Metal ion–binding properties of the L-aspartic acid and tartaric acid, a coparative investigation. How can be increased the dosage of mineral absorption in the body
Seyed Ali Akbar Sajadi
DOI: 10.4236/abb.2010.14047   PDF    HTML     7,748 Downloads   13,472 Views   Citations

Abstract

A comparative research has been developed for acidity and stability constants of M(TTA)1 and M(Asp)2 complexes which have been determined by potentiometric pH titration. Depending on metal ion–binding properties, vital differences in building complex were observed. The present study shows that in M(TTA) complexes, metal ions are coordinated to the carboxyl groups, but in M(Asp) some metal ions are able to build macrochelate over amine group. Hence, the following intermolecular and as a result independent concentration equilibrium between an open–isomer M(Asp)op and a closed–isomer M(Asp)cl, has to be considered cl op. The amounts are reported. The results mentioned above demonstrate that for some M(Asp) complexes the stability constants is also largely determined by the affinity of metal ions for amine group. This leads to a kind of selectivity of metal ions and transfer them via building complexes with the aspartate. The result of this effect is a higher dosage-absorption of minerals in body. Based on the sort of metal ions, the drug-therapy can be different. For heavy metal ions this building complex helps the absorption and filtration of the blood plasma, and consequently the excursion of heavy metal ions takes place. This is an important method in microdialysis. Other metal ions such as the complexes can be considered as mineral carriers. These complexes in certain conditions (PH–range) can release the minerals in body.

Share and Cite:

Sajadi, S. (2010) Metal ion–binding properties of the L-aspartic acid and tartaric acid, a coparative investigation. How can be increased the dosage of mineral absorption in the body. Advances in Bioscience and Biotechnology, 1, 354-360. doi: 10.4236/abb.2010.14047.

1. INTRODUCTION

It is known that metal ions are important for numerous biochemical reactions. For example, enzymes work only in the presence of such metal ions. The metal ion complexes of many amino acids have been investigated [1-6]. Surface modification of silicaand cellulose-based microfiltration membranes with functional polyamino acids for heavy metal sorption has been studied [7]. Functionalized membranes represent a field with multiple applications. Examination of specific metal−macromolecule interactions on these surfaces presents an excellent method for characterization of these materials. Ion exchange, chelation, and electrostatic interactions form the basis of metal sorption. The behavior of various materials functionalized with polypeptides and other molecules is a topic of interest because of its applications in affinity separations, biosensors, and other uses including site-specific interactions [8]. An example of the latter involves the removal of heavy metals from aqueous solutions [9-12]. These sorbents are made of a variety of materials containing many different functional groups. The advantage of affinity separations is that they may be tailored for the desired selectivity and capacity. The functionalization of materials is of vital importance for the production of new materials with specific properties. The characterization of these new materials is also critical. Enhancing micro dialysis recovery of metal ions by incorporating poly-L-aspartic acid and poly-L-histidine in the perfusion liquid has been studied [13].

A study of the evaluation of poly-L-aspartic acid and poly-L-histidine as binding agents to enhance micro dialysis recovery of metal ions is presented. Investigations were carried out to compare micro dialysis recovery for Cr, Cu, Ni, and Pb using water as the perfusion liquid as well as applying various concentrations of poly-L-aspartic acid and poly-L-histidine in the perfusion liquid. This is aimed at understanding the mechanism of the selectivity of such reactions.

2. EXPERIMENTAL

2.1. Materials

The L-Aspartic acid (extra pure) was purchased from Merck, Darmstadt, Germany (Figure 1). The nitrate salt of Na+, Ca2+, Mg2+, Mn2+, Co2+, Cu2+, and Zn2+ (all pro analysis) were from Merck. All the starting materials were of reagent grade and used without further purification. Potassium hydrogen phthalate and standard solutions of sodium hydroxide (titrasol), nitric acid, EDTA and of the buffer solutions of pH 4.0, 7.0 and 9.0 were all from Merck. All solutions were prepared with de-ionized water. Water was purified by Milil-Q water purification system, de-ionized and distillated.

pH titrations Reagents Carbonate-free sodium hydroxide 0.03 M was prepared and standardized against sodium hydrogen phthalate and a standard solution of nitric acid 0.5 mM. M(II) nitrate solution (0.03 M) was prepared by dissolving the above substance in water and was standardized with standard solution of EDTA 0.1 M (triplex).

2.2. Apparatus

All pH titrations were performed using a Metrohm 794 basic automatic titrator (Titrino), coupled with a thermostating bath Hero at 25℃ (± 0.1℃) and a Metrohm combined glass electrode (Ag/AgCl). The pH meter was calibrated with Merck standard buffer solutions (4.0, 7.0 and 9.0).

2.3. Procedure

For the determination of acid dissociation constants of the ligand L, an aqueous solution (0.03 mM) of the protonated ligand was titrated with 0.03 M NaOH at 25℃ under nitrogen atmosphere and ionic strength of 0.1 M, NaNO3. For the determination of binary (a ligand and Cu2+) system, the ratios used were 1:1, Cu(II):Ligand and 1:1, Cu(II):L, 0.3 mM. This solution was titrated with 0.03 M NaOH under the same conditions mentioned

Figure 1. Chemical formula of L-aspartic acid (left) acid and L-tartaric acid (right).

above. Each titration was repeated seven times in order to check the reproducibility of the data.

2.4. Calculation

The acid dissociation constants, and for H2 (L) were calculated by an algebraic method. The equilibria involved in the formation of 1:1 complex of L and a divalent metal ion may be expressed as eqs.4 & 5.

2.5. Results and Discussion

The potentiometric pH-titrations (25℃, 0.1 M, NaNO3) were carried out to obtain the acidity and stability constants which are summarized in Table 1.

2.6. Acidity Constants

Lartate ion (L2-), -O2CCH2CH(NH2)CO2-, is a two-basic species, and thus it can accept two protons, given H2(L), for which the following de-protonation equilibria are hold:

(1)

(2)

(3)

(4)

The two proton in H2(L) are certainly bound at the terminal acetate and amino groups (Figure 1), i.e., it is released from HO2CCH2CH(NH3+)CO2 according to equilibrium (1) (2) (3) (4). It is known as zwitter-ion. It is also closed to the de-protonation of acetate groups which occurs at the terminal acetate groups of tartaric acid [6,14]. L2- can release one more proton from the terminal acetate group. Hence, here due addition to Equilibrium (5) & (6) should be considered, which takes place above a pH ≈ 2 (see Figure 2).

(5)

(6)

Here, the aforementioned reaction is not considered further.

2.7. Stability of Binary and Ternary Complexes

If we abbreviate for simplicity associating with Ca2+, Mg2+, Mn2+, Co2+, Cu2+, and Zn2+ with M2+, then one may write the following two Equilibrium of (7)(8)(9) (10):

(7)

(8)

Table 1. Comparison of the stability constants of binary complexes of Asp and TTA with M2+ at 25°C, I = 0.1 M, NaNO3*.

Figure 2. Schematic equilibrium between an “open” isomer M(Asp)op and a “closed” species, M(Asp)cl, see Eq.11 & 12.

(9)

(10)

The experimental data of the potentiometric pH titrations may be completed by considering the above-mentioned Equilibrium (1) & (2) through (9) & (10), if the evaluation thereof is not carried into the pH range, where hyrdoxo complex formation occurs.

The schematic illustration of equilibrium between different protonated species is shown in Figure 2. Based on this point we can define following equilibrium:

(11)

(12)

TTA can represent the open form.

2.8. Potentiometric Analyses

Now we are able to compare the stability constants of two species M(TTA) and M(Asp). It could easly distinguish that thos constants of M(Asp) is generally larger than those of the corresponding M(TTA) species. This increased stability of the difference between the stability constants as defined in Eqs.11 & 12 [15-18]:

(13)

Positive amount of ∆logK indicates the back–binding of the metal ion, with other words the bilding of chelate (see Figure 2).

According Figure 2 we can define the dimensionless equilibrium constant KI as follows:

(14)

The equilibrium constant may be deduced [19-22] from the experimentally accessible overall stability constant, using eq.15,

(15)

Now we can combine Eqs.7 and 9 to receive Eq.16,

(16)

The procentuage anount of closed species in Eq.17, which represent the intramilecular interactions i.e. chelate bilding can be calculated via Eq.17 as follows,

(17)

This result is summarized in Table 1. As we can see from these results, the stability constants of the binary complexes, such as M(L) (Figure 3) were refined separately using the titration data of this system in a 1:1, ligand:M2+ ratio in the same conditions of temperature and ionic strength (according Eqs.9 & 10), as they were in good agreement with reported value [6,23]. We didn’t receive reasonable results for. The stability constants of table 1 show the following trends. The obtained order for TTA is Mn2+ > Co2+ < Cu2+ > Zn2+. The corresponding order for Asp is Mn2+ < Co2+ < Cu2+ > Zn2+. The last observed stability order for aspartate follows the Irving-Williams sequence [24].

As we can use from Figure 3, aspartic chelates metal ions weakly via the amino nitrogen and carbonyl oxygen. A stronger chelation occurs upon an amide nitrogen bound hydrogen by some metal ions such as Cu2+. This reaction occurs in neutral pH conditions (pH ≈ 7) with Cu2+. A crystal structure of M2+ chelate with a structure analogous has been studied [25].

If we now consider the two isomers which occure in equillibrium Figure 2 as M(Asp)op and M(Asp)cl, we can define the chelate equilibrium constants KI by Eq.15.

In the last column of Table 1 are summarized the results of the difference between stability constants of TTA and Asp Eq.13. The amount of ∆logK for Mn2+ is not significant, but in the case of other metal ions such as Co2+, Cu2+ and Zn2+ the differences are remarkable. The increased amount of stability constants in the case of Asp shows that the formation of chelate is taken place. This means the additional complex stability is a degree of the affinity of the metal ions for Asp. One can now translate this affinity in percent chelate formation degree. Hence, if both these chelate isomers do exist, the percentages calculated for M (Asp)cl Eq.17 and listed in the last column of Table 1 comprise the sum of percentages for both isomers.

However, as we have seen above, for the persent cases ∆logK holds and hence values for the chelate bilding, which then also allow calculation of percentage of the closed isomer M(Asp)cl with Eq.17. The chelate– bilding can occure in inner-sphere or outer-sphere form via amid group. The results show that the total percentage of chelate – bilding according Eq.17 for Mg2+ is about 75% and for the other metal ions such as Co2+, Cu2+, and Zn2+ is ≈ 100%. In other words, in Figure 2, the equilibrium is for the last three metal ions completely on the right site. Because of high increased stability we can draw conclusion, that the releasing of some chelated metal ions such as Co2+, Cu2+, and Zn2+ in biological systems is relatively strong. But also in comparison with “hard” metal ions like Mg2+, Ca2+, and Mn2+ is the releasing much easier. The properties can play a significant role for catalytic activity of such metal ions in biological systems.

These thermodynamic constants help us now to understand why poly-L-aspartic acid and poly-L-histidine is presented as binding agents to enhance microdialysis recovery of metal ions. Enhancing microdialysis recovery of metal ions by incorporating poly-L-aspartic acid and poly-L-histidine in the perfusion liquid is a very successful method [13]. The data from these studies demonstrate the suitability of poly-L-aspartic as selective and effective binding agents that enhance the microdialysis recovery of metal ions. Application of the optimised conditions to the determination of Pb and Cu in a wastewater sample confirmed the versatility of microdialysis, as higher recoveries of Cu were obtained with poly-L-aspartic acid compared to direct determination.

Although monitoring of metal ions at trace levels is of interest, few studies that involve in situ sampling and sample clean up of metal ions have been reported. Determination of metal ions in environmental samples is necessary in order to give a reflection of the level of pollution in the ecosystem [26]. Similarly, in biological systems, the knowledge of concentration of metal ions is essential for the understanding of both physiological and pathological conditions [27-29].

Biological systems have the ability to selectively bind to metals taking advantage of the array of protein binding functionalities [30]. Short chain synthetic biopolymers also have unique, strong and selective binding properties offered by their constituent amino acids.

Poly-L-aspartic acid and poly-L-histidine have also shown selectivity for trace metal extraction when immobilised on chromatographic substrates [31,32]. Amino acids and peptides have been shown to bind to transition metal ions with a high degree of selectivity [33]. The binding sites are associated with nitrogen, sulphur and oxygen donors from histidine, tyrosine, glutamic or aspartic acids and cysteine [33,34]. The ‘harder’ carboxylate groups of poly-Laspartic acid prefer to bind with Cu, which is a ‘harder acid’ metal [32]. The poliovirus RNA-dependent RNA polymerase, 3Dpol, is known to share a region of sequence homology with all RNA polymerases centered at the GDD amino acid motif. The two aspartic acids have been postulated to be involved in the catalytic activity and metal ion coordination of the enzyme [35].

Interactions between aspartic acid (Asp) and cytidine- 5-monophosphate (CMP) in metal-free systems as well as the coordination of Cu (II) ions with the above ligands were studied. The composition and overall stability constants of the species formed in those systems were determined [36]. Amino acid chelated minerals, also referred to as chelated minerals or mineral chelates, are minerals that have been chemically engineered to become more bioavailable to our body. Amino acids act as carriers to ship the much-needed minerals to the destination (the small intestine) where consumption takes place.

Elixir Industry has tested many self-claimed “mineral chelates” available on the market and found most of them are merely mixtures of amino acids and inorganic minerals [37]. Why are amino acid chelated minerals superior to common inorganic minerals?

In contrast to the high-tech nature of chelated minerals, common inorganic minerals that are used in majority of vitamin and mineral supplements today are minerals that are easily found in nature or in the earth, in the forms of rock or limestone. First of all, chelated minerals are substantially more bioavailable than common inorganic minerals. For mineral to be absorbed by our body, it has to be soluble in the luminal fluid of the small intestine. The pH of the small intestinal fluid below the duodenum is 7.0-7.2. Most inorganic minerals will form insoluble hydroxides and become nonabsorbable at this pH. Chelated minerals, on the other hand, are well shielded by amino acids, and will not precipitate to cause absorption problems. Which we can see in the results of the Table 1 last column and Figure 3.

Figure 3. Schematic structures of the species with interactions according to equilibrium (5) for Cu(Asp). The structure in the right part of the figure was drawn with the programCS Chem 3D, version 3.5, from Cambridge Software Corporation.

Secondly, using chelated minerals also prevents gastrointestinal (G.I.) distress. As mentioned above inorganic minerals can cause magma precipitation. This precipitation can coat the mucous membrane, resulting in diarrhea and constipation. Chelated minerals, however, do not form magma precipitation, and using them will not cause stomach disorders. In addition chelated minerals are kept intact from many compounds regularly found in foodstuffs. Those compounds that commonly exist in foods, such as carbonates, phosphates, oxalates and phytates, oftentimes attach themselves to inorganic minerals to form insoluble precipitates. These precipitates will further reduce the absorption of minerals in the small intestine.

Finally chelated minerals help protect vitamin stability. Inorganic metal ions may serve as a catalyst to further the oxidation and degradation of vitamins. Chelated minerals, on the other hand, are well shielded by bonded organic ligands. Which we can consider in Figure 3. They will not come in contact with vitamin molecules; thus, the vitamins will be protected from oxidation and degradation. And since magma precipitation is prevented, chelated minerals will not absorb vitamins and cause them to become nonabsorbable—problems that common inorganic mineral are known to cause. As we can see, in Figure 3, TTA is not able to bild three dendate chelate like Asp, so that metal ions are not enough shielded. As consequence metal ions can take part in substituation reactions.

There are different types of amino acids. L-Aspartic Acid plays a vital role in energy production and is a major excitatory neurotransmitter. It is involved in building DNA (genetic structures in cells), in carbohydrate metabolism & protein metabolism. It helps detoxify ammonia in the body, helps reduce fatigue and depression, and it also supports liver protection. Mineral Chelates (for example AbSolu) are chelates of L-Aspartic Acid and one of the minerals such as calcium, magnesium and zinc. They are chemically synthesized by proprietary technology developed by Elixir Industry [37]. New products are anhydrous chelates of two L-Aspartic Acid molecules and a single metal ion. The technology of achieving this structure is patented and was jointly developed by Elixir Industry and the Chinese National Institute of Pharmaceutical Industry. Mineral Chelates to be completely soluble over a wide range of pH values.The chelated minerals are soluble in the small intestine for absorption and subsequent bio-utilization. These products are compatible with most nutritional additives commonly used in formulations and tableting applications.

There are different types of amino acids. Nutrition scientists selected L-Aspartic acid based on many additional benefits that come with it. Most of the competetors’ products contain two or more crystalline water in their molecules. Theoretically those products should not be referred to as “chelates” and the bonding (if indeed exists) of amino acid molecules to mineral ions is vulnerable. These products are anhydrous chelates of two L-Aspartic Acid molecules and a single metal ion.

NOTES

2L-aspartic acid

Conflicts of Interest

The authors declare no conflicts of interest.

References

[1] IUPAC-IUBMB Joint Commission on Biochemical Nomenclature. Nomenclature and Symbolism for Amino Acids and Peptides, Recommendations on Organic & Biochemical Nomenclature, Symbols & Terminology etc. Retrieved on 2007-05-17.
[2] Nelson, D.L. and Cox, M.M. (2000) Lehninger, principles of biochemistry. 3rd Edition, Worth Publishing, New York.
[3] L. Stryer, (1995) Biochemistry.4th Edition, W. H. Freeman and Company, New York.
[4] Chen, P.E., Geballe, M.T., Stansfeld, P.J., Johnston, A.R., Yuan, H.J., Jacob, A.L., Snyder, J.P., Traynelis, S.F. and Wyllie, D.J.A. (2005) Structural features of the glutamate binding site in recombinant NR1/NR2A N-Methyl-D- lartate receptors determined by site-directed mutagenesis and molecular modeling. Molecular Pharmacology, 67, 1470-1484.
[5] Dunn, M.S. and Smart, B.W. (1963) DL-Lartic acid. Organic Syntheses, 4, 55.
[6] Martel, A.E. (2006) Critical stability constants of metal complexes 26.
[7] Ritchie, S.M.C., Bachas, L.G., Olin, T., Sikdar, S.K. and Bhattacharyya, D. (1999) Langmuir. 15(19), 6346-6357.
[8] Xiao, S., Textor, M., Spencer, N.D. and Sigrist, H. (1998) Langmuir. 14, 5507.
[9] Konishi, Y., Shimaoka, J. and Asai, S. (1998) Reactive and Functional Polymers. 36, 197.
[10] Reichert, J. and Binner, J.G.P. (1996) Journal of Matierals Science, 31, 1231.
[11] Bonn, G., Reiffenstuhl, S. and Jandik, P.J. (1990) Chromatogr. 499, 669.
[12] Bhattacharyya, D.; Hestekin, J. A.; Brushaber, P.; Cullen, L.; Bachas, L. G.; Sikdar, S. K. J. Membr. Sci. 1998, 141, 121.
[13] Dikabo Mogopodi and Nelson Torto, Analytica Chimica Acta Volume 482, Issue 1, (2003), Pages 91-97.
[14] S. A. A. Sajadi, A.A. Alamolhoda, A. Nazari Alavi, Scientica Iranica, (2009) in press.
[15] S. Ali A. Sajadi, Bin Song, Helmut Sigel, Inorg. Chim. Acta 283 (1998) 193-201.
[16] S. Ali A. Sajadi, Bin Song, Fridrich Gregan, Helmut Sigel, Inorg. Chem. 38(3) (1999) 439-448.
[17] S.Ali A. Sajadi, Bin Song, Fridrich Gregan,and Helmut Sigel, Bull. Chem. Soc. Ethiop. 11(2) (1997) 121-130.
[18] S. Ali A. Sajadi, Matthias Bastian, Helmut Sigel, J. Inorg. Biochem. 59(2,3) (1995) 139.
[19] Handbook of Chem. & Physics 55 (1975) D-129.
[20] J. L. Miranda, J. Felcman, Polyhedron, 22 (2003) 225- 233.
[21] J. Felcman, J.L. Miranda, J. Braz. Chem. Soc. 8 (1997) 575.
[22] D. Voet, Biochemistry, John Wiley, (1997) 560.
[23] IUPAC Stability Conatants Database, Release 3, version 3.02, coplied by L.D. Pettit, H.K. J. Powel, Academic Software Timble, UK, (1998).
[24] H. Irving, R.J.P. Williams, J. Chem. Soc., (1953) 3192-3210.
[25] T. Tsukihara, Y. Katsube, Bull. Chem.Soc. Jpn. 1972, 45, 1367.
[26] N. Torto, J. Mwatseteza and G. Sawula. Anal. Chim. Acta 456 (2001), p. 253.
[27] E.M. Janle, M. Cregor and J. Sojka. Curr. Separat. 19 (2001), p. 80.
[28] D.D. Allen and R. A Yokel. J. Neurochem. 58 (1992), p. 903.
[29] www.niddk.nih.gov.
[30] M. Guo, H. Zou, H. Wang, L. Kong and J. Ni. Anal. Chim. Acta 443 (2001), p. 91.
[31] G. Kiseleva, P.A. Kebets and P.N. Nesterenko. Analyst 126 (2002), p. 2119.
[32] S.M.C. Ritchie, L.G. Bachas, T. Olin, S.K. Sikdar and D. Bhattacharyya. Langmuir 15 (1999), p. 6346.
[33] J.J. Gooding, D.B. Hibbert and W. Yang. Sensors 1 (2001), p. 75.
[34] A. Battistoni, F. Pacello, A.P. Mazzetti, C. Capo, J.S. Kroll, P.R. Langford, A. Sansone, G. Donnarumma, P. Valenti and G. Rotilio. J.B.C. 276 (2001), p. 30315.
[35] S A Jablonski and C D Morrow, J Virol. 1995 March; 69(3): 1532–1539.
[36] Romualda Bregier-Jarzebowska, Anna Gasowska, and Lechos?aw Lomozik, Bioinorganic Chemistry and Applications, Volume 2008 (2008), Article ID 253971.
[37] The technology of achieving this structure is patented and was jointly developed by Elixir Industry, Las Vegas, NV 89104-7900, USA, and the Chinese National Institute of Pharmaceutical Industry.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.