Partitioning Algorithm for the Parametric Maximum Flow ()

Mircea Parpalea, Eleonor Ciurea

Department of Theoretical Computer Science, Transilvania University of Bra?ov, Bra?ov, Romania.

National College Andrei ?aguna, Bra?ov, Romania.

**DOI: **10.4236/am.2013.410A1002
PDF
HTML XML
2,831
Downloads
4,876
Views
Citations

Department of Theoretical Computer Science, Transilvania University of Bra?ov, Bra?ov, Romania.

National College Andrei ?aguna, Bra?ov, Romania.

The article presents an approach to the maximum flow problem in parametric networks with linear capacity functions of a single parameter, based on the concept of shortest conditional augmenting directed path. In order to avoid working with piecewise linear functions, our approach uses a series of parametric residual networks defined for successive subintervals of the parameter values where the parametric residual capacities of all arcs remain linear functions. Besides working with linear instead piecewise linear functions, another main advantage of our approach is that every directed path in such a parametric residual network is also a conditional augmenting directed path for the subinterval for which the parametric residual network was defined. The complexity of the partitioning algorithm is *O *(*Kn*^{2}*m*) where *K* is the number of partitioning points of the parameter values interval, *n *and *m* being the number of nodes, respectively the number of arcs in the network.

Share and Cite:

Parpalea, M. and Ciurea, E. (2013) Partitioning Algorithm for the Parametric Maximum Flow. *Applied Mathematics*, **4**, 3-10. doi: 10.4236/am.2013.410A1002.

1. Introduction

Efficient algorithms for computing maximum flows in networks are important not only because they are applied directly to the analysis of traffic or communication networks, but also because they are often employed as subproblems in other general network problems. Fundamental algorithms for network flow were designed and efficient algorithms exist (Ahuja, Magnanti, & Orlin) [1] to solve different instances of this problem. A natural generalization of the maximum flow problem can be obtained by making the capacities of some arcs functions of a single parameter. The parametric maximum flow problem is to compute all maximum flows for every possible value of the parameter. For the parametric maximum flow problem with zero lower bounds and linear capacity functions of a single parameter, Hamacher and Foulds [2] investigated an approach for determining in each iteration an improvement of the flow defined on the whole interval of the parameter while for the same problem, Ruhe [3], [4] proposed a “piece-by-piece” approach. The partitioning type approach, which is presented in this paper, proposes an original algorithm for computing the maximum flow in networks with constant lower bounds and linear upper bound functions.

Partitioning technique in network has been, in the latest years, a more and more active research topic in both engineering and theoretical research. The reason why the problem under consideration is of genuine practical and theoretical interest lies in that graph partitioning applications are described on a wide variety of subjects as: data distribution in parallel-computing, VLSI circuit design, image processing, computer vision, route planning, air traffic control, mobile networks, social networks, etc. [5]. Unfortunately, graph partitioning is an NP-hard problem, and therefore all known algorithms for generating partitions merely return approximations to the optimal solution.

Further on, this paper is organized as follows; Section 2 presents the basic network flow terminology and results used in the rest of the paper. More specialized terminology is developed in later sections. In Section 3, we introduce the parametric maximum flow problem and Section 4 presents the partitioning algorithm for solving this problem. Finally, Section 5 gives an example of how the algorithm works on a network with linear upper bound functions of a single parameter. In the presentation to follow, some familiarities with flow algorithms are assumed and many details are omitted, since they are straight forward modifications of known results. Further details on notions and results presented in Section 2 can be found in the papers of Ahuja et al. [1] and Ciurea et al. [6,7].

2. Terminology and Preliminaries

Let be a capacitated network with nodes and arcs, being the set of nodes i and being the set of arcs a, so that for every arc in, with. The upper bound function and the lower bound function are two nonnegative functions, and associated with each arc. The network has two special nodes: a source node and a sink node. A flow is a function satisfying the next conditions:

(1)

for some, where is referred to as the value of the flow. Any flow on a directed network satisfying the flow bound constraints:

(2)

is referred to as a feasible flow. A cut is a partition of the node set into two subsets and, denoted by. An arc with and is referred to as a forward arc of the cut while an arc with and as a backward arc of the cut. Let denote the set of forward arcs in the cut and denote the set of backward arcs. A cut is an cut if and. The maximum flow problem is to determine a flow for which is maximized. The maximum flow problem in a network can be solved in two phases: (1) establishing a feasible flow; (2) from a given feasible flow, establishing the maximum flow. For the first phase, see the algorithms presented in [1,7,8].

3. The Parametric Maximum Flow

The parametric flow problem consists in generalising the classic problem of flows in networks by transforming the upper bounds of some arcs of the networkin linear functions of a real parameter.

**Definition 1.*** A directed network for which the upper bounds of some arcs **are functions of a real parameter is referred to as a parametric network and is denoted by*.

For a parametric network, the parametric upper bound (capacity) function associates to each arc and for each of the parameter values in an interval, the real number, referred to as the upper bound of arc:

(3)

where is a real valued function associating to each arc the real number, referred to as the parametric part of the upper bound of the arc. The nonnegative value is the upper bound of the arc for, i.e.with. For the problem to be correctly formulated, the upper bound function of every arc must respect the condition for the entire interval of the parameter values, i.e. and. It follows that the parametric part of the upper bounds must satisfy the constraint:,. The parametric flow value function associates to each of the nodes a real number referred to as the value of node for each of the parameter values.

**Definition 2.*** A feasible flow in the parametric network is called a parametric flow and it is a function satisfying the following constraints:*

(4)

(5)

The parametric maximum flow (PMF) problem is to compute all maximum flows for every possible value of:

, (6)

(7)

(8)

This problem looks like a classic maximum flow problem with the decisive difference that the variables of this problem are piecewise linear functions instead of real numbers and that the upper boundsare linear functions instead of constants.

**Definition 3. ***Let F be the set of piecewise linear functions with. On the set F, an ordering relation is defined as follows:*

. (9)

For any two piecewise linear functions and, it is possible that neither the relation nor hold for the entire interval and consequently, the two functions may not necessarily be comparable. But it is always possible that a partitioning B:of the interval to be defined such as on every subinterval,one of the two cases to hold: or, i.e. the two linear functions to become comparable. This means that the two functions have no crossing points within any subinterval, the only crossing points taking place for.

**Proposition 1 .**

**Definition 4. ***A parametric cut partitioningdenoted by, , is defined as a finite set of cuts, , together with a partitioning of the interval of the parameter in disjoints subintervals, , so that*.

**Definition 5. ***For the parametric maximum flow problem, the capacity of a parametric cut partitioning is a linear function on every subinterval, , defined as:*

(10)

**Definition 6. ***A parametric cut partitioning with the subintervals assuring that every cut is a minimum cut within the subinterval is referred to as a parametric minimum cut and is denoted by,*.

**Theorem 1.** (*Parametric max-flow min-cut theorem* [9])* If there is a feasible flow in the parametric network, the value function of the parametric maximum flow from a source s to a sink t equals the capacity of the parametric minimum cut,*.

Let be a vector of feasible flow functions. Assuming that an arc carries a flow, the existing flow can be increased either by pushing the flow from node to node over the arc, or by pulling the flow from node to node along the arc. These flows are computed as differences between piecewise linear functions of.

**Definition 7.*** For the parametric maximum flow problem, the parametric residual capacity of any of the arcs with respect to a given parametric flow represents the maximum additional flow that can be sent from node to node over the arcs and and is given by:*

.(11)

**Definition 8. ***The subintervals where an augmentation of the flow is possible along the arc are defined as follows:*

(12)

**Definition 9. ***Given a feasible flow in the parametric network, the network denoted bywithbeing the set consisting only of arcs with positive parametric residual capacities, is referred to as the parametric residual network with respect to the given flow for the parametric maximum flow problem.*

If an arc does not belong to then is set.

**Definition 10.*** A conditional augmenting directed path is denoted by and is a directed path from the source s to the sink t in the parametric residual network with the restriction that:*

(13)

**Definition 11 .**

**Definition 12. ***The parametric residual capacity of a conditional augmenting directed path is the inner envelope of the parametric residual capacity functions for all arcs composing and for all parameter values in the subinterval*:

. (14)

Let be the number of subintervals within the piecewise linear function maintains a constant slope. Since any conditional augmenting directed path is an elementary path, results that.

**Theorem 2.** (*Conditional augmenting path theorem *[9])* A flow is a parametric maximum flow if and only if the parametric residual network contains no conditional augmenting directed path.*

4. Partitioning Algorithm for the Parametric Maximum Flow Problem

The partitioning algorithm (PA) for the parametric maximum flow problem presented in this paper determines in each of its iterations an improvement of the flow over a subinterval of the parameter values generated by the partition induced by the first (in increasing order of their values) of the breakpoints of the piecewise linear parametric residual capacity of the conditional augmenting directed paths in the parametric residual network. Since the parametric residual capacities for all the arcs inare linear functions of, the parametric residual capacity of any conditional augmenting directed path in the parametric residual network is a piecewise linear function of with breakpoints.

In order to avoid working with piecewise linear functions, the algorithm works in several parametric residual networks defined for subintervals of the parameter values where the parametric residual capacities of all arcs remain linear functions. The parametric residual networkdefined for the subinterval of the parameter values is denoted by. Besides working with linear instead piecewise linear functions, another main advantage of our approach is that every augmenting directed path in a parametric residual network is also a conditional augmenting directed path in for the subintervalfor which the residual network is defined.

The first phase of finding a parametric maximum flow consists in establishing a feasible flow, if one exists, in a non-parametric network obtained from the initial parametric network by only replacing the parametric upper bound functions with the non-parametric upper bounds: forand for. After a feasible flow is established, the next step is to compute the parametric residual network for this feasible flow. For the non-parametric flow, the parametric residual capacities for every arc in can be written as, where represents the slope of the parametric residual capacity function andis the value of the parametric residual capacity function computed for, i.e..

The second phase of the algorithm starts with the parametric residual network, defined for the nonparametric feasible flow, which is also, i.e. and, since the residual capacities of all arcs are linear functions. The algorithm repeatedly finds shortest augmenting directed paths from the source node to the sink node in the parametric residual network and increases the flow in the original parametric network only in the subinterval which reflects in updating the parametric residual network. The parameter value is updated on each flow augmentation step so that the parametric residual capacities of all arcs not to have breakpoints within the interval. During its successive iterations, the algorithm maintains an ordered list of parameter values for which the parametric network is partitioned. This list is initialised as and is updated, each time the parametric residual networkcontains no conditional augmenting directed path, with a new value, representing the new lower limit of the subinterval of the parameter values for which a new parametric residual network is defined. At this point, the parametric maximum flow is computed for the subinterval and the algorithm goes on iterating within the next subintervaluntil the value is reached.

PARTITIONING ALGORITHM (PA);

1. BEGIN

2. compute a feasible flow in network;

3. compute the parametric residual network;

4.;;;

5. REPEAT

6. SSADP;

7. ;

8. UNTIL ();

9. END.

In the k-th step of the partitioning algorithm (PA), the Successive Shortest Augmenting Directed Paths (SSADP) procedure computes the parametric residual networkfor the subinterval,where the parametric residual capacities of all arcs can be written as,withand. As can be easily seen, the restriction,is equivalent with.The SSADP procedure maintains a partly conditional augmenting directed path which is memorised in the predecessor vector and executes ADVANCE and RETREAT operations from the current node until the sink node is reached, i.e. the partly conditional augmenting directed path is transformed in a conditional augmenting directed path.

ADVANCE; RETREAT;

1. BEGIN 1. BEGIN

2. ; 2.;

3. ; 3. IF THEN;

4. END; 4. END

From a current node, an ADVANCE operation will add the admissible arc to the partly conditional augmenting directed path while a RETREAT operation will eliminate the arc from it.

PROCEDURE SSADP;

1. BEGIN

2. compute the parametrico residual network;

3. compute the exact distance labels in;

4. ;;;;;

5. WHILE DO

6. IF(exists an admissible arc) THEN;

7. BEGIN

8. ADVANCE;

9. IF THEN

10. BEGIN

11. RC;

12. ;

13. END;

14. END;

15. ELSE RETREAT;

16. compute the parametric maximum flow;

17. add to the list;

18. END;

A call to Residual Capacity (RC) procedure will compute the parametric residual capacity of the conditional augmenting directed path and will update the values and according to the augmentation of the flow. After initializingandin order to assure that the parametric residual capacityremains a linear function without breakpoints in the subinterval, the slope of the parametric residual capacity is compared with the slopesof the parametric residual capacities of all the arcs.

If the condition holds for an arc, it means that the linear functions and have a crossing point for a parameter value and, consequently, the parametric residual capacity would have a breakpoint for.

If, i.e. the breakpoint is placed within the subinterval, the upper limit will be replaced with the new parameter value. Then, the parametric residual capacity will be subtracted from the parametric residual capacities of all arcs and added to those of the arcs, for all the parameter values in the new subinterval. As soon as contains no conditional augmenting directed paths, the parametric maximum flow is computed for the subinterval and the valueis added to the list. Then the current value of the counter is incremented and, if the condition is not reached yet, the algorithm reiterates for the next subinterval. Otherwise, if equals, the whole interval of the parameter has been completed and the algorithm stops. For each of the subintervals, the parametric maximum flow is computed as

.

PROCEDURE RC;

1. BEGIN

2. compute based on predecessor vector;

3. ;

4. ;

5. ;

6. WHILE DO

7. BEGIN

8. IF THEN

9. BEGIN

10. ;

11. IF THEN;

12. END;

13. ;;

14. ;;

15. ;

16. END;

17. END;

**Theorem 3.** *The Successive Shortest Augmenting Directed Paths (SSADP) procedure correctly computes a parametric maximum flow in the parametric networkfor the parameter values in the subinterval.*

*Proof. *Since procedure SSADP works in the parametric residual network for which the parametric residual capacities of all arcs and the parametric residual capacity of any of the augmenting directed paths, are linear functions without crossing points within the subinterval, the correctness of the procedure results from the correctness of the shortest augmenting directed path algorithm for the non-parametric case.

**Theorem 4. ***The Residual Capacity (RC) procedure correctly computes the parametric residual capacity*

*of a conditional augmenting directed path in the parametric residual network for the parameter values in the subinterval.*

*Proof. *As the parametric residual capacity is the inner envelope of the parametric residual capacity functions of all arcs composing the conditional augmenting directed path and since these parametric residual capacities are linear functions for the entire subinterval, the proof results from choosing the minimum possible values (lines 3 and 4 of procedure RC) for and for the corresponding, as well as from continuously updating (line 11 of procedure RC) the upper limit of the subinterval for which the parametric residual network is defined.

**Theorem 5.*** (Theorem of correctness) If there is a feasible flow in the parametric network, then the partitioning algorithm (PA) correctly computes a parametric maximum flow for.*

*Proof.* The partitioning algorithm iterates on successive subintervals, starting with and ending with and consequently, the correctness of the algorithm obviously follows from Theorem 3. Actually, the algorithm ends with a parametric maximum flow and with the partitioning of the interval of the parameter values:,.

**Theorem 6.** *(Theorem of complexity) The partitioning algorithm (PA) for the parametric maximum flow problem runs in time, where is the number of values in the set at the end of the algorithm.*

*Proof. *For each of the subintervals , in which is partitioned the interval of the parameter values, the algorithm makes a call to procedure SSADP. Since the complexity of the procedure SSADP equals the complexity of the non-parametric successive shortest augmenting directed paths algorithm, being, the total complexity of the partitioning algorithm is.

5. Example

The algorithm is illustrated on the parametric network presented in Figure 1 where the source node is, the sink node, and for the parameter taking values in the interval, i.e..

The feasible flow, computed in the non-parametric network, is presented in Figure 2the parametric residual network is presented in Figure 3 and the list B is initialised as.

In the first iteration, for and, the algorithm makes the first call to procedure SSADP which computes the parametric residual network. The values computed for and, as well as the exact distance labels in are indicated in Figure 4(a). The predecessor vector is initialized as, and are set to 0 andis set to. The algorithm performs two consecutive ADVANCE steps over the admissible arcs (0,1) and respectively (1,3) and, since the sink node is reached, procedure RC is called which builds the conditional augmenting directed path, based on the

Figure 1. The parametric network with linear capacity functions and constant lower bounds.

Figure 2. The feasible flow in the non-parametric network.

Figure 3. The parametric residual network.

(a)(b)(c)

Figure 4. Exemplifying the first iteration performed by the partitioning algorithm (PA) for the parametric network presented in Figure 1(a).

predecessor vector, and computes the values and, i.e. the parametric residual capacity. The slope of the parametric residual capacity is compared with the slopesof the parametric residual capacities of the arcs (1,3) and (0,1). Since the condition holds for the arc (1,3), the value is computed and because, the upper limit of the subinterval of the parameter values is updated to. Then the values and are updated for both arcs (1,3) and (0,1) and procedure RC ends with the parametric residual network presented in Figure 4(b).Then, procedure SSADP makes two ADVANCE steps over the arcs (0,2) and (2,3) reaching again the sink node and procedure RC builds the new conditional augmenting directed path with the parametric residual capacity, i.e. and.For the arc (0,2), the value is computed and since the upper limit of the subinterval is updated to.

Procedure SSADP selects again the admissible arc (0,2) and, since from node 2 there is no admissible arc, it is relabelled as and a RETREAT step is performed to. At this stage, there is no admissible arc in from the current node and therefore, after relabeling node 0 as, this label does not meet the restriction. Based on the residual capacities presented in Figure 4(c), the parametric flow (Figure 5(a))is computed for the parameter values in the subintervaland the value is added to the list B which becomes. After the procedure SSADP ends, the current value of the counter

(a)(b)

Figure 5. The parametric maximum flow for each of the subintervals J_{k}, k = 0, 1, 2, 3 of the parameter values: (a) J_{0} = [0, 1/4]; (b) J_{1} = [1/4, 1/2]; (c) J_{2} = [1/2, 3/4]; (d) J_{3} = [3/4, 1].

is incremented to and, since, a new iteration will be performed.

After performing three more iterations, the value is added to the list B which becomes

and the current value of the counter is incremented to. Since, the partitioning algorithm ends. The parametric maximum flows computed by the algorithm are presented in Figure 5.

As can be noticed in Figure 5, the parametric maximum flow value function equals the capacity function, with, , of the parametric minimum cut in the parametric network.

Conflicts of Interest

The authors declare no conflicts of interest.

[1] | R. Ahuja, T. Magnanti and J. Orlin, “Network Flows. Theory, Algorithms and Applications,” Prentice Hall Inc., Englewood Cliffs, 1993. |

[2] | H. W. Hamacher and L. R. Foulds, “Algorithms for Flows with Parametric Capacities,” ZOR—Methods and Models of Operations Research, Vol. 33, No. 1, 1989, pp. 21-37. |

[3] | G. Ruhe, “Complexity Results for Multicriterial and Parametric Network Flows Using a Pathological Graph of Zadeh,” Zeitschrift für Operations Research, Vol. 32, No. 1, 1988, pp. 9-27. |

[4] | G. Ruhe, “Characterization of All Optimal Solutions and Parametric Maximal Flows in Networks,” Optimization, Vol. 16, No. 1, 1985, pp. 51-61. http://dx.doi.org/10.1080/02331938508842988 |

[5] | C.-E. Bichot and P. Siarry, “Graph Partitioning: Optimisation and Applications,” ISTE—Wiley, 2011. |

[6] | E. Ciurea and L. Ciupala, “About Preflow Algorithms for the Minimum Flow Problem,” WSEAS Transactions on Computer Research, Vol. 1, No. 3, 2008, pp. 35-42. |

[7] | E. Ciurea and L. Ciupala, “Sequential and Parallel Algorithms for Minimum Flows,” Journal of Applied Mathematics and Computing, Vol. 15, No. 1-2, 2004, pp. 53.E75.E. |

[8] |
G. Gallo, M. D. Grigoriadis and R. E. Tarjan, “A Fast Parametric Maximum Flow Algorithm and Applications,” SIAM Journal on Computing, Vol. 18, No. 1, 1989, pp. 30-55. http://dx.doi.org/10.1137/ 0218003 |

[9] | M. Parpalea, “Min-Max Algorithm for the Parametric Flow Problem,” Bulletin of the Transilvania University of Brasov, Series III: Mathematics, Informatics, Physics, Vol. 3, No. 52, 2010, pp. 191-198. |

Journals Menu

Contact us

+1 323-425-8868 | |

customer@scirp.org | |

+86 18163351462(WhatsApp) | |

1655362766 | |

Paper Publishing WeChat |

Copyright © 2024 by authors and Scientific Research Publishing Inc.

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.