Application of a Fuzzy Analytical Hierarchy Process for Predicting the Grindability of Granite ()

Zhengmei Zhang^{*}, Jing Wang^{}, Huiying Cao^{}, Qiuxia Lu^{}, Mingwei Ding^{}

Shandong Labor Vocational and Technology College, Jinan, China.

**DOI: **10.4236/wjet.2017.54B013
PDF
HTML XML
875
Downloads
1,465
Views
Citations

Shandong Labor Vocational and Technology College, Jinan, China.

The ranking system of grindability is the key technology for high-efficiency grinding granite. A new classification system is presented to evaluate and ranking the grindability of granite. On account of the complicated relation between the mineral composition and mechanical properties with the grindability of granite, a new method by the combination of Fuzzy Analytic Hierarchy Process (FAHP) method with TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) methods is developed to establish the dependence function and fuzzy relationship between SiO2 content, quartz content, Shore hardness, density, compressive strength, flexural strength and abrasion resistance of granite with grinding force. The grindability of ten types of granite was evaluated and classified by this method. With the fuzzy ranking system established and the grindability classification, it is very convenient to evaluate the grindability and select a suitable diamond tools and proper grinding parameters for a new granite type by only the petrographic analysis and mechanical properties testing.

Keywords

Grindability, Ranking, Granite, Fuzzy Analysis, Hierarchy Process

Share and Cite:

Zhang, Z. , Wang, J. , Cao, H. , Lu, Q. and Ding, M. (2017) Application of a Fuzzy Analytical Hierarchy Process for Predicting the Grindability of Granite. *World Journal of Engineering and Technology*, **5**, 117-125. doi: 10.4236/wjet.2017.54B013.

1. Introduction

The granite products have been widely used for its exquisite appearance, luxurious and elegant tones and wear resistance, corrosion resistance and other stable physical and chemical properties in the fields of architectural decoration, craft and art, life appliances, precision machine and development toward high-level, art and precision. But the granite is a natural rock material that consists of several minerals, so the grindability of different types of granite is different. The ranking system of granite grindability is very important for high-efficiency grinding key technology. Many experts have been studied the sawability of rocks and tried to conceive the ranking method for rocks. Reza Mikaeil proposed changes of motor power while cutting stone to stone sawing performance evaluation [1] [2] [3] [4]. Saffet Yagiz proposed to evaluate the brittleness of stone sawing of stone, and the use of fuzzy inference system and nonlinear regression to establish a mathematical model of sawing force [5]. Bulent Tiryaki used the specific cutting energy index to evaluate the machinability of the stone, and using artificial neural network prediction model [6] [7].

The aim of this paper is developing a new method by the combination of Fuzzy Analytic Hierarchy Process (FAHP) method with TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) methods is developed to establish the dependence function and fuzzy relationship between SiO_{2} content, quartz content, Shore hardness, density, compressive strength, flexural strength and abrasion resistance of granite with grinding force.

2. Applied Theoretical Concept

2.1. Theory of Triangular Fuzzy

In this study, the Fuzzy Analytic Hierarchy Process (FAHP) has been used. Let $X=\left\{{x}_{1},{x}_{2},{x}_{3}\cdots ,{x}_{n}\right\}$ be an object set, and $G=\left\{{g}_{1},{g}_{2},{g}_{3}\cdots ,{g}_{n}\right\}$ be a goal set, each object is taken, and extent analysis for each goal performed respectively. Therefore, m extent analysis values for each object can be obtained with ${M}_{gi}^{1}$ , ${M}_{gi}^{2}$ , ∙∙∙, ${M}_{gi}^{m}$ (i = 1, 2, ∙∙∙, n), where ${M}_{gi}^{j}\left(j=1,2,\cdots ,m\right)$ all are triangular fuzzy numbers(TFN). The steps of extent analysis can be given as in the following:

Step 1. The value of fuzzy synthetic extent with respect to the i object is defined as

${S}_{i}={\displaystyle \underset{j}{\overset{m}{\sum}}{M}_{gi}^{j}}\otimes {\left[{\displaystyle \underset{i=1}{\overset{n}{\sum}}{\displaystyle \underset{j=1}{\overset{m}{\sum}}{M}_{gi}^{j}}}\right]}^{-1}$ (1)

To obtain, the $\underset{j=1}{\overset{m}{\sum}}{M}_{gi}^{j}$ fuzzy addition operation of m extent analysis values for a particular matrix is performed as follows

$\underset{j}{\overset{m}{\sum}}{M}_{gi}^{j}}=\left({\displaystyle \underset{j=1}{\overset{m}{\sum}}{l}_{j},}{\displaystyle \underset{j=1}{\overset{m}{\sum}}{m}_{j},}{\displaystyle \underset{j=1}{\overset{m}{\sum}}{u}_{j}}\right)$ (2)

$\underset{i=1}{\overset{n}{\sum}}{\displaystyle \underset{j=1}{\overset{m}{\sum}}{M}_{gi}^{j}}}=\left({\displaystyle \underset{i=1}{\overset{n}{\sum}}{l}_{i},}{\displaystyle \underset{i=1}{\overset{n}{\sum}}{m}_{i},}{\displaystyle \underset{i=1}{\overset{n}{\sum}}{u}_{i}}\right)$ (3)

${\left[{\displaystyle \underset{i=1}{\overset{n}{\sum}}{\displaystyle \underset{j=1}{\overset{m}{\sum}}{M}_{gi}^{j}}}\right]}^{-1}=\left(\frac{1}{{\displaystyle \underset{i=1}{\overset{n}{\sum}}{u}_{i}}},\frac{1}{{\displaystyle \underset{i=1}{\overset{n}{\sum}}{m}_{i}}},\frac{1}{{\displaystyle \underset{i=1}{\overset{n}{\sum}}{l}_{i}}}\right)$ (4)

Step 2. As ${M}_{1}\left({l}_{1},{m}_{1},{u}_{1}\right)$ and ${M}_{2}\left({l}_{2},{m}_{2},{u}_{2}\right)$ are two triangular fuzzy numbers, the degree of possibility of ${M}_{1}\ge {M}_{2}$ is defined as

$V\left({M}_{1}\ge {M}_{2}\right)={\mathrm{sup}}_{x\ge y}\left[\mathrm{min}\left({\mu}_{{M}_{1}}\left(x\right),{\mu}_{M2}\left(y\right)\right)\right]$ (5)

and can be expressed as follows

$V\left({M}_{1}\ge {M}_{2}\right)=\mu \left(d\right)=\{\begin{array}{l}1,\text{}{m}_{1}\ge {m}_{2}\\ \frac{{l}_{2}-{u}_{1}}{\left({m}_{1}-{u}_{1}\right)-\left({m}_{2}-{l}_{2}\right)}\text{},\text{}{m}_{1}\le {m}_{2},\text{}{u}_{1}\ge {l}_{2}\\ 0,\text{otherwise}\end{array}\text{}$ (6)

Step 3. The degree of possibility for a convex fuzzy number to be greater than k convex fuzzy M_{i} (i = 1, 2, ∙∙∙, k) numbers can be defined by

$V\left(M\ge {M}_{1},{M}_{2},\cdots {M}_{k}\right)=\mathrm{min}V\left(M\ge {M}_{i}\right),\text{}i=1,2,\cdots k$ (7)

Assume that ${d}^{\prime}\left({A}_{i}\right)=\mathrm{min}V\left({S}_{i}\ge {S}_{k}\right)\text{}\left(k=1,2,\cdots m,\text{}k\ne i\right)$ , then the weight vector is given by

${W}^{\prime}={\left({d}^{\prime}\left({A}_{1}\right),{d}^{\prime}\left({A}_{2}\right),\cdots ,{d}^{\prime}\left({A}_{m}\right)\right)}^{T}$ (8)

where A_{i} (i = 1, 2, ∙∙∙, n) are i elements.

Step 4. Via normalization, the normalized weight vectors are

$W={\left(d\left({A}_{1}\right),d\left({A}_{2}\right),\cdots ,d\left({A}_{m}\right)\right)}^{T}$ (9)

where W is a non-fuzzy number.

2.2. TOPSIS Method

TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) is one of the useful multi-attribute decision making (MADM) techniques to manage real-world problems. According to this technique, the best alternative would be the one that is nearest to the positive ideal solution and farthest from the negative ideal solution. The positive ideal solution is a solution that maximizes the benefit criteria and minimizes the cost criteria, whereas the negative ideal solution maximizes the cost criteria and minimizes the benefit criteria. In short, the positive ideal solution is composed of all best attainable values of criteria, whereas the negative ideal solution consists of all worst attainable values of criteria. In this paper TOPSIS method is used for determining the final ranking of the sawability of carbonate rocks. TOPSIS method is performed in the following steps:

Step 1. Decision matrix is normalized via Equation (10)

${r}_{ij}=\frac{{f}_{ij}}{\sqrt{{\displaystyle \underset{i=1}{\overset{n}{\sum}}{f}_{ij}^{2}}}}\text{}i=1,2,\cdots n;\text{}j=1,2,\cdots ,m$ (10)

Step 2. Weighted normalized decision matrix is formed

${v}_{ij}={W}_{j}\times {r}_{ij}\text{}\text{\hspace{0.17em}}i=1,2,\cdots n;\text{}j=1,2,\cdots ,m$ (11)

Step 3. Positive Ideal Solution and Negative Ideal Solution are determined

${A}^{+}={\left\{{v}_{1}^{+},{v}_{2}^{+},{v}_{3}^{+},\cdots ,{v}_{m}^{+}\right\}}^{T},{v}_{j}^{+}=\underset{i}{\mathrm{max}}\left\{{v}_{ij}\right\},j=1,2,\cdots ,m$ (12)

${A}^{-}={\left\{{v}_{1}^{-},{v}_{2}^{-},{v}_{3}^{-},\cdots ,{v}_{m}^{-}\right\}}^{T},{v}_{j}^{-}=\underset{i}{\mathrm{min}}\left\{{v}_{ij}\right\},j=1,2,\cdots ,m$ (13)

Step 4. The distance of each alternative from A^{+} and A^{−} are calculated

${D}_{i}^{+}=\sqrt{{\displaystyle \underset{i=1}{\overset{n}{\sum}}{\left({v}_{j}^{+}-{v}_{ij}\right)}^{2}}}\text{\hspace{1em}}{D}_{i}^{-}=\sqrt{{\displaystyle \underset{i=1}{\overset{n}{\sum}}{\left({v}_{j}^{-}-{v}_{ij}\right)}^{2}}}\text{\hspace{1em}}$ (14)

Step 5. The closeness coefficient of each alternative is calculated

${C}_{i}=\frac{{D}_{i}^{-}}{{D}_{i}^{+}+{D}_{i}^{-}}\text{0}\le {C}_{\text{i}}\le 1$ (15)

Step 6. By comparing C_{i} values, the ranking of alternatives are determined.

3. Application of FAHP-TOPSIS Method to Multi-Criteria Comparison of Grindability

3.1. Granite Materials and Parameters

Test workpieces are selected typical granite materials. The SiO_{2} content, quartz content, Shore hardness, density, compressive strength, flexural strength and abrasion resistance are as the most granite important characteristics that affect grindability. In order to get the universal research conclusion, ten kinds of granite that widely used are chosen to experiment. These parameters are shown in Table 1.

3.2. Determination of Criteria Weights

The fuzzy judgment matrix is established about SiO_{2} content (C_{1}), quartz content (C_{2}), Shore hardness (C_{3}), density (C_{4}), compressive strength (C_{5}), flexural

Table 1. Material parameters of granites.

strength (C_{6}) and abrasion resistance (C_{7}) using pair-wise comparison. In the fuzzy AHP, fuzzy ratio scales are used to indicate the relative strength of the factors in the corresponding criteria. Therefore, a fuzzy judgment matrix can be constructed. The final scores of alternatives are also represented by fuzzy triangular numbers depicted over Saaty’s nine-point fundamental scale. A summary of the fuzzy linguistic variable set with triangular fuzzy numbers as well as with the definitions for aiding comparisons is provided in Table 2.

According to the grinding process goal of granite, the weights for the parameters of granites are analyzed. A comprehensive triangular fuzzy pair-wise comparison matrix is built as in Table 3.

The triangular fuzzy synthesis values S_{i} are calculated by using Equation (2), as in Table 4.

The fuzzy values are compared by using Equation (6), and the values of V are obtained. Then, priority weights are calculated by using Equation (7). After normalizing the priority weights the standardized weights are extracted, the results of priority weights and standardized weights are shown in Table 5.

Table 2. Fuzzy linguistic variable set and underlying fuzzy numbers.

Table 3. Triangular fuzzy pair-wise comparison matrix.

Table 4. Triangular fuzzy synthesis values.

Table 5. Results of priority weights and standardized weights.

3.3. Ranking the Grindability of Granite

The weights of C_{3}, C_{4} and C_{7} are zero from Table 5, it means that these parameters are nonobviously to affect the grindability of granite. The greatest significance parameters of C_{1}, C_{2}, C_{5} and C_{6} are selected to rank the grindability of granite. Decision matrix is normalized via Equation (10) and weighted normalized decision matrix is formed by using Equation (11). The values of decision matrix, normalized decision matrix and weighted normalized matrix are given in Table 6.

Positive and negative ideal solutions are determined by taking the maximum and minimum values for each criterion via Equations (12) and (13):

${A}^{+}=\left\{0.0192,0.1735,0.1376,0.0894\right\}$ , ${A}^{-}=\left\{0.0158,0.0810,0.0533,0.0357\right\}$

Then, the distance of each method from PIS (positive ideal solution) and NIS (negative ideal solution) with respect to each criterion are calculated, with the help of Equation (14). Then, closeness coefficient of each granite is calculated by using Equation (15) and the ranking of the granites are determined according to these values. The grindability ranking of granites are also shown in Table 7 and Figure 1 in the descending order of priority.

4. Laboratory Tests

4.1. Equipment and Parameters

The test machine is CNC Machining Center SPEED Y2000 imported from CMS Company in Italy. Cutting tool is diamond profiling wheel (ASS10105, produced by the You-oriented Company in Italy). The process parameters are the cutting speed (50 m/s), the feed speed (1000 mm/min) and cutting depth (14.5 mm). The grinding forces are measured to evaluate the grindability of granites.

Figure 1. The grindability ranking of granites based on C_{i}.

Table 6. Decision matrix, normalized decision matrix and weighted normalized matrix.

Table 7. Rankings of the grindability of granites according to C_{i} values.

4.2. Experimental Results and Data

The grinding force is regarded as the criterion of grindaility, and the evaluating criterion can be constituted. By laboratory tests the grinding forces were measured and the experimental results are shown in Table 8.

4.3. Data Analysis Results and Discussion

According to Table 8, the fifth granite in ranking is Liubu Red, it has a maximum value of grinding force. On the opposite side, Wulian Flower has a minimum value of grinding force. Contrast with Table 7, the relationship between grinding force and closeness coefficient of the studied granites (C_{i}) has a highly significant correlation. As grinding force increases, C_{i} value increases. These results confirm the results of new ranking. It is concluded that the new ranking method of granite is reasonable and acceptable for evaluating the grinding force of granites.

For evaluating the grindability and properly selecting the tool and grinding parameters for a new granite type, only the petrographic analysis and mechanical property testing are needed. Based on the data, the information about the grindability prediction can be obtained by data processing, statistical analysis and fuzzy operation instead of a number of grinding tests. This new ranking method of granite grindability by means of fuzzy mathematics is reasonable and acceptable.

5. Conclusions

1) The grindability is affected by the SiO_{2} content, quartz content, compressive strength and flexural strength of the granite.

2) The criteria of grindability, i.e. the grinding force is affected by the above mentioned factors in a different trend. So, the rights of the factors are distributed in different ways for evaluating the grindability using different criteria.

Table 8. Experimental results and evaluating criterion of grindability by grinding force.

3) The grinding force can be chosen as the criterion according to the need of production for ranking the grindability of a granite in order to select a suitable tool and the determine the optimum grinding parameters.

4) This new ranking method of granite grindability by means of fuzzy mathematics is reasonable and acceptable. For evaluating the grindability of a new granite type, only the petrographic analysis and mechanical property testing instead of a number of grinding tests are needed to obtain the information about the grindability prediction.

Acknowledgements

The research was financially supported by the Science and Technology Foundation of Shandong Labor Vocational and Technology College (Grant No. 2015KJZ003).

Conflicts of Interest

The authors declare no conflicts of interest.

[1] | Mikaeil, R., Yousefi, R. and Ataei, M. (2011) Sawability Ranking of Carbonate Rock Using Fuzzy Analytical Hierarchy Process and TOPSIS Approaches. Scientia Iranica B, 18, 1106-1115. https://doi.org/10.1016/j.scient.2011.09.009 |

[2] | Ataei, M., Mikaeil, R., Hoseinie, S.H. and Hosseini, S.M. (2012) Fuzzy Analytical Hierarchy Process Approach for Ranking the Sawability of Carbonate Rock. Rock Mechanics and Mining Sciences, 50, 83-93. https://doi.org/10.1016/j.ijrmms.2011.12.002 |

[3] | Reza, M., Mohammad, A. and Reza, Y. (2011) Application of a Fuzzy Analytical Hierarchy Process to the Prediction of Vibration during Rock Sawing. Mining Science and Technology, 21, 611-619. |

[4] | Mikaeil, R., Ozcelik, Y., Yousefi, R., Ataei, M. and Hosseini, S.M. (2013) Ranking the Sawability of Ornamental Stone Using Fuzzy Delphi and Multi-Criteria Decision-Making Techniques. International Journal of Rock Mechanics and Mining Sciences, 58, 118-126. https://doi.org/10.1016/j.ijrmms.2012.09.002 |

[5] | Yagiz, S. and Gokceoglu, C. (2010) Application of Fuzzy Inference System and Nonlinear Regression Models for Predicting Rock Brittleness. Expert Systems with Applications, 37, 2266-2272. https://doi.org/10.1016/j.eswa.2009.07.046 |

[6] | Tiryaki, B. (2008) Predicting Intact Rock Strength for Mechanical Excavation Using Multivariate Statistics, Artificial Neural Networks, and regression trees. Engineering Geology, 99, 51-60. https://doi.org/10.1016/j.enggeo.2008.02.003 |

[7] | Tiryaki, B. (2008) Application of Artificial Neural Networks for Predicting the Cuttability of Rocks by Drag Tools. Tunnellinng and Underground Space Technology, 23, 273-280. https://doi.org/10.1016/j.tust.2007.04.008 |

Journals Menu

Contact us

+1 323-425-8868 | |

customer@scirp.org | |

+86 18163351462(WhatsApp) | |

1655362766 | |

Paper Publishing WeChat |

Copyright © 2024 by authors and Scientific Research Publishing Inc.

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.