The Implementation of a High Efficiency Full-Bridge Converter
Joy Iong-Zong Chen
DOI: 10.4236/eng.2011.34038   PDF    HTML     13,012 Downloads   20,891 Views   Citations


A high efficiency full-bridge converter is investigated and implemented in this paper. The measured data result from the other converter implemented by IC UCC3895 is to compare with that of the previous converter. This full-bridge converter proposed and implemented converter can obtain about 96% power efficiency in conversion procedure when compared with that of 90%, which were ever published by the conventional techniques. Apart from, the L-C resonance circuits were developed and embedded into the popular PWM (pulse width modulation) power converter, which is referred as the soft-switching, so as to down sizing the volume of the IC which can totally reduces the power losses caused in the duration of a semi-con- ductor switching.

Share and Cite:

J. Chen, "The Implementation of a High Efficiency Full-Bridge Converter," Engineering, Vol. 3 No. 4, 2011, pp. 331-339. doi: 10.4236/eng.2011.34038.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] S. H. Chung, S. Y. Hui and W. H. Wang, “A Zero-Cur- rent-Switching PWM Fly-Back Converter with a Simple Aux-iliary Switch,” IEEE Transactions on Power Electronics, Vol. 14, No. 2, March 1999, pp. 329-342. doi:10.1109/63.750187
[2] Y. Xi and P. K. Jain, “A forward Converter Topology Employing a Resonant Auxiliary Circuit to Achieve Soft Switching and Power Transformer Resetting,” IEEE Tran- sactions on Industrial Electronics, Vol. 50, No. 1, February 2003, pp. 132-140.
[3] A. I. Pressman, “Switching Power Supply Design,” Switch-Tronix Power, Inc.
[4] P. Alou, J. A. Cobos, O. Garcia, R. Prieto and J. Uceda, “A New Driving Scheme for Synchronous Rectifiers: Single Winding Self-Driven Synchronous Rectification,” IEEE Transactions on Power Electronics, Vol. 16, No. 6, November 2001, pp. 803-810. doi:10.1109/63.974378
[5] B. S. Lim, H. J. Kim and W. S. Chung, “A Self-Driven Active Clamp Forward Converter Using the Auxiliary Winding of the Power Transformer,” IEEE Transactions on Circuits and System-II: Express Briefs, Vol. 51, No. 10, October 2004, pp. 549-551. doi:10.1109/TCSII.2004.836039
[6] M. T. Zhang, M. Jova-novic and F. C. Y. Lee, “Design Considerations and Perfor-mance Evaluations of Synchronous Rectification in Fly-Back Converters,” IEEE Transactions on Power Electronics, Vol. 13, No. 3, May 1998, pp. 538-546. doi:10.1109/63.668117
[7] N. Yamashita, N. Murakami, and T. Yachi, “Conduction Power Loss in MOSFET Synchronous Rectifier with Paral-lel-Connected Schottky Barrier Diode,” IEEE Transactions on Power Electronics, Vol. 13, No. 4, July 1998, pp. 667-673. doi:10.1109/63.704135
[8] M. Jovanovic, M. T. Zhang, and F. C. Lee, “Evaluation of Synchronous-Rectification Efficiency Improvement Limits in Forward Converters,” IEEE Transac-tions on Industrial Electronics, Vol. 42. No. 4, August 1995, pp. 387-395. doi:10.1109/41.402478
[9] Y. Panov and M. Jova-novic, “Design and Performance Evaluation of Low-Voltage/High-Current DC/DC On- Board Modules,” IEEE Transactions on Power Electronics, Vol. 16, No. 1, January 2001, pp. 26-33. doi:10.1109/63.903986
[10] B. I. Kwon, S. J. Park and S. C. Park, “Forward Converter Analysis by the Method of Coupling Electromagnetic Field with Hysteresis and Circuit Equations,” IEEE Transactions on Magnetics, Vol. 36, No. 4, July 2000, pp. 1426-1430.
[11] Y. Xi and P. K. Jain, “A Forward Converter Topology with Independently and Precisely Regulated Multiple Outputs,” IEEE Transactions on Power Electronics, Vol. 18, No. 2, March 2003, pp. 648-658.
[12] C.-S. Leu, “Improved Forward Topologies for DC-DC Applications with Built-In Input Filter,” Ph.D. Dissertation, Department of Electrical En-gineering, Blacksburg, Virginia, 24 January 2006.
[13] UCC3895 Data Sheet.
[14] Intersil ISL6754 Data Sheet.

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.