Wear Predictions of Metal Matrix Composite in Presence of Greasing Material


Aluminum-copper titanium di-boride [Al-4Cu-xTiB2] composite (x = 1%, 1.75%, 2.5%) is prepared successfully by centrifugal casting. Samples pin of diameter 8 mm, 10 mm, & 12 mm are prepared with help of special purpose die. An experimental parameter analysis is obtained for various load and speed combinations on pinon wear disc testing machine. A larger volume fraction of particles can be attained near the wear surface via centrifugal casting. The volume fraction of the heavier titanium di-boride is controlled by inertial forces upon centrifugal processing the semisolid composite. Mathematical Regression Analysis is carried out to calculate wear. Greasy material facilitates heat transfer on the counter side material. Comparative study facilitates wear predictions of Al-4Cu-xTiB2 metal matrix composite for various practical applications.

Share and Cite:

S. Gawal and V. Tungikar, "Wear Predictions of Metal Matrix Composite in Presence of Greasing Material," Energy and Power Engineering, Vol. 4 No. 3, 2012, pp. 173-177. doi: 10.4236/epe.2012.43024.

Conflicts of Interest

The authors declare no conflicts of interest.


[1] A. Mandal, R. Maiti, M. Chakraborty, B. S. Murty, “Effect of TiB2 Particles on Aging Response of Al-4Cu Alloy,” Material Science and Engineering: A, Vol. 386, No. 1-2, 2004, pp. 296-300. doi:10.1016/j.msea.2004.07.026
[2] T. Ogawa, Y. Watanabe, H. Sato, I.-S. Kim and Y. Fukui, “Theoretical Study on Fabrication of Functionally Graded Material with Density Gradient by Centrifugal Solid-Particle Mathod,” Composites Part A: Applied Science and Manufacturing, Vol. 37, No. 12, 2006, pp. 2194-2200. doi:10.1016/j.compositesa.2005.10.002
[3] S. Narendranaath, G. C. Mohankumar and P. G. Mukunda, “Effect of Mould Wall Thickness on rate of Solidification of Centrifugal Casting,” International Journal of Engineering Science and Technology, Vol. 2, No. 11, 2010, pp. 6092-6096.
[4] J. K. Kim and P. K. Rohatgi, “Interaction between Moving Cellular Solidification front and Graphite Particles during Centrifugal Casting”, Materials Science and Engineering: A, Vol. 244, No. 2, 1998, pp. 168-177. doi:10.1016/S0921-5093(97)00539-X
[5] S. Bahadur, “Fundamentals of Friction and Wear of Automobile Brake Materials”, Ph.D. Thesis, University Professor and Professor of Mechanical Engineering, Ames.
[6] I. G. Waston, M. F. Forster, P. D. Lee and R. J. Dashwood, “Investigation of The Clustering Behaviour of Titanium Diboride Particles in Aluminium,” Composites Part A: Applied Science and Manufacturing, Vol. 36, No. 9, 2005, pp. 1177-1187. doi:10.1016/j.compositesa.2005.02.003

Copyright © 2024 by authors and Scientific Research Publishing Inc.

Creative Commons License

This work and the related PDF file are licensed under a Creative Commons Attribution 4.0 International License.