Parameters Estimation of an Electric Fan Using ANN
Himanshu Vijay, D. K. Chaturvedi
DOI: 10.4236/jilsa.2010.21006   PDF    HTML     7,323 Downloads   13,457 Views   Citations


Electric Fans are very commonly used in the industries, domestic applications and in tunnels for cooling and ventila-tion purposes. Fan parameters estimation is an important task as far as the reliable operation of a fan system is con-cerned. Basically, a fan is mainly consisting of a single phase induction motor and therefore fan system parameters are essentially the electrical parameters e.g. resistances, reactances and some load parameters (fan blades).These parame-ters often change under varying operating conditions and the knowledge of these parameters is necessary to have opti-mum and efficient operation of the system. Therefore, fan system parameters are required to be estimated. Further, fan system parameters estimation is required to ensure the smooth system operation and to avoid any malfunctioning of the system during abnormal working conditions. In this paper, Artificial Neural Networks (ANN) approach has been used for parameter estimation of a fan system. The simulated and experimental results are compared.

Share and Cite:

H. Vijay and D. Chaturvedi, "Parameters Estimation of an Electric Fan Using ANN," Journal of Intelligent Learning Systems and Applications, Vol. 2 No. 1, 2010, pp. 43-48. doi: 10.4236/jilsa.2010.21006.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] A. Arredondo, R. Partha, and W. Erin, “Implementing PWM fan speed control within a computer chassis power supply,” 20th Annual IEEE Applied Power Electronics Conference and Exposition, pp. 148–151, March 2005.
[2] I. Takahashi and T. Noguchi, “A new quick-response and high-efficiency control strategy of induction motor,” IEEE Transactions on IA, Vol. 22, No. 5, pp. 820–827, September/October 1986.
[3] S. F. Wang, R. Y. Chen, X. Fang and J. B. Wang, “Research on adjust speed control system of partial fan,” IEEE International Conference on Automation and Logistics, pp. 1053–1057, August 2007.
[4] AMCA Publication 203–90, “Field performance measurement of fan systems,” 0203X90A–S Arlington Heights, Ill.: the Air Movement and Control Association International, Inc. AMCA, 1990.
[5] B. K. Bose, “Expert systems, fuzzy logic, and neural network applications in power electronics and motion control,” Proceedings of IEEE, Vol. 82, pp. 1303–1323, August 1994.
[6] M. Calvo and O. P. Malik, “Machine parameter estimation as a pattern recognition problem,” Proceedings of IEEE Power Engineering Society Summer Meeting, Vancouver, BC, Canada, July 15th–19th, 2001.
[7] D. K. Chaturvedi, “Soft computing techniques and its applications in electrical engineering,” Springer, 2008.
[8] G. Daniel “Principles of artificial neural networks,” World Scientific Publishing Co. Pte. Ltd.
[9] R. D. Fard, M. Karrari, and O. P. Malik, “Synchronous generator model identification for control application using Volterra series,” IEEE Transactions on Energy Conversion., Vol. 20, No. 4, pp. 852–858, December 2005.
[10] K. S. Fu, Ed., “ANN application of pattern recognition,” Boca Raton, FL: CRC, 1982.
[11] H. Tsai, A. Keyhani, J. Demcko, and R. G. Farmer, “On- line synchronous machine parameter estimation from small disturbance operating data,” IEEE Transactions on Energy Conversion, Vol. EC–10, pp. 25–36, March 1995.
[12] H. B. Karayaka, A. Keyhani, G. T. Heydt, B. L. Agraval, and D. A. Selin, “Synchronous generator model identification and parameter estimation from operating data,” IEEE Transactions on Energy Conversion, Vol. 18, No. 1, pp. 121–126, March 2003.
[13] M. Karrari and O. P. Malik, “Identification of physical parameters of a synchronous generator from on-line measurements,” IEEE Transactions on Energy Conversion, Vol. 19, No. 2, pp. 407–415, June 2004.
[14] G. Kenne, T. Ahmed-Ali, L. F. Lagarrigue, and H. Nkwawo, “Nonlinear systems parameters estimation using radial basis function network,” Control Engineering Practice, Vol. 14, No. 7, pp. 819–832, 2006.
[15] W. S. Meisel, Computer-Oriented Approaches to Pattern Recognition, Academic Press, New York, 1972.
[16] D. Pitis, “Energy efficient single stage axial fan (ENEF),” IEEE Canada Electrical Power Conference, pp. 280–285, October 2007.
[17] D. K. Chaturvedi, “Modeling and simulation of systems using matlab/simulink@,” CRC Press, U.K., 2009.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.