 nm (the corresponding). We take E = 1000 Gpa, D = −1923 Gpa. The moment inertial I_{1} and I_{2} are computed by, [10] . The first eigenvalue is

given by. The corresponding criticial buckling load is.

In this case the perturbation analysis of Section 2, gives and. In Figures 7-9. we compare the numerical results to the results obtained from the perturbation solution.

6. Conclusion

We considered the buckling of an Euler-Bernoulli beam made of graphene. We used the properties of the buck- ling functions proved in Section 3 to develop equivalent boundary value problems which we treat numerically using the shooting method. We presented the numerical results for the first two eigenpairs and compared them

Figure 7. The first eigenfunction for.

Figure 8. for.

Figure 9. for.

to the solutions obtained by perturbation methods. We also presented the numerical results for an example using the units used in practice. Our numercial results indicate that the critical buckling load for a graphene Euler-Ber- noulli beam is decreased as the graphene’s qaudratic parameter is increased.

Acknowlegements

The research in this paper is a part of a research project funded by the Research office, Texas A & M University at Qatar.

NOTES

^{*}First author.

Conflicts of Interest

The authors declare no conflicts of interest.

[1] |
Zhu, Y., Murali, S., Cai, W., Li, X., Suk, J.W., Potts, J.R. and Ruoff, R.S. (2010) Graphene and Graphene Oxide: Synthesis, Properties, and Applications. Advanced Materials, 22, 3906-3924. http://dx.doi.org/10.1002/adma.201001068 |

[2] | Galiotis, C. (2011) Mechanical Properties of Graphene. Graphene 2020/Brussels. |

[3] |
Kim, M.T. (1996) Influence of Substrates on the Elastic Reaction of Films for the Microindentation Tests. Thin Solid Films, 283, 12-16. http://dx.doi.org/10.1016/0040-6090(95)08498-3 |

[4] |
Lee, C., Wei, X., Kysar, J.W. and Hone, J. (2008) Measurement of the Elastic Properties and Intrinsic Strength of Monolayer Graphene. Science, 321, 385-388. http://dx.doi.org/10.1126/science.1157996 |

[5] |
Lee, C., Wei, X., Li, Q., Carpick, R., Kysar, J.W. and Hone, J. (2009) Elastic and Frictional Properties of Graphene. Physica Status Solidi (B), 246, 2562-2567. http://dx.doi.org/10.1002/pssb.200982329 |

[6] |
Sansoz, F. and Gang, T. (2010) A Force-Matching Method for Quantitative Hardness Measurements by Atomic Force Microscopy with Diamond-Tipped Sapphire Canti-levers. Ultramicroscopy, 111, 11-19. http://dx.doi.org/10.1016/j.ultramic.2010.09.012 |

[7] | Malina, E.W. (2011) Mechanical Behavior of Atomically Thin Graphene Sheets Using Atomic Force Microscopy Nanoindentation. Master’s Thesis, University of Vermont, Vermont. |

[8] | Elgindi, M.B.M. and Wei, D.M. (2012) On the Global Solvability of a Class of Fourth-Order Nonlinear Boundary Value Problems. Applied Mathematical Sciences, 6, 5981-5992. |

[9] |
Li, P., You, Z. and Cui, T.H. (2012) Graphene Catilever Beams for Nano Switches. Applied Physics Letters, 101, 093111. http://dx.doi.org/10.1063/1.4738891 |

[10] | Wei, D., Sarria, A. and Elgindi, M.B.M. (2012) Critical Buckling Loads of the Perfect Hollomon’s Power-law Columns, Mechanics Research Communications. 1-12. |

[11] | Barkat, A.B. and Matti, V. (2012) On Generalized Trigonometric Functions with Two Parameters. |

[12] | Drï￡¡bek, P. and Manï￡¡sevich, R. (1999) On the Closed Solution to Some pLaplacian Nonho-Mogeneous Eigenvalue Problems. Differential Integral Equations, 12, 773-788. |

[13] | Elgindi, M.B.M., Wei, D. and Elgindi, T.M. (in Press) On the Solvability of an Euler Graphene Beam Subject to Axial Compressive Load. |

[14] | Malina, E.W. (2011) Mechanical Behavior of Atomically Thin Graphene Sheets Using Atomic Force Microscopy Nanoin-dentation. Master Thesis, University of Vermont, Vermont. |

Journals Menu

Contact us

+1 323-425-8868 | |

customer@scirp.org | |

+86 18163351462(WhatsApp) | |

1655362766 | |

Paper Publishing WeChat |

Copyright © 2024 by authors and Scientific Research Publishing Inc.

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.