[1]
|
ACI Committee 318, “Building Code Requirements for Structural Concrete and Commentary (ACI 318-95 and 318R-95),” American Concrete Institute, Detroit, 2008.
|
[2]
|
A. Hillerborg, M. Modeer and P. E. Peterson, “Analysis of Crack Formation and Crack Growth in Concrete by Means of Fracture Mechanics and Finite Element,” Cement and Concrete Research, Vol. 6, No. 6, 1976, pp. 773-782. http://dx.doi.org/10.1016/0008-8846(76)90007-7
|
[3]
|
ACI Committee 446, “Fracture Mechanics of Concrete: Concepts, Models and Determination of Material Properties,” ACI 446.1R-91, Reported by ACI Committee 446, Detroit, 1991.
|
[4]
|
American Concrete Institute (ACI), “Finite Element Analysis of Fracture in Concrete Structures: State-of-theArt,” ACI 446.3R-97, Reported by ACI Committee 446, Detroit, 1997.
|
[5]
|
T. L. Anderson, “Fracture Mechanics, Fundamentals and Applications,” 2nd Edition, CRC Press, Washington DC, 1994.
|
[6]
|
Z. P. Bazant and J. Planas, “Fracture and Size Effects in Concrete and Other Quasibrittle Materials,” CRC Press, Washington DC, 1997.
|
[7]
|
ACI Committee 446, “Fracture Mechanics Applications to Concrete Structures and Implications with Regard to the Code,” American Concrete Institute, Detroit, 1992.
|
[8]
|
Y. R. Rashid. “Analysis of Pre-Stressed Concrete Pressure Vessels,” Nuclear Engineering and Design, Vol. 7, No. 4, 1968, pp. 334-355. http://dx.doi.org/10.1016/0029-5493(68)90066-6
|
[9]
|
Z. P. Bazant, “Comment on Hillerborg’s Comparison of Size Effect Law with Fictitious Crack Model,” Dei Poli Anniversary Volume, Politecnico di Milano, 1985, pp. 335-338.
|
[10]
|
ASCE Committee 447, “State of the Art Report on Finite Element Analysis of Reinforced Concrete,” American Society of Civil Engineers, New York, 1982, p. 545.
|
[11]
|
ASCE Committee 447, “State of the Art Report on Finite Element Analysis of Reinforced Concrete,” American Society of Civil Engineers, New York, 1994, p. 545.
|
[12]
|
Comite Euro-International du Beton (CEB) and the Federation Internationale de la Precontrainte (FIP), “CEBFIP Model Code 1990,” CEB Bulletin D’Information No. 213/214, Lausanne, 1993.
|
[13]
|
D. Coronelli and G. Mulas, “Modeling of Shear Behavior in Reinforced Concrete Beams,” ACI Structural Journal, Vol. 103, No. 3, 2006, pp. 372-382.
|
[14]
|
A. Hillerborg, “Analysis of One Single Crack,” In: F. H. Wittmann, Ed., Fracture Mechanics on Concrete, Development in Civil Engineering, Elsevier Science Publishers, Amsterdam, 1983, pp. 223-249.
|
[15]
|
Z. P. Bazant and V. S. Gopalaratnam, “Fracture Mechanics of Concrete: An Apercu of Basic Concepts and Models,” Proceedings of the First International Conference on Fracture Mechanics of Concrete Structures, Breckenridge, Colorado, 1-5 June 1992, pp. 145-154.
|
[16]
|
S. P. Shah, A. Fafitis and R. Arnold, “Cyclic Loading of Spirally Reinforced Concrete.” Journal of the Structural Division, Vol. 109, No. ST7, 1983, pp. 1695-1710. http://dx.doi.org/10.1061/(ASCE)0733-9445(1983)109:7(1695)
|
[17]
|
S. Hayashi and S. Kokusho, “Bond Behavior in the Neighborhood of the Crack,” Finite Element Analysis of Reinforced Concrete Structures; Proceedings of the Seminar Sponsored by the Japan Society for the Promotion of Science and the US National Science Foundation, Tokyo, 21-24 May 1985, pp. 364-373.
|
[18]
|
J. Ruppert, “A Delaunay Refinement Algorithm for Quality 2-Dimensional Mesh Generation,” Journal of Algorithms, Vol. 18, No. 3, 1995, pp. 548-585. http://dx.doi.org/10.1006/jagm.1995.1021
|
[19]
|
S. J. Owen, M. L. Staten, S. A. Canann and S. Saigal. “QMorph: An Indirect Approach to Advancing Front Quad Meshing,” International Journal for Numerical Methods in Engineering, Vol. 9, No. 44, 1999, pp. 1317-1340. http://dx.doi.org/10.1002/(SICI)1097-0207(19990330)44:9<1317::AID-NME532>3.0.CO;2-N
|
[20]
|
M. G. Khorasgany, “Size Effect in Shear Failure of Normal and High Strength RC Beams,” Ph.D. Dissertation, University of Missouri, Columbia, 1994.
|
[21]
|
M. G. Khorasgany and V. S. Gopalaratnam, “Shear Strength of Concrete—Size and Other Influences,” Size Effect in Concrete Structures: Proceedings of the Japan Concrete Institute International Workshop, Sendai, 31 October-2 November 1993, pp. 67-78.
|
[22]
|
V. S. Gopalaratman and S. P. Shah, “Softening Response of Plain Concrete in Direct Tension,” ACI Journal, Vol. 82, No. 3, 1985, pp. 310-323.
|
[23]
|
G. A. Riveros, V. S. Gopalaratnam and A. Chase, “User’s Guide: Fracture Mechanics Analysis of Reinforced Concrete Beams (FMARCB),” ERDC/ITL TR-08-1, US Army, Engineer Research and Development Center, Vicksburg, 2008.
|
[24]
|
P. E. Petterson, “Crack Growth and Development of Fracture Zone in Plane Concrete and Similar Materials,” Report No. TVBM-1006, Division of Building Materials, Lund Institute of Technology, Lund, 1981.
|
[25]
|
W. H. Gestle and M. Xie, “FEM Modeling of Fictitious Crack Propagation in Concrete,” Journal of Engineering Mechanics, Vol. 118, No. 2, 1992, pp. 416-434. http://dx.doi.org/10.1061/(ASCE)0733-9399(1992)118:2(416)
|
[26]
|
M. Keuser and G. Mehlborn, “Finite Element Models for Bond Problems,” Journal of Structural Engineering, Vol. 113, No. 10, 1987, pp. 2160-2173. http://dx.doi.org/10.1061/(ASCE)0733-9445(1987)113:10(2160)
|
[27]
|
A. C. Scordelis and D. Ngo, “Finite Element Analysis of Reinforced Concrete Beams,” ACI Journal, Vol. 64, No. 3, 1967, pp. 152-163.
|
[28]
|
A. Carpinteri, “Size Effect in Fracture Toughness Testing: A Dimensional Analysis Approach,” Proceedings of an International Conference on Analytical and Experimental Fracture Mechanics, Rome, 23-27 June 1980, pp. 785797.
|
[29]
|
J. C. Walreven. “Scale Effects in Beams without Reinforced Webs, Loaded in Shear,” Progress in Concrete Research, Annual Report, Vol. 1, No. 99, 1990, pp. 101112.
|
[30]
|
G. N. J. Kani, “How Safe Are Our Large Reinforced Concrete Beams?” Proceedings of ACI Structural Journal, Vol. 64, No. 3, 1967, pp. 128-141.
|